PRELIMINARY DATA SHEET NEC's NPN SiGe TRANSISTOR NESG2046M33 FOR LOW NOISE, HIGH -GAIN AMPLIFICATION FEATURES * IDEAL FOR LOW NOISE, HIGH-GAIN AMPLIFICATION APPLICATIONS: NF = 0.8 dB TYP., Ga = 11.5 dB TYP. @ VCE = 1 V, IC = 3 mA, f = 2 GHz * HIGH BREAKDOWN VOLTAGE TECHNOLOGY FOR SIGE TRANSISTORS : VCEO (absolute maximum ratings) = 5.0 V * 3-PIN SUPER LEAD-LESS MINIMOLD (M33) PACKAGE ORDERING INFORMATION PART NUMBER QUANTITY SUPPLYING FORM NESG2046M33-A 50 pcs (Non reel) * 8 mm wide embossed taping NESG2046M33-T3-A 10 kpcs/reel * Pin 2 (Base) face the perforation side of the tape Remark To order evaluation samples, contact your nearby sales office. The unit sample quantity is 50 pcs. ABSOLUTE MAXIMUM RATINGS (TA =+25C) SYMBOL RATINGS UNIT Collector to Base Voltage PARAMETER VCBO 13 V Collector to Emitter Voltage VCEO 5 V Emitter to Base Voltage VEBO 1.5 V IC 40 mA Collector Current Total Power Dissipation 130 mW Junction Temperature Ptot Tj 150 C Storage Temperature Tstg -65 to +150 C Note Note Mounted on 1.08 cm2 x 1.0 mm (t) glass epoxy PCB Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. California Eastern Laboratories NESG2046M33 ELECTRICAL CHARACTERISTICS (TA =+25C) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT DC Characteristics Collector Cut-off Current ICBO VCB = 5 V, IE = 0 mA - - 100 nA Emitter Cut-off Current IEBO VEB = 0.5 V, IC = 0 mA - - 100 nA VCE = 1 V, IC = 2 mA 140 180 220 - VCE = 1 V, IC = 15 mA, f = 2 GHz 15 18 - GHz |S21e| VCE = 1 V, IC = 15 mA, f = 2 GHz 11 13 - dB Noise Figure NF VCE = 1 V, IC = 3 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt - 0.8 1.5 dB Associated Gain Ga VCE = 1 V, IC = 3 mA, f = 2 GHz, ZS = ZSopt, ZL = ZLopt 9.5 11.5 - dB Cre Note 2 VCB = 1 V, IE = 0 mA, f = 1 MHz - 0.2 0.4 pF DC Current Gain hFE Note 1 RF Characteristics Gain Bandwidth Product fT Insertion Power Gain 2 Reverse Transfer Capacitance Notes 1. Pulse measurement: PW 350 s, Duty Cycle 2% 2. Collector to base capacitance when the emitter grounded hFE CLASSIFICATION RANK FB Marking T7 hFE Value 140 to 220 NESG2046M33 PACKAGE DIMENSIONS 3-PIN SUPER LEAD-LESS MINIMOLD (M33) (UNIT: mm) 0.640.05 (Bottom View) 0.15 0.125 0.15 0.285 1 3 0.125 0.57 2 T7 0.840.05 0.440.05 0.11 0.4 MAX. 0.15 PIN CONNECTIONS 1. Emitter 2. Base 3. Collector Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 09/09/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.