Data Sheet SML-P1 Series PICOLEDTM-eco/PICOLEDTM 10060402 1.0x0.6mmt=0.2mm Features Ultra compact, thin size 1.0x0.6mm Thinnest size in the world t=0.2mm Original device technology enables high brightness and high reliability Accomplishes low power consuming application Specification assured at IF=1mA (PICOLEDTM-eco) Color Type V U D Y M P B WB HB Investigated Aug. 2009 Specifications PICOLEDTM-eco Absolute Maximum Ratings (Ta25) Electrical and Optical Characteristics (Ta25) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength D Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Typ. Min.*2 Typ. Max.*2 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr() Tstg() (V) IF(mA) (A) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Part No. SML-P11VT Red SML-P11UT AIGaInP Orange on GaAs SML-P11DT SML-P11YT Yellow SML-P11MT Yellowish Green 621 626 631 1 3.6 616 621 626 1.6 5.5 1.8 50 20 100*1 5 -40 to +85 -40 to +100 1 10 4 602 605 608 583 586 589 566 569 1 1 7.3 52 2.5 1.9 54 7.6 572 0.63 2.1 1:Duty1/10, 1kHz 2:Reference PICOLEDTM Absolute Maximum Ratings (Ta25) Chip Emitting Power Forward Peak Forward Reverse Operating Structure Color Dissipation Current Current Voltage Temp. PD(mW) IF(mA) IFP(mA) VR(V) Topr() Part No. Electrical and Optical Characteristics (Ta25) Forward Voltage VF Reverse Current IR Dominant Wavelength D Luminous Intensity IV Typ. IF(mA) Max. VR(V) Min.*2 Typ. Max.*2 IF(mA) Min. Typ. IF(mA) (V) (A) (mcd) (mcd) (nm) (nm) (nm) Storage Temp. Tstg() SML-P12VT Red SML-P12UT SML-P12DT AIGaInP on GaAs SML-P12YT SML-P12PT 630 635 620 625 60 25 Orange 52 20 2.1 20 100*1 602 605 608 587 590 593 85 100 4 20 20 40 130 100 5 -40 to +85 -40 to +100 54 569 572 575 10 35 557 560 563 4.0 13 465 470 475 2.2 Green SMLP12BC7T 625 615 2.0 Yellow Yellowish Green SML-P12MT 50 Blue 5.6 17 36 71 14 22 66 SMLP12WBC7W InGaN 2.9 White SMLP12HBC7W Pink 5 5 74 10 5 (x, y) (0.30, 0.30) (x, y) (0.23, 0.10) 5 1:Duty1/10, 1kHz 2:Reference Dimensions Recommended Solder Pattern Viewing Angle SML-P11/-P12 Series 1 0.6 ANGULAR DISPLACEMENT (deg) SCANNING ANGLE (deg) Directivity (deg) X Y 30 20 10 0 10 20 0.6 Directivity (deg) X' 30 0.5 (0.08) +0.05 20 30 40 60 70 80 80 90 100 50 50 90 100 50 RELATIVE INTENSITY (%) 0 90 100 50 RELATIVEINTENSITY INTENSITY (%) RELATIVE (%) RELATIVE INTENSITY (%) 0.4 0.2 -0.02 10 70 80 80 0 0 60 70 70 50 10 50 60 60 90 100 20 30 40 50 50 0.6 Y' 40 40 0.5 SMLP12 Series 0.52 (deg) SCANNING ANGLE Directivity (deg) X' Y' 30 20 10 0 10 20 ANGULAR DISPLACEMENT (deg) Directivity (deg) 80 80 Tolerance : 0.05 unit : mm unit : mm 50 0 10 0 10 20 30 40 50 RELATIVEINTENSITY INTENSITY (%) (%) RELATIVE 50 60 60 70 70 90 100 20 50 60 60 0.4 30 40 50 50 Terminal Y 40 40 Cathode mark X 30 90 100 70 70 80 80 90 100 50 0 50 RELATIVEINTENSITY INTENSITY (%) RELATIVE (%) TM PICOLED is ROHM's pending trademark. www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 1/3 2011.05 - Rev.B 90 100 SML-P1 series Electrical Characteristics Curves Forward Current-Forward Voltage SML-P11VT SML-P11UT SML-P11DT SML-P11YT SML-P11MT 10.0 1.0 0.1 1.5 SML-P12VT SML-P12UT SML-P12DT SML-P12YT SML-P12MT SML-P12PT 10 1.0 1.5 2.5 2.0 Ta=25C 100 FORWARD VOLTAGEVF (V) SMLP12BC7T SMLP12WBC7W SMLP12HBC7W 10 1.0 2.5 2.5 2.0 Ta=25C 100 FORWARD CURRENTIF (mA) FORWARD CURRENTIF (mA) FORWARD CURRENTIF (mA) Ta=25C 100.0 FORWARD VOLTAGEVF (V) 3.0 3.5 FORWARD VOLTAGEVF (V) Luminous Intensity-Atmosphere Temperature 1.4 SML-P11VT SML-P11UT SML-P11DT SML-P11YT SML-P11MT 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 IF=20mA 1.6 1.4 1.2 SML-P12VT SML-P12UT SML-P12DT SML-P12YT SML-P12MT SML-P12PT 1.0 0.8 0.6 0.4 -40 100 ATMOSPHERE TEMPERATURETa (C) -20 0 20 40 60 80 IF=20mA 1.6 RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY IF=20mA 1.6 SMLP12BC7T SMLP12WBC7W SMLP12HBC7W 1.4 1.2 1.0 0.8 0.6 0.4 -40 100 ATMOSPHERE TEMPERATURETa (C) -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURETa (C) Luminous Intensity-Forward Current 1.0 SML-P11VT SML-P11UT SML-P11DT SML-P11YT SML-P11MT 0.8 0.6 0.4 0.2 0 0 5 10 15 Ta=25C 1.2 1.0 0.8 SML-P12VT SML-P12UT SML-P12DT SML-P12YT SML-P12MT SML-P12PT 0.6 0.4 0.2 0 20 0 FORWARD CURRENTIF (mA) 5 10 15 Ta=25C 3 RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY Ta=25C 1.2 SMLP12BC7T SMLP12WBC7W SMLP12HBC7W 2 1 0 20 0 FORWARD CURRENTIF (mA) 5 10 15 20 FORWARD CURRENTIF (mA) Derating 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURETa (C) www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 30 20 10 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURETa (C) 2/3 100 SML-P12VT SML-P12UT SML-P12DT SML-P12YT SML-P12MT SML-P12PT 30 MAXIMUM FORWARD CURRENT(mA) 20 SML-P11VT SML-P11UT SML-P11DT SML-P11YT SML-P11MT MAXIMUM FORWARD CURRENT (mA) MAXIMUM FORWARD CURRENT (mA) 30 SMLP12BC7T SMLP12WBC7W SMLP12HBC7W 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURETa (C) 2011.05 - Rev.B SML-P1 series Rank Reference of Brightness Red (V, U) Luminous G H J K L M Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 Mini-mold 1006 Chip LEDs N P Q 16 to 25 25 to 40 S T U Ta=25C, IF20mA W X V 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 SML-P11VT SML-P11UT 0.2 R SML-P12VT SML-P12UT Orange (D) Ta=25C, IF20mA Luminous G H J K L M N P Q R S T U V W X Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 Mini-mold Chip LEDs 1006 SML-P11DT 0.2 SML-P12DT Yellow (Y) Ta=25C, IF20mA Luminous G H J K L M N P Q R S T U V W X Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 Mini-mold Chip LEDs 1006 SML-P11YT 0.2 SML-P12YT Green (M, P) Luminous F G H J K L Intensity Package size(mm) Height(mm) (mcd) 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 Mini-mold Chip LEDs 1006 M N P Q 10 to 16 16 to 25 25 to 40 40 to 63 SML-P11MT 0.2 R S T U V Ta=25C, IF20mA W X 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1800 SML-P12MT SML-P12PT Blue (B) Ta=25C, IF5mA Luminous Package Intensity size (mcd) (mm) Height(mm) Mini-mold Chip LEDs 1006 G H J K L M N 0.9 to 1.4 1.4 to 2.2 2.2 to 3.6 3.6 to 5.6 5.6 to 9.0 9 to 14 0.2 P S T U V W SMLP12BC7T Ta=25C, IF5mA Luminous Package Intensity size (mcd) (mm) Height(mm) N P Q 14 to 25 25 to 36 36 to 56 0.2 R S T U V W 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 SMLP12WBC7W Pink (HB) Ta=25C, IF5mA Luminous Package Intensity size (mcd) (mm) Height(mm) Mini-mold Chip LEDs 1006 R 14 to 22 22 to 36 36 to 56 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 White (WB) Mini-mold Chip LEDs 1006 Q 0.2 N P Q 14 to 25 25 to 36 36 to 56 R S T U V W 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 SMLP12HBC7W :IF1mA Part No. Construction "-" will be taken out for emitting color W/B/E series. S M L Special Code will be applied for Emitting color W/B/E series. P 1 2 Series name Package name T M Chip Type Chromaticity rank(for white LED) Emitting Color T 8 6 Resin Color P Rank sign (Brightness Rank) Taping Specifications 1 Low Current Type V Red:630nm T Transparent Colorless T86 Cathode at sprocket hole side 2 High Brightness Type U Red:620nm W MilkyWhite D T87 Reverse of T86 Orange:605nm Y Yellow:587(590)nm M Yellowish-Green:572nm P Green:560nm B 1 For white LED, cathode at sprocket hole side Blue:470nm WB White HB Pink Concerning the Brightness rank * Please refer to the rank chart above for luminous intensity classification. * Part name is individual for each rank. * When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 3/3 2011.05 - Rev.B Notice Notes Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. R1120A