NSBC114EDXV6T1, NSBC114EDXV6T5 Dual Bias Resistor Transistors NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network http://onsemi.com (3) The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. These digital transistors are designed to replace a single device and its external resistor bias network. The BRT eliminates these individual components by integrating them into a single device. In the NSBC114EDXV6T1 series, two BRT devices are housed in the SOT-563 package which is ideal for low power surface mount applications where board space is at a premium. (2) R1 (1) R2 Q1 Q2 R2 (4) R1 (5) (6) NSBC114EDXV6T1 Features * * * * * * Simplifies Circuit Design Reduces Board Space Reduces Component Count Lead-Free Solder Plating These are Pb-Free Devices NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable MAXIMUM RATINGS MARKING DIAGRAM SOT-563 CASE 463A 1 xx M G 1 xx = Device Code (Refer to Page 2) M = Date Code G = Pb-Free Package ORDERING INFORMATION (TA = 25C unless otherwise noted, common for Q1 and Q2) Device Package Shipping Symbol Value Unit Collector-Base Voltage VCBO 50 Vdc NSBC1xxxDXV6T1 SOT-563 4000/Tape & Reel Collector-Emitter Voltage VCEO 50 Vdc NSBC1xxxDXV6T1G SOT-563 4000/Tape & Reel IC 100 mAdc Rating Collector Current THERMAL CHARACTERISTICS Characteristic (One Junction Heated) Symbol Max Unit PD 357 (Note 1) 2.9 (Note 1) mW mW/C Thermal Resistance, Junction-to-Ambient RqJA 350 (Note 1) C/W Characteristic (Both Junctions Heated) Symbol Max Unit PD 500 (Note 1) 4.0 (Note 1) mW mW/C RqJA 250 (Note 1) C/W TJ, Tstg -55 to +150 C Total Device Dissipation; TA = 25C Derate above 25C Total Device Dissipation; TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature Range NSVBC1xxxDXV6T1G SOT-563 4000/Tape & Reel NSBC1xxxDXV6T5 SOT-563 8000/Tape & Reel NSBC1xxxDXV6T5G SOT-563 8000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking table on page 2 of this data sheet. 1. FR-4 @ Minimum Pad (c) Semiconductor Components Industries, LLC, 2012 September, 2012 - Rev. 7 1 Publication Order Number: NSBC114EDXV6/D NSBC114EDXV6T1, NSBC114EDXV6T5 DEVICE MARKING, ORDERING, AND RESISTOR VALUES Device Package* Marking R1 (kW) R2 (kW) NSBC114EDXV6T1 SOT-563 7A 10 10 NSBC124EDXV6T1 / NSVBC124EDXV6T1G SOT-563 7B 22 22 NSBC144EDXV6T1 SOT-563 7C 47 47 NSBC114YDXV6T1 SOT-563 7D 10 47 NSBC114TDXV6T1 (Note 2) SOT-563 7E 10 NSBC143TDXV6T1 (Notes 2) SOT-563 7F 4.7 NSBC113EDXV6T1 (Note 2) SOT-563 7G 1.0 1.0 NSBC123EDXV6T1 (Notes 2) SOT-563 7H 2.2 2.2 NSBC143EDXV6T1 (Notes 2) SOT-563 7J 4.7 4.7 NSBC143ZDXV6T1 (Notes 2) SOT-563 7K 4.7 47 NSBC124XDXV6T1 (Notes 2) SOT-563 7L 22 47 NSBC123JDXV6T1 (Note 2) SOT-563 7M 2.2 47 NSBC115EDXV6T1 (Notes 2) SOT-563 7N 100 100 NSBC144WDXV6T1 (Notes 2) SOT-563 7P 47 22 The "G'' suffix indicates Pb-Free package available. *This package is inherently Pb-Free. 2. New resistor combinations. Updated curves to follow in subsequent data sheets. ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, common for Q1 and Q2) Symbol Min Typ Max Unit Collector-Base Cutoff Current (VCB = 50 V, IE = 0) ICBO - - 100 nAdc Collector-Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO - - 500 nAdc Emitter-Base Cutoff Current (VEB = 6.0 V, IC = 0) IEBO - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0.5 0.2 0.1 0.2 0.9 1.9 4.3 2.3 1.5 0.18 0.13 0.2 0.05 0.13 mAdc Collector-Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO 50 - - Vdc Collector-Emitter Breakdown Voltage (Note 3) (IC = 2.0 mA, IB = 0) V(BR)CEO 50 - - Vdc Characteristic OFF CHARACTERISTICS NSBC114EDXV6T1 NSBC124EDXV6T1 / NSVBC124EDXV6T1G NSBC144EDXV6T1 NSBC114YDXV6T1 NSBC114TDXV6T1 NSBC143TDXV6T1 NSBC113EDXV6T1 NSBC123EDXV6T1 NSBC143EDXV6T1 NSBC143ZDXV6T1 NSBC124XDXV6T1 NSBC123JDXV6T1 NSBC115EDXV6T1 NSBC144WDXV6T1 3. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0% http://onsemi.com 2 NSBC114EDXV6T1, NSBC114EDXV6T5 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, common for Q1 and Q2) (Continued) Characteristic Symbol Min Typ Max Unit hFE 35 60 80 80 160 160 3.0 8.0 15 80 80 80 80 80 60 100 140 140 350 350 5.0 15 30 200 150 140 150 140 - - - - - - - - - - - - - - VCE(sat) - - 0.25 - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 VOH 4.9 - - Vdc R1 7.0 15.4 32.9 7.0 7.0 3.3 0.7 1.5 3.3 3.3 15.4 1.54 70 32.9 10 22 47 10 10 4.7 1.0 2.2 4.7 4.7 22 2.2 100 47 13 28.6 61.1 13 13 6.1 1.3 2.9 6.1 6.1 28.6 2.86 130 61.1 kW 0.8 0.17 - 0.8 0.055 0.38 0.038 1.7 1.0 0.21 - 1.0 0.1 0.47 0.047 2.1 1.2 0.25 - 1.2 0.185 0.56 0.056 2.6 ON CHARACTERISTICS (Note 4) DC Current Gain (VCE = 10 V, IC = 5.0 mA) NSBC114EDXV6T1 NSBC124EDXV6T1 / NSVBC124EDXV6T1G NSBC144EDXV6T1 NSBC114YDXV6T1 NSBC114TDXV6T1 NSBC143TDXV6T1 NSBC113EDXV6T1 NSBC123EDXV6T1 NSBC143EDXV6T1 NSBC143ZDXV6T1 NSBC124XDXV6T1 NSBC123JDXV6T1 NSBC115EDXV6T1 NSBC144WDXV6T1 Collector-Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA) NSBC113EDXV6T1/NSBC123EDXV6T1 (IC = 10 mA, IB = 5 mA) NSBC114TDXV6T1/NSBC143TDXV6T1 (IC = 10 mA, IB = 1 mA) NSBC143EDXV6T1/NSBC143ZDXV6T1/NSBC124XDXV6T1 Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW) (VCC = 5.0 V, VB = 3.5 V, RL = 1.0 kW) (VCC = 5.0 V, VB = 5.5 V, RL = 1.0 kW) (VCC = 5.0 V, VB = 4.0 V, RL = 1.0 kW) NSBC114EDXV6T1 NSBC124EDXV6T1 / NSVBC124EDXV6T1G NSBC114YDXV6T1 NSBC114TDXV6T1 NSBC143TDXV6T1 NSBC113EDXV6T1 NSBC123EDXV6T1 NSBC143EDXV6T1 NSBC143ZDXV6T1 NSBC124XDXV6T1 NSBC123JDXV6T1 NSBC144EDXV6T1 NSBC115EDXV6T1 NSBC144WDXV6T1 Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW) (VCC = 5.0 V, VB = 0.050 V, RL = 1.0 kW) (VCC = 5.0 V, VB = 0.25 V, RL = 1.0 kW) VOL Vdc Vdc NSBC113EDXV6T1 NSBC114TDXV6T1 NSBC143TDXV6T1 NSBC143ZDXV6T1 Input Resistor NSBC114EDXV6T1 NSBC124EDXV6T1 / NSVBC124EDXV6T1G NSBC144EDXV6T1 NSBC114YDXV6T1 NSBC114TDXV6T1 NSBC143TDXV6T1 NSBC113EDXV6T1 NSBC123EDXV6T1 NSBC143EDXV6T1 NSBC143ZDXV6T1 NSBC124XDXV6T1 NSBC123JDXV6T1 NSBC115EDXV6T1 NSBC144WDXV6T1 Resistor Ratio NSBC114EDXV6T1/NSBC124EDXV6T1/NSVBC124EDXV6T1G NSBC144EDXV6T1/NSBC115EDXV6T1 NSBC114YDXV6T1 NSBC114TDXV6T1/NSBC143TDXV6T1 NSBC113EDXV6T1/NSBC123EDXV6T1/NSBC143EDXV6T1 NSBC143ZDXV6T1 NSBC124XDXV6T1 NSBC123JDXV6T1 NSBC144WDXV6T1 4. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0% http://onsemi.com 3 R1/R2 NSBC114EDXV6T1, NSBC114EDXV6T5 PD, POWER DISSIPATION (mW) 300 250 200 150 100 50 0 -50 RqJA = 833C/W 0 50 100 TA, AMBIENT TEMPERATURE (C) Figure 1. Derating Curve http://onsemi.com 4 150 NSBC114EDXV6T1, NSBC114EDXV6T5 1 1000 IC/IB = 10 hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS -- NSBC114EDXV6T1 TA=-25C 25C 0.1 75C 0.01 0.001 0 20 40 IC, COLLECTOR CURRENT (mA) VCE = 10 V TA=75C 25C -25C 100 10 50 1 10 IC, COLLECTOR CURRENT (mA) Figure 2. VCE(sat) versus IC Figure 3. DC Current Gain 100 IC, COLLECTOR CURRENT (mA) 2 1 0 0 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) 25C 75C f = 1 MHz IE = 0 V TA = 25C 1 0.1 0.01 0.001 50 TA=-25C 10 VO = 5 V 0 1 2 3 4 5 6 7 Vin, INPUT VOLTAGE (VOLTS) 10 VO = 0.2 V TA=-25C 25C 75C 1 0.1 0 10 8 9 Figure 5. Output Current versus Input Voltage Figure 4. Output Capacitance V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) 4 3 100 20 30 IC, COLLECTOR CURRENT (mA) 40 Figure 6. Input Voltage versus Output Current http://onsemi.com 5 50 10 NSBC114EDXV6T1, NSBC114EDXV6T5 1000 1 hFE, DC CURRENT GAIN (NORMALIZED) VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS -- NSBC124EDXV6T1 / NSVBC124EDXV6T1G IC/IB = 10 25C TA=-25C 0.1 75C 0.01 TA=75C 25C -25C 100 10 0.001 0 20 50 40 1 10 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 7. VCE(sat) versus IC Figure 8. DC Current Gain 4 100 IC, COLLECTOR CURRENT (mA) f = 1 MHz IE = 0 V TA = 25C 3 2 1 75C 25C TA=-25C 10 1 0.1 0.01 VO = 5 V 0 0 0.001 50 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) Figure 9. Output Capacitance 0 2 4 6 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=-25C 10 25C 75C 1 0.1 0 10 8 10 Figure 10. Output Current versus Input Voltage 100 V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) VCE = 10 V 20 30 40 50 IC, COLLECTOR CURRENT (mA) Figure 11. Input Voltage versus Output Current http://onsemi.com 6 NSBC114EDXV6T1, NSBC114EDXV6T5 10 1000 hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS -- NSBC144EDXV6T1 IC/IB = 10 1 25C TA=-25C 75C 0.1 VCE = 10 V TA=75C 25C -25C 100 0.01 0 10 50 20 40 IC, COLLECTOR CURRENT (mA) 10 IC, COLLECTOR CURRENT (mA) 1 Figure 12. VCE(sat) versus IC Figure 13. DC Current Gain 1 100 f = 1 MHz IE = 0 V TA = 25C IC, COLLECTOR CURRENT (mA) 0.4 TA=-25C 10 1 0.1 0.01 0.2 0 25C 75C 0.6 0 VO = 5 V 0.001 50 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) 0 Figure 14. Output Capacitance 2 4 6 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=-25C 10 25C 75C 1 0.1 0 10 8 10 Figure 15. Output Current versus Input Voltage 100 V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) 0.8 100 20 30 40 50 IC, COLLECTOR CURRENT (mA) Figure 16. Input Voltage versus Output Current http://onsemi.com 7 NSBC114EDXV6T1, NSBC114EDXV6T5 300 1 IC/IB = 10 hFE, DC CURRENT GAIN (NORMALIZED) VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS -- NSBC114YDXV6T1 TA=-25C 25C 0.1 75C 0.01 0.001 0 20 40 60 IC, COLLECTOR CURRENT (mA) TA=75C VCE = 10 250 25C 200 -25C 150 100 50 0 80 2 1 4 6 Figure 17. VCE(sat) versus IC 100 f = 1 MHz lE = 0 V TA = 25C 3 TA=75C IC, COLLECTOR CURRENT (mA) 3.5 2.5 2 1.5 1 0.5 0 2 4 6 8 10 15 20 25 30 35 VR, REVERSE BIAS VOLTAGE (VOLTS) 40 45 10 VO = 5 V 1 50 25C -25C 0 Figure 19. Output Capacitance 2 4 6 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=-25C 25C 75C 1 0.1 0 10 8 Figure 20. Output Current versus Input Voltage 10 V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) 90 100 Figure 18. DC Current Gain 4 0 8 10 15 20 40 50 60 70 80 IC, COLLECTOR CURRENT (mA) 20 30 IC, COLLECTOR CURRENT (mA) 40 Figure 21. Input Voltage versus Output Current http://onsemi.com 8 50 10 NSBC114EDXV6T1, NSBC114EDXV6T5 PACKAGE DIMENSIONS SOT-563, 6 LEAD CASE 463A ISSUE F D -X- 6 1 e A 5 4 2 3 L E -Y- b NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. HE DIM A b C D E e L HE C 5 PL 6 0.08 (0.003) M X Y MILLIMETERS MIN NOM MAX 0.50 0.55 0.60 0.17 0.22 0.27 0.08 0.12 0.18 1.50 1.60 1.70 1.10 1.20 1.30 0.5 BSC 0.10 0.20 0.30 1.50 1.60 1.70 INCHES NOM MAX 0.021 0.023 0.009 0.011 0.005 0.007 0.062 0.066 0.047 0.051 0.02 BSC 0.004 0.008 0.012 0.059 0.062 0.066 MIN 0.020 0.007 0.003 0.059 0.043 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 9 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSBC114EDXV6/D