To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. "Standard": 8. 9. 10. 11. 12. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET MOS FIELD EFFECT TRANSISTOR 2SJ462 P-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR HIGH SPEED SWITCHING DESCRIPTION Package Drawings (unit : mm) The 2SJ462 is a switching device which can be driven directly 5.7 0.1 2.0 0.2 by an IC operating at 3 V. The 2SJ462 features a low on-state resistance and can be 1.5 0.1 1 1.0 FEATURES * Can be driven by a 2.5 V power source. 0.55 tions such as power management. 2 3 0.5 0.1 * New-type compact package. 5.4 0.25 3.65 0.1 driven by a low voltage power source, so it is suitable for applica- 0.5 0.1 2.1 Has advantages of packages for small signals and for power 0.4 0.05 0.85 0.1 4.2 transistors, and compensates those disadvantages. * Low on-state resistance. RDS(ON) : 0.29 MAX. @VGS = -2.5 V, ID = -0.5 A Equivalent Circuit RDS(ON) : 0.19 MAX. @VGS = -4.0 V, ID = -1.0 A Electrode Connection 1. Source 2. Drain 3. Gate Drain ABSOLUTE MAXIMUM RATINGS (TA = +25 C) Drain to Source Voltage VDSS -12 V Gate to Source Voltage VGSS 8.0 V Drain Current (DC) ID(DC) 2.5 A Drain Current (pulse) ID(pulse) 5.0* A Total Power Dissipation PT 2.0** W Channel Temperature Tch 150 C Storage Temperature Tstg -55 to +150 C Internal Diode Gate Gate Protect Diode Source Marking : UA3 * PW 10 ms, Duty Cycle 1 % ** Mounted on ceramic board of 7.5 cm2 x 0.7 mm Document No. D11449EJ1V0DS00 (1st edition) Date Published April 1996 P Printed in Japan (c) 1996 2SJ462 ELECTRICAL SPECIFICATIONS (TA = +25 C) Parameter MIN. TYP. MAX. Unit Conditions Drain Cut-off Current IDSS -10 A VDS = -12 V, VGS = 0 Gate Leakage Current IGSS 10 A VGS = 8.0 V, VDS = 0 Gate Cut-off Voltage VGS(off) -0.7 -1.3 V VDS = -3.0 V, ID = -1.0 mA Forward Transfer Admittance |yfs| 1.5 S VDS = -3.0 V, ID = -1.0 A Drain to Source On-State Resistance RDS(on)1 195 290 m VGS = -2.5 V, ID = -0.5 A Drain to Source On-State Resistance RDS(on)2 135 190 m VGS = -4.0, ID = -1.0 A Input Capacitance Ciss 940 pF VDS = -3.0 V, VGS = 0 Output Capacitance Coss 835 pF f = 1.0 MHz Reverse Transfer Capacitance Crss 495 pF Turn-On Delay Time td(on) 45 ns VDD = -3.0 V, ID = -1.0 A Rise Time tr 225 ns VGS(on) = -3.0 V, RG = 10 Turn-Off Delay Time td(off) 140 ns Fall Time tf 195 ns Total Gate Charge QG 12 nC VDS = -8 V, ID = -2.5 A Gate to Source Charge QGS 2 nC VGS = -3.0 V, IG = -2 mA Gate to Drain Charge QGD 7 nC Diode Forward Voltage VF(S-D) -0.86 V Reverse Recovery Time trr 150 ns IF = -2.5 A, VGS = 0 nC di/dt = 50 A/s Reverse Recovery Charge 2 Symbol Qrr -1.0 160 RL = 3.0 IF = -2.5 A, VGS = 0 2SJ462 DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA FORWARD BIAS SAFE OPERATING AREA 100 -10 1 10 ID - Drain Current - A dT - Derating Factor - % 80 60 40 m s m s PW =1 00 -1 ms DC 20 Single Pulse 0 0 30 60 90 120 -0.1 -1 150 -10 DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE -5 -5 V TRANSFER CHARACTERISTICS -10 -4 V -3 -2 V -2 VDS = -3 V -1 -3 V ID - Drain Current - A ID - Drain Current - A -4 -100 VDS - Drain to Source Voltage - V TA - Ambient Temperature - C -1 TA = 125 C -0.1 TA = 75 C TA = 25 C -0.01 TA = -25 C -0.001 VGS = -1 V 0 0 -4 -6 -8 -10 -0.0001 0 VDS - Draint to Source Voltage - V -0.5 -1.0 -1.5 -2.0 VGS - Gate to Source Voltage - V FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT VDS = -3 V 1 TA = -25 C 25 C 75 C 125 C 0.1 0.01 -0.0001 -0.001 -0.01 ID - Drain Current - A -0.1 -1 RDS(on) - Drain to Source On-State Resistance - IyfsI - Forward Transfer Admittance - S 10 -2 -2.5 0.6 VGS = -2.5 V 0.5 0.4 TA = 125 C 0.3 75 C 25 C 0.2 -25 C 0.1 0 -0.001 -0.01 -0.1 -1 -10 ID - Drain Current - A 3 0.6 VGS = -4 V 0.5 0.4 0.3 TA = 125 C 75 C 0.2 25 C -25 C 0.1 0 -0.001 -0.01 -0.1 -1 -10 DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 0.3 ID = -2.5 A 0.2 -1.0 A -0.5 A 0.1 0 0 -2 ID - Drain Current - A CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE VGS = 0 f = 1 MHz 1 Ciss Coss Crss 0.1 -0.1 -1 VDD = -3 V VGS(on) = -3 V Rin = 10 td(off) td(on) 10 -0.1 -10 -1 -10 ID - Draint Current - A DYNAMIC INPUT/OUTPUT CHARACTERISTICS 8 12 -10 VDS - Drain to Source Voltage - V VDS = -8 V ID = -2.5 A ID - Reverse Drain Current - A -10 tr 100 SOURCE TO DRAIN DIODE FORWARD VOLTAGE -1 -0.1 -0.01 -0.6 -0.8 -1.0 -1.2 VSD - Source to Drain Voltage - V 4 -8 tf VDS - Drain to Source Voltage - V -0.001 -0.4 -6 SWITCHING CHARACTERISTICS 1000 td(on),tr,td(off),tf - Switching Time - ns Ciss,Coss,Crss - Capacitance - pF 10 -4 VGS - Gate to Source Voltage - V -1.4 VGS 4 8 VDS 2 4 0 0 0 8 16 24 QG - Gate Charge - nC 32 40 VGS - Gate to Source Voltage - V RDS(on) - Drain to Source On-State Resistance - DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT RDS(on) - Drain to Source On-State Resistance - 2SJ462 2SJ462 REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system TEI-1202 Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535E Guide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E 5 2SJ462 No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11