Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
ALUMINUM ELECTROLYTIC CAPACITORS
VRseries
Miniature Sized
One rank smaller case sizes than VX series.
Compliant to the RoHS directive (2002/95/EC).
Radial Lead Type
Specifications
Type numbering system (Example : 10V 330
µ
F)
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem –40 to +85˚C(
6.3V to 400V), –25 to +85˚C(
450V)
6.3 to 450V
0.1 to 33000µF
±20% at 120Hz, 20˚C
Printed with white color letter on black sleeve.
After storing the capacitors under no load at 85˚Cfor 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
VR
Rated voltage
(
V)
tan δ
(MAX.)
6.3
0.28 10
0.24 16
0.20 25
0.16 35
0.14 50
0.12 63
0.10 100
0.08
160 to 315
0.20
350 to 450
0.25
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.Measurement frequency : 120Hz, Temperature : 20˚C
Measurement frequency : 120Hz
Z–25˚C / Z
+
20˚C
Z–40˚C / Z
+
20˚C
Rated voltage
(
V)
Impedance ratio
ZT / Z20 (MAX.)
6.3
5
12
10
4
10
16
3
8
25
2
5
35
2
4
50
2
3
63
2
3
100
2
3
160 to 200
3
4
250 to 350
4
8
400
6
10
450
15
The specifications listed at right shall be met when
the capacitors are restored to 20°Cafter the rated
voltage is applied for 2000 hours at 85°C.
Rated voltage
(
V)
6.3
to
100V 160
to
450V
After 1 minute's application of rated voltage, leakage current
is not more than 0.03CV or 4 (µA), whichever is greater.
After 2 minutes' application of rated voltage, leakage current
is not more than 0.01CV or 3 (µA), whichever is greater.
After 1 minute's application of rated voltage,
CV <
= 1000
:1
=
0.1CV
+
40µA or less
After 1 minute's application of rated voltage,
CV
>
1000
:1
=
0.04CV
+
100 (µA) or less
Leakage current
tan δ
Capacitance change
Less than or equal to the initial specified value
200% or less than the initial specified value
Within ±20% of the initial capacitance value
High
Temperature
• Please refer to page 20 about the end seal configulation.
Smaller
CAT.8100Y