ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP "
Item Performance Characteristics
UWseries
Radial Lead Type, High Voltage, Smaller-Sized
High voltage type (2.7V).
One rank smaller case sized than UM series.
Wide temperature range (
–
25
to +
70
°C).
Compliant to the RoHS directive (2002/95/EC).
Drawing Type numbering system (Example : 2.7V 1F)
Category Temperature Range
Rated Voltage
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Stability at Low Temperature
Endurance
Shelf Life
Marking
– 25 to +70°C
2.7V
1 to 82F
See Note
±20% , 20°C
0.5C (mA) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage, 2.7V)
Printed with white color letter on black sleeve.
Capacitance (
– 25°C) /
Capacitance (+
20°C)
×100
70%
ESR, DCR* Refer to the list below (
20°C
). *DC internal resistance
The specifications listed at right shall be met when the capacitors
are restored to 20°Cafter the rated voltage is applied for 1000 hours
at 70°C.
The specifications listed at right shall be met when the capacitors
are restored to 20°C after storing the capacitors under no load
for 1000 hours at 70°C.
Specifications
J
1U
2W
3T
41
51
60
75
8M
9C
10 D
11
Configuration
Capacitance tolerance (±20%)
Rated capacitance (1 F)
Rated voltage (2.7V)
Series name
Type
φ D
8 10
Pb-free lead finishing
Pb-free PET sleeve
PD
6.3 CD
12.5 to 18 HD
Configuration
φD
P8
3.5
φd0.6
6.3
2.5
0.5
10
5.0 12.5
5.0
0.6
16
7.5
0.8
18
7.5
0.8
(φD < 10) 1.5
(φD 10) 2.0
L+ MAX. 15MIN 4MIN
φd
φD+0.5MAX
P±0.5
Pressure
relief vent
Sleeve (P.E.T.)
(mm)
In case L>25 for the φ10 and φ12.5 dia unit, lead dia φ d=0.8
0.6
Rated V oltage
( Code )
Rated
Capacitance
(F)
1.5 155
Code
8 × 11.5
1105 6.3 × 9
2.7 275 8 × 20
4.7 475
2.7V
(T1)
10 × 20
6.8 685 12.5 × 20
12 126 10 × 31.5
22 226 12.5 × 31.5
33 336 16 × 31.5
47 476
3
ESR
(Ω)
(at 1kHz)
4
2
1
0.8
0.4
0.3
0.2
0.2
2.5
DCR
Typical (Ω)
4
1.2
0.8
0.7
0.6
0.4
0.28
0.22 18 × 31.5
82 826 0.1 0.13 18 × 40
Case size
φ D × L (mm)
Dimensions
Capacitance change
ESR
Leakage current
Within ±30% of the initial capacitance value
300% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
ESR
Leakage current
Within ±30% of the initial capacitance value
300% or less than the initial specified value
Less than or equal to the initial specified value
Note :
The capacitance calculated from discharge time (∆T) with
constant current ( i ) after 30minuite charge with rated
voltage (2.7V).
The discharge current ( i ) is 0.01 × rated capacitance (F).
The discharge time (∆T) measured between 2V and 1V with
constant current.
The capacitance calculated bellow.
Capacitance (F) = i × ∆T
UW
UM
Smaller
• Please refer to page 20 about the end seal configulation.
The listed DCR value is typical and therefore not a guaranteed value.
CAT.8100A
