For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 162
HMC549MS8G / 549MS8GE
General Description
Features
Functional Diagram
The HMC549MS8G(E) is a GaAs PHEMT MMIC
Low Noise Ampli er that are ideal pre-ampli -
ers for CATV Set Top Box, Home Gateway, and
Digital Television receiver operating between
40 and 960 MHz. This high dynamic range LNA has
been optimized to provide 3.5 dB noise gure and
+27 dBm output IP3 from a single supply of +5V @
120 mA. The outputs of this LNA are extremely well
balanced, and can be used to drive a differential input
tuner with very high input IP2 requirements. This dual
purpose LNA can also be used as an active splitter
driving two single-ended input tuners. This LNA is
housed in a RoHS compliant MSOP8G SMT package
with exposed ground paddle.
Single-ended or Balanced Output
High Output IP3: +27 dBm
Low Noise Figure: 3.5 dB
Single Positive Supply: +5V
75 Ohm Input
Electrical Speci cations, 75 Ohm System, TA = +25° C, Vdd = +5V
Typical Applications
The HMC549MS8G(E) is ideal for:
• DTV Receivers
• Multi-Tuner Set Top Boxes
• PVRs & Home Gateways
Parameter* Min. Typ. Max. Units
Frequency Range 0.04 - 0.96 GHz
Gain 25 dB
Gain Variation over Temperature 0.01 0.02 dB/°C
Noise Figure 3.5 5.2 dB
Input Return Loss 8dB
Output Return Loss 15 dB
Output Power for 1 dB Compression (P1dB) 12.5 dBm
Output Third Order Intercept (OIP3) 27 dBm
Output Second Order Intercept (OIP2) 52 dBm
Amplitude Balance 0.3 dB
Phase Balance 2deg
Supply Current (Idd) 120 mA
* Unless otherwise noted, all measurements performed with balun on the output.
DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
v02.0310
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 163
Broadband Gain & Return Loss Gain vs. Temperature
Input Return Loss vs. Temperature
Noise Figure vs. Temperature
Output Return Loss vs. Temperature
-20
-16
-12
-8
-4
0
4
8
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
0
2
4
6
8
10
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-35
-30
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
-10
-8
-6
-4
-2
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
0
2
4
6
8
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
- 40C
GAIN (dB)
FREQUENCY (GHz)
All measurements taken in 75 Ohm system.
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 164
Psat vs. Temperature
P1dB vs. Temperature
Output IP3 vs. Temperature
Gain, Noise Figure & P1dB vs.
Supply Voltage @ 500 MHz
Phase Balance *Amplitude Balance *
8
9
10
11
12
13
14
15
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
P1dB (dBm)
FREQUENCY (GHz)
0
2
4
6
8
10
5
7
9
11
13
15
3 3.5 4 4.5 5 5.5
GAIN
NOISE FIGURE
P1dB
GAIN & NOISE FIGURE (dB)
P1dB (dBm)
SUPPLY VOLTAGE
(
Vdc
)
-6
-4
-2
0
2
4
6
8
10
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
PHASE ERROR (deg)
FREQUENCY (GHz)
-0.5
-0.4
-0.3
-0.2
-0.1
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
AMPLITUDE ERROR (dB)
FREQUENCY (GHz)
20
22
24
26
28
30
32
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
IP3 (dBm)
FREQUENCY (GHz)
8
9
10
11
12
13
14
15
16
17
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25 C
+85 C
-40 C
Psat (dBm)
FREQUENCY (GHz)
* Data taken without balun on the output.
All measurements taken in 75 Ohm system.
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 165
Absolute Maximum Ratings
Drain Bias Voltage (Vdd) +7V
RF Input Power (RFIN)(Vdd = +3 Vdc) 0 dBm
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 20 mW/°C above 85 °C) 1.32 W
Thermal Resistance
(channel to ground paddle) 49 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Vdd (Vdc) Idd (mA)
3.0 117.1
3.3 117.5
3.6 117.9
4.5 118.5
5.0 119.0
5.5 119.3
Typical Supply Current vs. Vdd
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC549MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H549
XXXX
HMC549MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H549
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC. SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 166
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 8 Vdd1, Vdd2 Power supply voltage for the rst stage. An external choke
inductor is required. See application circuit.
2 FEED Feedback capacitor for the rst stage.
3RFIN
This pin is DC coupled and requires a DC blocking cap.
See application circuit.
4ACG1
This pin has to be terminated by an external capacitor.
See application circuit.
5RFOUT RF differential output 2. This port is DC coupled.
6 RFOUT RF differential output 1. This port is DC coupled.
7ACG2
This pin has to be terminated by an external capacitor.
See application circuit.
8Vdd2
Power supply voltage for second stage. An external choke
inductor is required. See application circuit.
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 167
Application Circuit for 109236 - HMC549MS8G(E) (2-port)
Application Circuit for 113184 - HMC549MS8G(E) (3-port)
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 168
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 75 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
Evaluation PCB
List of Materials for Evaluation PCB 109236 [1]
Item Description
J1, J2 BOMAR F Type 75 Ohm Connectors
J3, J4 DC Pin
C1, C2 18 kpF Capacitor, 0402 Pkg.
C3 150 pF Capacitor, 0402 Pkg.
C4 390 pF Capacitor, 0603 Pkg.
C5 4.7 μF Capacitor, Tantalum
C6 1,000 pF Capacitor, 0402 Pkg.
C7, C8 120 pF Capacitor, 0402 Pkg.
L1, L2 560 nH Inductor, 0603 Pkg..
R1, R2 0 Ohm Resistor, 0603 Pkg.
U1 HMC549MS8G(E) Low Noise Ampli er
U2 ETC1-1-13 l:l Balun
PCB [2] 109234 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: FR4
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 169
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 75 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
Evaluation PCB
List of Materials for Evaluation PCB 113184 [1]
Item Description
J1 - J3 BOMAR F Type 75 Ohm Connectors
J4, J5 DC Pin
C1, C2 18 kpF Capacitor, 0402 Pkg.
C3 150 pF Capacitor, 0402 Pkg.
C4 1,000 pF Capacitor, 0402 Pkg.
C5 390 pF Capacitor, 0603 Pkg.
C6 4.7 μF Capacitor, Tantalum
C7, C8 120 pF Capacitor, 0402 Pkg.
L1, L2 560 nH Inductor, 0603 Pkg..
U1 HMC549MS8G(E) Low Noise Ampli er
PCB [2] 113182 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: FR4
HMC549MS8G / 549MS8GE
v02.0310 DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
