FEP16AT-G-FEP16JT-G
TECHNICAL DATA
DATA SHEET 4842,REV.- FEP16AT-G-FEP16JT-G
ULTRAFAST PLASTIC RECTIFIER
Mechanical Data
•
Case: JEDEC TO-220AB molded plastic body over passivated chips
•
Terminals: Plated leads solderable per MIL-STD-750, Method 2026
•
Polarity: As marked
•
Mounting Position: Any
•
Mounting Torque: 5 in. - lbs. max.
•
Weight: 0.08 ounce, 2.24 grams
Features:
• Low forward voltage drop
• High surge current capacity
• High current capability
• High reliability
• Superfast recovery times for high efficiency
• Dual rectifier construction, positive centertap
Case styles
TO-220AB
Mechanical Dimensions: In Inches / mm
TO-220AB
SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court ! Deer Park, NY 11729-4681 ! (631) 586- 7600 FAX (631) 242-9798 •
• World Wid e We b Site - http: //www.se nsitro n.c om • E-Mail Address - sales@sensitr on. com •
Green Products in Compliance with the RoHS Directive
Green Products
FEP16AT-G-FEP16JT-G
Maximum Ratings and Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise noted.
FEP FEP FEP FEP FEP FEP FEP FEP
Parameter Symbol 16AT-G 16BT-G 16CT-G 16DT-G 16FT-G 16GT-G 16HT-G 16JT-G Unit
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V
Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V
Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V
Maximum average forward rectified current IF(AV) 16 A
at TC = 100°C
Peak forward surge current
8.3 ms single halfsine wave superimposed IFSM 200 A
on rated load (JEDEC method)
Typical thermal reisistance (NOTE 3) RΘJA 15.0 °C/W
RΘJC 2.2
Operating junction TJ,TSTG -55 to +150 °C/W
and storage temperature range
Electrical Characteristics FEP FEP FEP FEP FEP FEP FEP FEP
per leg at 8.0 A
Maximum DC reverse current at TC= 25°C IR10 µA
rated DC blocking voltage per leg TC=100°C 500
Maximum reverse recovery time per leg (NOTE 1) trr 35 50 ns
Typical junction capacitance per leg (NOTE 2) CJ85.0 60 pF
NOTES: (1) Reverse recovery test conditions: IF= 0.5 A, IR= 1.0 A, Irr = 0.25 A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 V
(3) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink
SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court ! Deer Park, NY 11729-4681 ! (631) 586- 7600 FAX (631) 242-9798 •
• World Wid e We b Site - http: //www.se nsitro n.c om • E-Mail Address - sales@sensitr on. com •
Data Sheet 4842, Rev. - Green Products
Maximum instantaneous forward voltage VF0.95 1.3 1.5 V
Parameter Symbol 16AT-G 16BT-G 16CT-G 16DT-G 16FT-G 16GT-G 16HT-G 16JT-G Unit
Pulse
Generator
(Note 2)
50Ω
NONINDUCTIVE 50Ω
NONINDUCTIVE
DUT
(-)
(+)
OSCILLOSCOPE
(Note 1)
50Ω
NONINDUCTIVE
50V
(approx)
Reverse Recovery Time Characterstic and Test Circuit Diagram
1.0cm SET TIME BASE FOR
trr
+ 0 .5A
0
-0.25A
-1.0A
5/ 10 ns/ cm
0 25 50 75 100 125 150 175
0
4
8
12
16
20
Ambient Temperature [ºC]
Average Rectified Forward Current, IF [A]
SINGLE PHASE
HALF WAVE
60HZ
RESISTI VE O R
INDUCTIVE LOA D
.375 " (9 .0 m m) LEAD
LENGTHS
Reverse Characteristics
0 20 40 60 80 100 120 140
0.1
1
10
100
1000
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR [mA]
T = 25 C
º
A
T = 10 0 C
º
A
12 51020 50100
0
40
80
120
160
200
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
0.01
0.1
1
10
100
Forward Voltage, VF [V]
Forward Current, IF [A]
P ulse Wi dth = 300 µ
µµ
µs
2% Duty Cycle
T = 25 C
º
A
FEP16AT-FEP16DT
FEP16FT-FEP16JT
1 2 5 10 20 50 100
40
50
60
70
80
90
100
Reverse Voltage, VR [V]
Total Capacitance, CT [pF]
FEP16FT-FEP16JT
FEP16AT-FEP16DT
Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current
Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs Reverse Voltage
Figure 5. Total Capacitance
SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court ! Deer Park, NY 11729-4681 ! (631) 586- 7600 FAX (631) 242-9798 •
• World Wid e We b Site - http: //www.se nsitro n.c om • E-Mail Address - sales@sensitr on. com •
FEP16AT-G-FEP16JT-G
Data Sheet 4842, Rev. - Green Products
• 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 •
• World Wid e We b Site - http: //www.se nsitro n.c om • E-Mail Address - sales@sensitr on. com •
Data Sheet 4842, Rev. –
SENSITRON
SEMI CONDUCTOR
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest
version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
FEP16AT-G-FEP16JT-G
Green Products
