REVISIONS RESPECTIVE END ORIENTATIONS LTR OPPOSITE SIDE- DESIGNATED "O" DATE - INITIAL RELEASE A B ADDED .345" DIMENSION TO HEADER 1/5/98 4/1/99 CHANGED HEADER WIDTH FROM 1.00" TO 0.870" TO MATCH CURRENT PRODUCTION MOLDS 10/21/99 C ADDED EXAMPLE P/N 3/14/02 HEADER CREATING A PART NUMBER LENGTH CONNECTOR ORIENTATION WITH RESPECT TO CABLE STYLE A STYLE B 0.200" 0.120" 0.870" PS563 AB XXXX O PIN #1 C i.e. PS563AA0254S C 0.345" 0.010" EXAMPLE GIVEN INDICATES A 31 POS. CABLE ASSEMBLY TERMINATED WITH HIROSE CONNECTORS (P/N DF9C-31S-1V) IN WHICH PIN #1 TRACES TO PIN #1, ASSEMBLY IS 10.000" IN LENGTH, AND CONNECTORS ARE ON OPPOSITE SIDES OF CABLE AS DEFINED AT LEFT. PIN #1 0.660" 0.005" MATERIAL P NOTES 1) INSULATION: 0.002" THICK POLYESTER 2) CONDUCTORS: 0.003" X 0.011" (29 PLACES) 0.003" X 0.026" (2 PLACES, OUTER) 3) HEADER MATERIAL: DUPONT 612 NYLON 4) CONNECTOR: HIROSE P/N DF9C-31S-1V 5) CABLE RATING: AWM STYLE 20890 105C, 90V, VW-1 6) CABLE THICKNESS= 0.010"0.002" 7) CABLE WIDTH= 0.660"0.005" C.D. CURRENT REV CONNECTOR CONN./CABLE SPECIFICATION (CORRESPONDS TO DRAWING #) END 1 STYLE/ END 2/STYLE ASSEMBLY LENGTH (mm) LENGTH APPRVD RESPECTIVE END ORIENTATIONS SAME SIDE- DESIGNATED "S" DESCRIPTION TOLERANCES DR DATE C.Dobens LAMINATED CABLE DIVISION 1/5/98 CHK END DETAILS FOR TERMINATING CABLE WITH 31 POS. S/M HIROSE CONNECTORS .XXX .XX ENG ANGLES APPD ARLEX CORPORATION 7 INDUSTRIAL WAY SALEM, NH 03079 C.Dobens 1/5/98 SIZE B SCALE FSCM 18377 2:1 PS-563 SHEET 1 OF REV C 1