Features
•0.1 % dc accuracy
•4-1⁄2 digit mode for precise measurements (20,000 counts)
•Measure up to 1000 V ac and dc
•Current measurements up to 10 A, 20 A for up to 30 seconds
•Built-in thermometer for temperature measurements when you
need them (temperature probe included)
•Resistance, continuity and diode test
•RPM measurements with inductive pickup (included)
•Millisecond pulse width measurements for fuel injectors
•Magnetic hanger to attach meter to the vehicle and free your
hands for other tasks
•Min/Max/Average recording with Min/Max Alert to capture
variations automatically
•Peak Min/Max to record transients as fast as 250 µs
•Relative mode to remove test lead resistance from low
ohms measurements
•Auto and manual ranging for maximum flexibility
•Autohold™to capture stable readings with only one touch of
the leads
•Large display digits and two-level bright white backlight for
increased visibility
•Analog bargraph to track changing or unstable signals
•Input Alert provides audible warning against wrong use of
input jacks
•Access door for fast battery changes without opening up the
case
•“Classic” design that fits your hand with new removable
holster, built-in test lead and probe storage
•10 meg ohm input impedance won’t damage computer circuits
•Limited lifetime warranty on meter, 1 year on accessories
Basic Accuracy (± % of reading)
Function Range Accuracy Best Resolution
DC Voltage 600 mV to 1000 V 0.1 % 0.01 mV
AC Voltage 600 mV to 1000 V 0.5 % 0.01 mV
DC Current 60 mA to 10 A 0.4 % 0.001 mA
AC Current 60 mA to 10 A 1.2 % 0.001 mA
Ohms 600 Ωto 50 MΩ0.4 % 0.01 Ω
Frequency199.99 Hz to 199.99 kHz 0.005 % 0.01 Hz
88 Series V/A Automotive
Meter Combo Kit
The Fluke 88V/A Kit is a complete automotive
diagnostic package. It offers virtually every-
thing you need in an automotive multimeter.
E
l
e
c
t
r
i
c
a
l
S
a
f
e
t
y
1000 V CAT III
600 V CAT IV
N10140
Specifications
Lifetime
Warranty
Limited
Powerful magnet holds meter to most steel surfaces
Ordering information
Fluke-88-V/A Automotive Meter
Combo Kit
88V/A Automotive Meter
Combo Kit Includes
•88V Automotive Multimeter
•TL224 1.5 m long heat resistant sili-
cone test leads
•TP220 removeable test probes to
correctly measure corroded terminals
•AC285 Alligator Clips
•TPAK Magnetic Hanger to position
and hold meter to steel surfaces
•80BK Temperature Probe
•RPM80 Inductive Pick-Up Probe
•2 Automotive Back Probe Pins
•Insulation Piercing Probe
•C800 Durable Carrying Case
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-51
16
Web access: http://www.fluke.com/
©2004 Fluke Corporation. All rights reserved.
Printed in U.S.A. 8/2004 2085038 D-US-N Rev B
Fluke. Keeping your world
up and running.
Optional accessories
Model Description
TLK281SureGrip™Automotive Test Lead Kit Complete set of test and measurement accessories designed
especially for automotive specialists.
TLK282 SureGrip™Deluxe Automotive Everything you can find in the TLK281 Automotive Test
Test Lead Kit Lead Kit, plus a few extras.
TP81 & TP82 Insulation Piercing Probes Set of stainless steel probe pierces insulation on 14, 16 and
18 gauge wire. Essential for use under hood or under dash.
Use it on fuel injectors or sensors while providing complete
insulation to grounding due to design.
TP40 Automotive Back Probe Pins Set of five flexible and formable 1-1/4 inch pin provides an
easy connection past weather pack seals to connector
conductors. A must-have for fuel injectors, TPS and MAP
sensors, as well as for any underhood or under vehicle
connector with weather pack seals.
TP88 Rigid Back Probe Pins Set of one red and on black two inch long rigid back probe
pins easily pass between the weather pack seal and wire.
A sharp point ensures good contact to the electrical
connector, and the pin’s insulation protects it from shorting
to other wires.
TP84 Oxygen Sensor Insulation Piercing 12 inch long piercing probe extends your reach into a hot
Probes engine. Foot-long probe keeps your hands away from the
exhaust manifold.
PV350 Pressure Vacuum Transducer Use your general purpose meter to read compression, static
or running, as well as air pressure, engine vacuum,
transmission pressures as well as fuel pressure.
