UNCONTROLLED DOCUMENT 315 [0,203] 160 [0,063] 0.98 [0,039] 2.00 [0.079] 3.20 [0,126] 1.09 [0.043] 157 [0.062] 2.69 [0.106] 6.34 [0.2501 CATHODE >/ MARK W 294 [0,100] 0.25 (0.010) B 1.01 [0,040] 025 [0.010] I 0.51 [0,020] OSL [0.0201] Wet "UNLESS GTHERVBE SPECIFIED TOLERANCES PER DECIMAL PRECISKIN ARE: X=t1 (40.028), XX=10.5 (40.020), XxX=10.28 (04010), XXXX=0.127 (40.005). LEAD SZE=+105 (0.0072), LEAD LENGTH=-40-75 (+1030). NIN= + EEMAL PART NUMBER REV. OEDHPI12101455442 ELECTRO-OPTICAL CHARACTERISTICS Ty=20'C PARAMETER SYMBOL TEST CONDITION MIN TYP MAX UNT OPEN CIRCUIT VOLTAGE Voc Ee=0.5mw/em 0.38 V SHORT CIRCUIT CURRENT Isc Eo=0.5mw/ent 18 A BARK CURRENT Id VWe=10V 5 W rv Ee=0.5mw/ent TERMINAL CAPACITANCE = Ct Vr=OV, F=1MHz 9 pF RESPONSE TIME Tr/TF = Vr=10V,Rl=1000 2 18/18 ns SPECTRAL SENSIIMITY A 400~1100 nm PEAK WAVELNGTH ip 900 nm HALF ANGLE r +80 DEG LENS COLOR: CLEAR LIMITS GF SAFE OPERATION AT 25C PARAMETER MAX UNITS REVERSE VOLTAGE Ri) Vv POWER DISSIPATION 100 mW OPERATING TEMP. -25 10 +80 C STORAGE TEMP. -25 TO +80 c SOLDERING TEMP. + 260 c 2.0mm FROM BODY 5 SEC. MAX NOTES: 1. SOLDER PADS TINNED. 2, FEED THRU. (2 PLS.) 3. QED-HPI121DC160 4, LXP-PCB13554-2, UNCONTROLLE 1 K LOCC OMEN T we PRECSIDN REV. OED-HPI121013534-2 CONFIDENTIAL _INFORNATION PART NUMBER THE INFORMATION CONTAINED IN THE DOCUMENT 1S THE PROPERTY OF LUMEX ING. EXCEPT AS SPECERALLY AUTHORIZED IN WRITING F BY LUNEX ING, THE HOLDER OF THS DOGUMENT SHALL KEEP ALL INFORMATION (N PART FROM DGCLOSURE AND DSSENNATION Ti ALL THIRD PARTIES. 6mm x Smm CUSTOM PHOTODIODE ASSEMBLY. BELIASLITY NOTE OUR MANY YEARS OF EXPERIENCE DATA ACCUNLLATION INDICATE THAT SOLDER HEAT IS A MOR CAUSE OF EARLY AND FUTURE FAILURE. PLEASE PAY ATTENTION TQ YOUR SGLOERING PROCESS, La it CONTANED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR 290 E. HELEN ROAD PALATINE, IL 600676976 PHONE; +1,.847,.359.2790 US WEB: www.lumex.com Hs, |TW WEB: www.lumex.com.tw DRAWN BY: GB CHECKED BY: APPROVED BY:|DATE: 1 PAGE: SCALE: 0.11.02 1 OF 1 N/A