DATA SH EET
Product specification
Supersedes data of 2000 Jun 06 2000 Dec 04
DISCRETE SEMICONDUCTORS
BGA2022
MMIC mixer
b
ook, halfpage
MBD128
2000 Dec 04 2
Philips Semiconductors Product specification
MMIC mixer BGA2022
FEATURES
•Large frequency range:
– Cellular band (900 MHz)
– PCS band (1900 MHz)
– WLAN band (2.4 GHz)
•High isolation
•High linearity
•High conversion gain.
APPLICATIONS
Receiver side of wireless systems
that require high conversion gain and
high linearity at low supply current,
such as CDMA.
DESCRIPTION
Silicon double poly MMIC mixer in a
6-lead SOT363 plastic package.
PINNING
PIN DESCRIPTION
1 LO - GND
2 LO - signal
3V
S
4 IF - out
5 RF - feedback
6 RF - signal
handbook, 4 columns
IF-outRF-feedbackRF-signal
456
VS
LO-GND LO-signal
312
BIAS
CONTROL
MBL255
123
654
Top view
Fig.1 Simplified outline (SOT363) and symbol.
Marking code: A2p.
QUICK REFERENCE DATA
VS= 2.8 V; IS= 6 mA; PLO = 0 dBm; fRF = 1800 MHz; fLO = 2080 MHz; fIF = 280 MHz.
SYMBOL PARAMETER MIN. TYP. MAX. UNIT
Gconv conversion gain 468dB
NF noise figure (DSB) −12 −dB
IP3output third order intercept point −7−dBm
CAUTION
This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport
and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B.
2000 Dec 04 3
Philips Semiconductors Product specification
MMIC mixer BGA2022
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
Notes
1. LO and RF signals always AC coupled; 50 Ω source; no external DC voltage supplied to pins 1, 2 and 6.
2. Ts is the temperature at the soldering point of the ground tab.
THERMAL CHARACTERISTICS
CHARACTERISTICS
VS= 2.8 V; IS= 6 mA; Tj=25°C; unless otherwise specified.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VSsupply voltage −4V
I
Ssupply current −10 mA
PLO oscillator power note 1 −10 dBm
PRF RF power note 1 −10 dBm
Ptot total power dissipation Ts≤100 °C; note 2 −40 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature −150 °C
SYMBOL PARAMETER VALUE UNIT
Rth j-s thermal resistance from junction to solder point 375 K/W
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
ISsupply current VS=2.8V 468mA
G
conv(p) power conversion gain PRF =−25 dBm; PLO = 0 dBm
880 MHz −5−dB
1800MHz 468dB
1950 MHz −5−dB
2450 MHz −6−dB
NF noise figure DSB
880 MHz −9−dB
1800 MHz −12 −dB
1950 MHz −9−dB
2450 MHz −9−dB
IP3intercept point third order input output referred
880 MHz −4−dBm
1800 MHz −7−dBm
1950 MHz −7−dBm
2450 MHz −10 −dBm
VSWRLO return losses at LO port PLO = 0 dBm; f=0to3GHz −−2:1
2000 Dec 04 4
Philips Semiconductors Product specification
MMIC mixer BGA2022
APPLICATION INFORMATION
See application note number AN00059.
List of components (see Fig.2)
COMPONENT APPLICATION BOARD
880 MHz
(IF = 80 MHz) 1800 MHz
(IF = 280 MHz) 1950 MHz
(IF = 80 MHz) 2450 MHz
(IF = 280 MHz)
R1 1.2 kΩ2.7 kΩ2.2 kΩ3.3 kΩ
R2 22 Ω22 Ω22 Ω18 Ω
C1 12 pF 1.2 pF 1.5 pF 1.0 pF
C2 390 pF 5.6 pF 1.5 nF 82 pF
C3, C4 39 pF 6.8 pF 6.8 pF 2.7 pF
C5 27 pF 2 pF 15 pF 2.2 pF
C6 100 pF 100 pF 10 pF 100 pF
C7 22 nF 22 nF 22 nF 22 nF
C8 56 pF 8.2 pF 10 pF 6.8 pF
L1 10 nH 2.7 nH 2.7 nH 1.8 nH
L2 220 nH 110 nH 150 nH 220 nH
L3 470 nH 120 nH −120 nH
handbook, full pagewidth
MGT575
IF output
BGA2022
IF-outRF-feedbackRF-signal
C2 L1 C1 C5 L3 C6
R1 L2
C7
C8
R2
C3C4
456
VS
LO-GND LO-signal 312
LO input
RF input
Vsupply
BIAS
CONTROL
Fig.2 Application diagram.
2000 Dec 04 5
Philips Semiconductors Product specification
MMIC mixer BGA2022
handbook, halfpage
0 1000 2000 3000
400
300
100
0
200
−200
−150
−50
0
−100
MGT576
f (MHz)
RRF
(Ω)jX
(Ω)
jX
R
Fig.3 RF input impedance as a function of
frequency; typical values.
ZS=Z
L=50Ω; VS= 2.8 V; PRF = 25 dBm; Tamb =25°C.
handbook, halfpage
6000 200 400 500100 300
104
103
102
10
MGT577
f (MHz)
ZIF
(Ω)
−jX
R
Fig.4 IF output impedance as a function
frequency; typical values.
ZS=Z
L=50Ω; AC coupled; no signal; Tamb =25°C.
handbook, halfpage
−20 5
8
−4
0
4
6
−2
2
MGT578
−15 −10 −50
G
C
(dB)
PLO (dBm)
Fig.5 Conversion gain as a function of oscillator
power; typical values.
ZS=Z
L=50Ω; VS= 2.8 V; PRF = 0 dBm; f = 1800 MHz;
Tamb =25°C.
handbook, halfpage
05
10
0
2
MGT579
4
6
8
1234
I
S
(mA)
VS (V)
Fig.6 Supply current as a function of the supply
voltage; typical values.
ZS=Z
L=50Ω; AC coupled; no signal; Tamb =25°C.
2000 Dec 04 6
Philips Semiconductors Product specification
MMIC mixer BGA2022
PACKAGE OUTLINE
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC EIAJ
SOT363 SC-88
wBM
b
p
D
e
1
e
pin 1
index A
A1
Lp
Q
detail X
HE
E
vMA
AB
y
0 1 2 mm
scale
c
X
132
4
56
Plastic surface mounted package; 6 leads SOT363
UNIT A1
max bpcDEe
1H
E
L
p
Qywv
mm 0.1 0.30
0.20 2.2
1.8
0.25
0.10 1.35
1.15 0.65
e
1.3 2.2
2.0 0.2 0.10.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15 0.25
0.15
A
1.1
0.8
97-02-28
2000 Dec 04 7
Philips Semiconductors Product specification
MMIC mixer BGA2022
DATA SHEET STATUS
Note
1. Please consult the most recently issued data sheet before initiating or completing a design.
DATA SHEET STATUS PRODUCT
STATUS DEFINITIONS (1)
Objective specification Development This data sheet contains the design target or goal specifications for
product development. Specification may change in any manner without
notice.
Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be
published at a later date. Philips Semiconductors reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification Production This data sheet contains final specifications. Philips Semiconductors
reserves the right to make changes at any time without notice in order to
improve design and supply the best possible product.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseoratany otherconditionsabove thosegivenin the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationorwarrantythat suchapplicationswillbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomersusing orsellingtheseproducts
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
theuseofany ofthese products,conveys nolicenceortitle
under any patent, copyright, or mask work right to these
products,and makes norepresentationsor warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
© Philips Electronics N.V. SCA
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Internet: http://www.semiconductors.philips.com
2000 70
Philips Semiconductors – a worldwide compan y
For all other countries apply to: Philips Semiconductors,
Marketing Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN,
The Netherlands, Fax. +31 40 27 24825
Argentina: see South America
Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140,
Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773
Belgium: see The Netherlands
Brazil: see South America
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 68 9211, Fax. +359 2 68 9102
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Colombia: see South America
Czech Republic: see Austria
Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V,
Tel. +45 33 29 3333, Fax. +45 33 29 3905
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615 800, Fax. +358 9 6158 0920
France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,
Tel. +33 1 4099 6161, Fax. +33 1 4099 6427
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 2353 60, Fax. +49 40 2353 6300
Hungary: see Austria
India: Philips INDIA Ltd, Band Box Building, 2nd floor,
254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,
Tel. +91 22 493 8541, Fax. +91 22 493 0966
Indonesia: PTPhilipsDevelopmentCorporation, SemiconductorsDivision,
Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,
Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI),
Tel. +39 039 203 6838, Fax +39 039 203 6800
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,
TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087
Middle East: see Italy
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Pakistan: see Singapore
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW,
Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: see Spain
Romania: see Italy
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,
Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 58088 Newville 2114,
Tel. +27 11 471 5401, Fax. +27 11 471 5398
South America: Al. Vicente Pinzon, 173, 6th floor,
04547-130 SÃO PAULO, SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 821 2382
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 93 301 6312, Fax. +34 93 301 4107
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2741 Fax. +41 1 488 3263
Taiwan: Philips Semiconductors, 5F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2451, Fax. +886 2 2134 2874
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
60/14 MOO 11, Bangna Trad Road KM. 3, Bagna, BANGKOK 10260,
Tel. +66 2 361 7910, Fax. +66 2 398 3447
Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye,
ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
Uruguay: see South America
Vietnam: see Singapore
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Tel. +381 11 3341 299, Fax.+381 11 3342 553
Printed in The Netherlands 613516/06/pp8 Date of release: 2000 Dec 04 Document order number: 9397 750 07287
