Ordering number:ENN6078A PNP/NPN Epitaxial Planar Silicon Transistors CPH3109/CPH3209 DC/DC Converter Applications Applications Package Dimensions * Relay drivers, lamp drivers, motor drivers, strobes. unit:mm 2150A Features [CPH3109/CPH3209] 2.9 0.15 0.6 0.4 0.2 * Adoption of MBIT processes. * Large current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). * High allowable power dissipation. 3 2 1 2.8 0.6 1.6 0.05 0.2 1.9 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 Specifications ( ) : CPH3109 Absolute Maximum Ratings at Ta = 25C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Conditions Ratings Unit VCBO VCEO (-30)40 V (-)30 V VEBO IC (-)5 V (-)3 A ICP (-)5 Base Current IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Mounted on a ceramic board (600mm2x0.8mm) A (-)600 mA 0.9 W 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(-)30V, IE=0 (-)0.1 A Emitter Cutoff Current IEBO VEB=(-)4V, IC=0 (-)0.1 A DC Current Gain hFE VCE=(-)2V, IC=(-)500mA fT VCE=(-)10V, IC=(-)500mA Gain-Bandwidth Product Output Capacitance Cob 200 VCB=(-)10V, f=1MHz 560 (380) MHz 450 MHz (25)20 Marking : CPH3109 : AJ, CPH3209 : CJ pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31201TS KT/41000TS (KOTO) TA-1721 No.6078-1/5 CPH3109/CPH3209 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage VCE(sat)1 IC=(-)1.5A, IB=(-)30mA VCE(sat)2 VBE(sat) IC=(-)1.5A, IB=(-)75mA IC=(-)1.5A, IB=(-)30mA Collector-to-Base Breakdown Voltage V(BR)CBO IC=(-)10A, IE=0 Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(-)1mA, RBE= Emitter-to-Base Breakdown Voltage Turn-ON Time V(BR)EBO ton Storage Time tstg See specified test circuit. tf See specified test circuit. Fall Time Ratings Conditions min Unit typ max (-155) (-230) mV 120 180 mV (-)105 (-)155 mV (-)0.83 (-)1.2 V (-30) V 40 V (-)30 V IE=(-)10A, IC=0 (-)5 See specified test circuit. V (50)30 ns (270) ns 300 ns (25)15 ns Switching Time Test Circuit I B1 PW=20s OUTPUT I B2 DC1% INPUT RB 50 24 VR 20IB1=-20IB2=IC=500mA + + 100F 470F -5V 12V (For PNP, the polarity is reversed.) I C - VCE A -10m -8.0mA A -2 -1.6 -6.0mA -1.2 -4.0mA -0.8 -2.0mA -0.4 1.6 A m 50mA A 0m I C - VCE 2.0 CPH3109 Collector Current, IC - A -30mA -40mA -50m Collector Current, IC - A -2.0 10 mA A 6.0m 8.0 4.0mA 1.2 40mA 30mA 20mA 0.8 2.0mA 0.4 CPH3209 -200 -400 -600 -800 0 0 -1000 Collector-to-Emitter Voltage, VCE - mV -25C Ta=75 C -1.0 3.0 2.5 2.0 1.5 1.0 0.5 -0.5 0 1000 CPH3209 VCE=2V Ta=75C 25C -2.5 -1.5 800 3.5 Collector Current, IC - A Collector Current, IC - A -3.0 -2.0 600 I C - VBE 4.0 CPH3109 VCE=-2V -3.5 400 Collector-to-Emitter Voltage, VCE - mV I C - VBE -4.0 IB=0 200 25C 0 -25C 0 IB=0 0 -0.2 -0.4 -0.6 -0.8 -1.0 Base-to-Emitter Voltage, VBE - V -1.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE - V No.6078-2/5 CPH3109/CPH3209 hFE - I C 1000 7 Ta=75C 5 5 DC Current Gain, hFE DC Current Gain, hFE -25C 25C 100 7 5 7 5 2 5 7 -0.1 2 3 5 7 -1.0 2 3 10 0.01 5 7 -10 2 5 7 0.1 3 Collector Current, IC - A Gain-Bandwidth Product, f T - MHz Gain-Bandwidth Product, f T - MHz 3 2 100 7 5 3 2 2 3 5 7 -100 2 3 5 7 -1000 2 5 3 2 100 7 5 3 2 10 10 3 2 3 5 Output Capacitance, Cob - pF 7 5 3 2 7 -10 3 2 3 2 C 75 Ta= 5C C 2 5 -2 3 2 -0.01 7 5 3 2 -0.001 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 Collector Current, IC - A 5 7 1000 2 3 2 3 5 7 -10 100 7 5 3 2 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB - V VCE(sat) - IC 1.0 7 5 CPH3109 IC / IB =20 -0.1 7 5 3 CPH3209 f =1MHz 10 1.0 5 VCE(sat) - IC -1.0 7 5 Collector-to-Emitter Saturation Voltage, VCE(sat) - V 5 Collector-to-Base Voltage, VCB - V Collector-to-Emitter Saturation Voltage, VCE(sat) - V Output Capacitance, Cob - pF 100 3 2 Cob - VCB 2 CPH3109 f =1MHz 2 7 100 Collector Current, IC - mA Cob - VCB 10 -1.0 5 7 10 3 CPH3209 VCE=10V Collector Current, IC - mA 2 2 7 5 10 -10 5 7 1.0 3 fT - IC 1000 CPH3109 VCE=-10V 7 2 Collector Current, IC - A fT - IC 1000 25C 100 3 3 -25C 2 2 2 Ta=75C 3 3 10 -0.01 CPH3209 VCE=2V 7 3 2 hFE - I C 1000 CPH3109 VCE=-2V CPH3209 IC / IB =20 3 2 0.1 7 5 75 C Ta= 3 2 C -25 0.01 7 5 25 C 3 2 0.001 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC - A No.6078-3/5 CPH3109/CPH3209 VCE(sat) - IC 3 2 -1.0 7 5 3 2 C 75 Ta= C 25 C -25 -0.1 7 5 3 2 -0.01 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 VCE(sat) - IC 10 7 5 CPH3109 IC / IB =50 Collector-to-Emitter Saturation Voltage, VCE(sat) - V Collector-to-Emitter Saturation Voltage, VCE(sat) - V -10 7 5 7 -10 CPH3209 IC / IB =50 3 2 1.0 7 5 3 2 75 0.1 7 5 = Ta -25 3 2 0.01 0.01 2 3 5 7 0.1 Collector Current, IC - A 5 3 2 Ta=-25C 25C 75C 5 3 2 -0.1 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 3 2 Collector Dissipation, PC - W Collector Current, IC - A 2 s 3 s 10 op 0 DC ms 0 10 1.0 7 5 0.1 7 5 s 50 1m 0m er s at io n CPH3109/3209 Ta=25C Single pulse For PNP, minus sign is omitted. 2 3 5 7 1.0 2 3 5 7 10 7 10 2 Ta=-25C 1.0 7 25C 75C 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 PC - Ta CPH3109/3209 1.0 M 0.9 ou nte 0.8 do na ce ram 0.6 ic bo ard (6 00 0.4 mm 2 x0 .8m m) 0.2 Mounted on a ceramic board(600mm2x0.8mm) 0.01 0.1 5 3 1.2 2 3 Collector Current, IC - A 10 3 2 5 0.1 0.01 5 7 -10 A S O I CP =5A I C =3A 7 1.0 CPH3209 IC / IB =50 Collector Current, IC - A 10 7 5 C 7 Base-to-Emitter Saturation Voltage, VBE (sat) - V Base-to-Emitter Saturation Voltage, VBE (sat) - V 7 7 5 C VBE(sat) - IC 10 CPH3109 IC / IB =50 -1.0 3 25 Collector Current, IC - A VBE(sat) - IC -10 2 C 2 Collector-to-Emitter Voltage, VCE - V 3 5 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 No.6078-4/5 CPH3109/CPH3209 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2001. Specifications and information herein are subject to change without notice. PS No.6078-5/5