MLV Series Low Voltage Pressure Sensors
Parameter Min Typ Max Units Notes
Output Span
L01D @ 1 inH2O 6.0 7.0 8.0 mV 4
L02D @ 2 inH2O 9.0 10.0 11.0 mV 4
L05D @ 5 inH2O 14.0 15.0 16.0 mV 4
L10D @ 10 inH2O 19.0 20.0 21.0 mV 4
L20D @ 20 inH2O 19.0 20.0 21.0 mV 4
L30D @ 30 inH2O 19.0 20.0 21.0 mV 4
Span Temperature Shift (0°C to 50°C) - - ±250 uV 1
Oset Voltage @ Zero Di. Pressure - - ±500 uV -
Oset Temperature Shift (0°C to 50°C)
L01D, L02D, L05D - - ±250 uV 1
L10D, L20D, L30D - - ±200 uV 1
Oset Warm-up Shift - - ±50.0 uV 2
Oset Position Sensitivity (1g)
L01D - - ±20.0 uV 6
L02D - - ±15.0 uV 6
L05D, L10D, L20D, L30D - - ±10.0 uV 6
Oset Long Term Drift (One Year)
L01D, L02D, L05D - ±150 - uV -
L10D, L20D, L30D - ±100 - uV -
Linearity, Hysteresis Error - 0.10 0.30 %FSS 3
Response Time (10% to 90% Pressure Response) - 500 - us -
Front to Back Linearity - 0.75 - %FSS 5
Input Resistance - 12.0 - k ohm -
Output Resistance - 3.0 - k ohm -
Performance Characteristics for MLV Series (InH2O)
All pArAmeters Are meAsured At 5.0 volt excitAtion And room temperAture unless otherwise specified. pressure meAsurements Are with positive
pressure Applied to port B (the only port for the single port configurAtion pAckAges).
Pressure Sensor Maximum Ratings Environmental Specications
Supply Voltage (Vs) 12 Vdc
Common Mode Pressure
InH2O Devices (L01, L02, L05, L10, L20, L30) 10 psig
PSI Devices (005, 015, 030, 100, 150) 50 psig
Lead Temperature (soldering 2-4 sec.) 270 °C
Temperature Ranges
Compensated 0°C to 50°C
Operating -25°C to 85 °C
Storage -40°C to 125 °C
Humidity Limits 0 to 95% RH
(non condensing)