RAIL /// TTDS-256 –ISSUE 5 T200-IDENT-PRINTER
PAGE 1
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
T200 IDENT
PRINTER
BUDGET THERMAL
TRANSFER PRINTER
The T200 Ident printer is a budget thermal transfer printer.
Designed to print on a wide range of TE Connectivity (TE) identification marker sleeves,
cable markers, and labels. This light weight, low cost printer replaces the T212M-
PRINTER.
TECHNICAL DATASHEET
TTDS-256 issue 5, February 2015
RAIL /// TTDS-256 –ISSUE 5 T200-IDENT-PRINTER
PAGE 2
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
TECHNICAL DATA SHEET
TTDS-256
High accuracy printing
Easy to use
Light weight
Small footprint
Easy to fit accessories
Touch screen
Software version available
Features
Applications
Office environment
Light Industrial environment
Environmental
Further information and a downloadable declaration covering RoHS and REACH compliance
can be found at the ‘TE Product Compliance Support Centre’:
http://www.te.com/en/resources/product-compliance.html
Approvals / Declarations
Specifications
CE
FCC Class A
CB
CCC
UL
GOST
KC
The printer’s 300dpi resolution combined with recommended media and Thermal Transfer ribbons, meet all relevant TE
RW performance specifications.
Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used.
The current list of printers and ribbons can be found in
TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found at the
TE document centre: http://www.te.com/commerce/DocumentDelivery/DDEController
RAIL /// TTDS-256 –ISSUE 5 T200-IDENT-PRINTER
PAGE 3
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
TECHNICAL DATA SHEET
TTDS-256
PRINTER ORDERING INFORMATION
PRINTER PROPERTIES PERFORMANCE
PRINT SPEED30, 40, 50, 75, 100, 125mm/s. (1, 1.5, 2, 3, 4, 5 in/s)
PRINT WIDTH MAX:105.7mm (4.2in)
PRINT DEFINITION:300 dpi Thermal Transfer
LABEL WIDTH5 to 120mm (0.16 to 4.2 in), 116mm (4.6 in) backing paper width
LABEL HEIGHT5mm (0.2 in) minimum to 1,000mm (39.4 in) maximum
MEDIA ROLL CAPACITY152mm (6.0 in) Outside Diameter, inside core diameter 38 – 76mm
(1.5 – 3 in)
INK RIBBONS25.4mm (1 inch) core, ink inside or outside, variable length up to
360M (1181 ft)
CUT MODECutter & Perforator available as accessories.
SENSORVariable position Gap & Reflective (automatic calibration)
ELECTRICAL REQUIREMENTS100 to 240V - 50/60Hz, PFC
OPERATING TEMPERATURE+5°C to +40°C (+41°F to +104°F).
OPERATING HUMIDITY10% to 85% non-condensing RH
POWER CONSUMPTIONPower save mode 1.8W
Typical 45W / Max 100W
PHYSICAL CHARACTERISTICSDepth: 322mm (12.7 inches)
Height: 189mm (7.4 inches)
Width: 253mm (10.0 inches)
Weight: 4kg (8.8 lb)
PERFORATOR/CUTTERPerforator: maximum product width 5 - 45mm (0.2 - 1.8 in).
Cutter: maximum product width 5 - 85mm (0.2 - 3.3 in).
Perforator/Cutter: 200 cuts/perforations per minute. Cut/
Perforate length 5 - 1000mm
INTERFACESUSB 2.0 High speed slave for PC connection at the rear of the printer
USB master 1 at rear of the printer (Up to 500mA), 2 at front of
printer (Up to 100mA)
RS232 C 1.200 up to 230.400 Baud rate / 8 Bit
Ethernet 10 / 100 Base T, LPD, Raw IP-Printing, ftp-Printing, DHCP,
HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
ELECTRONICSRAM 64MB, Processor speed 400MHz, Memory IFFS flash 16MB
DESCRIPTION PART NUMBER
T200-IDENT-PRINTER EC6996-000
T200-IDENT-SWARE-PRINTER EC6997-000
300 dpi Printhead
DescriptionT200-IDENT-PRINTHEAD
Part numberEC8927-000
Drive roller
Part numberT200-IDENT-DR4-DRIVEROLLER
DescriptionEC8926-000
PRINTER SPARE PARTS ORDERING INFORMATION (consumables)
RAIL /// TTDS-256 –ISSUE 5 T200-IDENT-PRINTER
PAGE 4
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
TECHNICAL DATA SHEET
TTDS-256
PRINTER ACCESSORY ORDERING INFORMATION
Cutter
Description:T200-IDENT-CUTTER
Part number:EC8456-000
Perforator:
Description:T200-IDENT-PERFORATOR
Part number:EC8869-000
Universal Payoff
Description:PRINTER-UNIVERSAL-PAYOFF
Part number:EC9926-000
For more details regarding printer accessories please consult TTDS-260, and for more details
concerning the Universal payoff please consult TTDS-259.
T200 Ident printer fitted with
Cutter/Perforator.
WINTOTAL 6 (Dongle)
DescriptionWINTOTAL-6-DONGLE
Part numberEC9816-000
WINTOTAL 5 (Dongle)
DescriptionWINTOTAL-5-DONGLE
Part numberED4097-000
Printeasy 5 Express
DescriptionPEP-5-Express
Part numberCC6161-000
Printeasy 5 Pro
DescriptionPEP-5-Pro
Part numberCC6174-000
Printeasy 5 Suite
DescriptionPEP-5-Suite
Part numberCC6178-000
SOFTWARE ORDERING INFORMATION
T200 Ident printer with the Universal payoff
RAIL /// TTDS-256 –ISSUE 5 T200-IDENT-PRINTER
PAGE 5
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
TECHNICAL DATA SHEET
TTDS-256
te.com
TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks
of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connec-
tivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE
Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising
out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for
the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
SOFTWARE
Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the
TE product store:
http://www.te.com/en/general/label-printing-software.html
Contact a TE representative for further information
