US631-C00005-100PA - Measurement Specialties

The UltraStable 600 from

Schaevitz Sensors, a division

of Measurement Specialties,

incorporates an ultra-rugged IP

67 rated housing. All wetted parts

are constructed of 316L stainless

steel, providing media isolation and

no internal “O” rings.

The UltraStable 600 also offers a wide

selection of standard pressure ranges

and electrical outputs. The unit's high

stability rating is provided by IC Sensors'

solid state UltraStable technology, which

provides stability over a wide

temperature range. The modular design

is adaptable to an infinite number of port

variations, and standard outputs include

.5V to 4.5V ratiometric, 0V to 5V, 1V to

5V, 0V to 10V, regulated and 4 to 20mA

current loop.

The UltraStable's small size vs. high

performance enables the miniaturization

of high accuracy pressure and vacuum

systems. The unit's new low-pressure

ranges add sensitivity that has

previously been unavailable in

transducers of this size. The competitive

price, coupled with its high accuracy,

may make the UltraStable 600 the best

choice for your application.

Field replacement can easily be

performed without sacrificing accuracy

due to the very small total error band of

.75% max.

A Division of

Applications

✦ Refrigeration and HVAC controls

✦ Process control

✦ Marine systems

✦ Tank level

✦ Industrial machinery

✦ Calibration equipment

High Stability Stainless

Steel Pressure Transducer

✦0.75% TEB (Total Error Band) with .5% TEB

available as an option

✦ 0.1% Accuracy - typically

✦-50 to 125º C Operating Temperature

✦100% stainless steel isolation. Small size

✦Wide variety of pressure ranges and

electrical outputs

✦ Broad assortment of standard connectors

and ports

✦ UltraStable sensing technology

✦ CE versions available

✦ Custom verisons available

✦ Ranges starting from 15 psi FS

✦High field Interchangeability

Features

www.msiusa.com

UltraStable 600

04/02

0.75%

TEB

www.msiusa.com

A Division of

Schaevitz®Sensors

Division of Measurement Specialties

1000 Lucas Way

Hampton, VA 22666

1-800-745-8008

Phone: 757-766-1500

UltraStable 600

02/02

Units Amplified Ratiometric Amplified Amplified Notes

0.5 - 4.5 V out 0-5 V, 1-5 V, 0-10 V out 4 to 20 mA , two wire

Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.

Supply voltage V 4.75 5 5.25 8 30 10 30 1

Supply Current mA 2.5 3 3.5 2.5 3 3.5 20

Min load impedance 100 K ohm 100 K ohm

Max load impedance RL=50* (Vsupply-10)

Accuracy %FS -0.1 +0.1 -0.1 +0.1 -0.1 +0.1 3, 4

Offset %FS -0.5 +0.5 -0.5 +0.5 -0.5 +0.5 2

Span %FS -0.5 +0.5 -0.5 +0.5 -0.5 +0.5 2

Long Term

stability %FS/year 0.1 0.1 0.1

Response time ms 1.0 1.0 1.0

Isolation

Resistance M ohm 50 50 50 5

Static Performance Specifications

Notes:

1) Supply voltage must be 12 V for units with 10 V out.

2) Room temperature calibration.

3) Combined BFSL, hysteresis and repeatability (Per ISA S37.2) .25% for 1Kpsi and above

4) Over temp range -20 to +85º C

5) @ 50 V DC

Environmental Performance

Specification Min. Typ. Max. Notes

Total error band -20 to +85º C,

-7 to 185º F -0.75 %FS 0.50 %FS +0.75 %FS 1, 3, 4

Operating temperature range -50ºC 125ºC

-58ºF 257º F 2,3

Storage temperature range -50ºC 125ºC

-58ºF 257º F 2

Notes:

1) With reference to 25 º C, (77 º F)

2) Standard 105º C max. for cable version 3) Lower ranges available - consult factory

4) 0.5% max availability - consult factory

www.msiusa.com

A Division of

Schaevitz®Sensors

Division of Measurement Specialties

1000 Lucas Way

Hampton, VA 22666

1-800-745-8008

Phone: 757-766-1500

Specification Value Notes

Proof pressure 3x rated pressure

Burst pressure 4x rated pressure or 20k psi 2

Vibration 20 G’s rms @2kHz

Shock 100G 11ms

Pressure cycles 1 million cycles 0 to full scale

Media compatibility All materials compatible with 316 stainless steel 1

Environmental protection IP 67 (Cable version)

Ordering Information

1)Other materials available - consult factory 2) Which ever is less, 10X burst available on

some pressure ranges (consult factory)

Output Connection Specials Port Pressure Range Pressure Units

3=.5 to 4.5V ratio (1)

4= 1 to 5V

6= 0 to 5V

7= 0 to 10V

8=4-20 mA

X=Special output

1) For ratiometric output, span changes with input voltage

(see supply voltage specifications)

2= 1/4-19 BSP

4= 7/16-20 UNF

5=1/4-18 NPT

6= 1/8-27 NPT

X= special port

PSI Ranges

015P = 0 to 15 psi

030P = 0 to 30 psi

050P = 0 to 50psi

100P =0 to 100psi

300P = 0 to 300psi

500P - 0 to 500psi

01KP = 0 to 1Kpsi

03KP = 0 to 3Kpsi

05KP = 0 to 5Kpsi

Bar Ranges

001B = 0 to 1 Bar

002B = 0 to 2 Bar

005B = 0 to 5 Bar

007B = 0 to 7 Bar

010B = 0 to 10 Bar

020B = 0 to 20 Bar

035B = 0 to 35 Bar

070B = 0 to 70 Bar

200B = 0 to 200 Bar

350B = 0 to 350 Bar

A = absolute

G = gauge

Example:

US664-000005-100PG is an UltraStable 600 with 0 to 5V out, Packard

Connector, nothing special, 1/4 NPT pressure port and 100 psi gage.

US681-C00002- 005PG is an UltraStable 600 with 4-20 mA, 2-wire, output,

2 feet of cable, CE certified, 1/4 BSP male pressure port and 5 psi gage.

Electrical

US6 Output Connection Specials Port type Pressure range Pressure unit

US6 X X - XXXXX X - XXXX X

1=Cable 2 feet

4 = Integral Packard

5 = PTIH-10-6P

(Bendix style)

6 = GSSR 300 (9.4

mm) (Square

Hirshman)

8 = PTIH-08-4P

(Bendix Style)

x = Special

Connection

For Non-Standard

the standard num-

ber of “00000”

changes to a higher

value .i.e 1XXXX

Special numbers

starting with a “C”

are CE rated

Mechanical Specifications

UltraStable 600

02/02

www.msiusa.com

A Division of

Schaevitz®Sensors

Division of Measurement Specialties

1000 Lucas Way

Hampton, VA 22666

1-800-745-8008

Phone: 757-766-1500

UltraStable 600

02/02

6-pin 4-pin

ﬂ .875

Note: Mating connector is available with 3 ft of cable PN (2001140).

ﬂ .875 www.powerandsignal.com