SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED BRAID
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: D-146-0229/ -0230/ -0231
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D981997 REPLACES:
D980569
DRAWN BY:
M. FORONDA DATE: 11/24/98 PROD. REV.
SEE TABLE DOC ISSUE:
2
SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue.
4. BRAID: Raychem tin plated copper braid CMA 1000.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the
dimensional criteria listed, having tin or silver plated copper shields.
2. Temperature range: -55°C to +150°C.
3. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70.
For best results, prepare the cable as shown:
* A trademark of Raychem Corpor ation.
Product Revision Product Dimensions Cable Dimensions
Product
Name L ±0.8
(0.031) øA
min øB
min K
min øD
max øE
min J ±0.5
(J ±0.02)
D-146-0229 C 15.00
(0.591) 2.80
(0.106) 3.20
(0.125) 150
(5.910) 2.80
(0.106) 0.90
(0.035) 7.00
(0.275)
D-146-0230 C 15.00
(0.591) 4.60
(0.181) 5.10
(0.200) 150
(5.910) 4.60
(0.181) 1.80
(0.070) 7.00
(0.275)
D-146-0231 C 15.00
(0.591) 7.10
(0.280) 7.60
(0.300) 150
(5.910) 7.10
(0.280) 3.60
(0.142) 7.00
(0.275)
