10/100 Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE802.3 standard including 350H OCL with 8mA DC Bias 1500Vrms isolation voltage per IEEE802.3 Enhanced performance on EMI suppression with metal shield Operating temperature 0C to +70C UL 1863 listed RoHS compliant versions are available GENERAL ELECTRICAL SPECIFICATION Insertion Loss (dB Max) Return Loss (dB Min) @ 25C CMRR (dB Min) Crosstalk (dB Min) 0.1-100MHz 1-30MHz 40MHz 50MHz 60-80MHz 32MHz 62MHz 100MHz 0.1-100MHz 1.0 16.0 14.0 13.0 12.0 42.0 37.0 33.0 35.0 Hipot (Vrms) 1500 PART NUMBER TABLE Part Number 1 Turn Ratio (Chip : Cable) ( 3%) Tx Rx RoHS Part Number Configuration 2 Tx Rx 3 LED Mechanical Schematic (Left / Right) Package MJ-11U2GYA5-H301 MJR11U2GYA5-H301 1CT:1 1CT:1CT TCA CT G/Y MJ11U-01A H301 MJ-11U2GYA5-H30G MJR11U2GYA5-H30G 1CT:1CT 1CT:1CT TC TC G/Y MJ11U-01A H30G MJ-11U2GYA5-H30H MJR11U2GYA5-H30H 1CT:1 1CT:1CT TCA TC G/Y MJ11U-01A H30H MJ-11U2GYA5-H30Y MJR11U2GYA5-H30Y 1CT:1CT 1CT:1CT TC TC G/Y MJ11U-01A H30Y MJ-11U2GYA5-H33D MJR11U2GYA5-H33D 1CT:1CT 1CT:1CT TC TC G/Y MJ11U-01A H33D MJR11U2GYA5-H701 1CT:1.41 1CT:1CT TCA CT G/Y MJ11U-01A H701 MJR11U2GYA5-K30Y 1CT:1CT 1CT:1CT TC TC G/Y MJ11U-01A K30Y 4 MJR11U2GYA5-K33D 1CT:1CT 1CT:1CT TC TC G/Y MJ11U-01A K33D 4 MJ-11U2GYA5-H701 MJ-11U2GYA5-K30Y MJ-11U2GYA5-K33D 6 6 MJ-11U2NNA0-H301 MJR11U2NNA0-H301 1CT:1 1CT:1CT TCA CT -- MJ11U-01B H301 MJ-11U2NNA0-H30G MJR11U2NNA0-H30G 1CT:1CT 1CT:1CT TC TC -- MJ11U-01B H30G MJ-11U2NNA0-H30H MJR11U2NNA0-H30H 1CT:1 1CT:1CT TCA TC -- MJ11U-01B H30H MJ-11U2NNA0-H30Y MJR11U2NNA0-H30Y 1CT:1CT 1CT:1CT TC TC -- MJ11U-01B H30Y MJ-11U2NNA0-H33D MJR11U2NNA0-H33D 1CT:1CT 1CT:1CT TC TC -- MJ11U-01B H33D MJ-11U2NNA0-H701 MJ-11U2NNA0-K30Y 4 4 4 4 4 4 MJR11U2NNA0-H701 1CT:1.41 1CT:1CT TCA CT -- MJ11U-01B H701 6 MJR11U2NNA0-K30Y 1CT:1CT 1CT:1CT TC TC -- MJ11U-01B K30Y 4 6 MJR11U2NNA0-K33D 1CT:1CT 1CT:1CT TC TC -- MJ11U-01B K33D 4 MJ-11U2NNA0-K33D Notes: 1. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited. 2. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer 3. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; "--" = None. For different LED color requirements, please contact E&E Magnetic Products Limited. 4. Schematic H30G, H30Y, H33D, K30Y, K33D are suitable for Auto MDI/MDIX applications. 5. Panel tabs are optional. 6. Operating temperature: -40C to +85C. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 1 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ004(06) Revised in 06/07 10/100 Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited MECHANICAL DIMENSIONS MJ11U-01A 0.450 11.43 0.350 0.100 8.89 2.54 0.050 0.050 1.27 1.27 0.100 Chip side C 2.54 0.035 0.89 0.062 2X DIA: 1.57 0.126 2X DIA: 3.20 0.042 4X DIA: 1.07 RU 7 5 3 1 8 6 4 2 8X DIA: R US (E&E P/N) (DATE) 11 12 Cable side NOTE 5 0.640 MAX. 16.26 LED (LEFT) 0.250 6.35 0.180 9 10 0.100 4.57 2.54 0.120 0.534 13.56 0.620 15.75 Recommended hole pattern viewed from component side 3.05 0.855 MAX. 21.72 LED (RIGHT) 0.555 MAX. 14.10 REFERENCE OR GAUGE PLANE J8 0.425 10.80 J1 0.125 3.18 MJ11U-01B 0.450 11.43 0.350 0.100 8.89 2.54 0.050 0.050 1.27 1.27 0.100 Chip side C 2.54 0.035 0.89 0.062 2X DIA: 1.57 0.126 2X DIA: 3.20 RU 7 5 3 1 8 6 4 2 8X DIA: R US (E&E P/N) (DATE) 0.250 6.35 0.120 3.05 Cable side NOTE 5 0.620 15.75 Recommended hole pattern viewed from component side 0.640 MAX. 16.26 0.855 MAX. 21.72 0.555 MAX. 14.10 REFERENCE OR GAUGE PLANE J8 J1 0.425 10.80 0.125 3.18 All dimensions are specified in inch with higher precedence in inch. mm 0.010 . Unless otherwise specified, all tolerances are 0.25 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 2 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ004(06) Revised in 06/07 10/100 Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited SCHEMATICS H301 Shield Primary Secondary 1CT:1 J1 1 J2 2 3 J3 Tx-Side J4 4 J5 5 1CT:1CT 6 J6 J7 7 J8 8 RJ-45 Chip Side RJ-45 Cable Side Rx-Side 75 75 75 75 1000pF/2000V H30G Shield 1000pF/2000V 75 75 75 75 1CT:1CT Primary Secondary J1 J2 J3 J4 J5 J6 J7 J8 1 2 Tx-Side 3 4 1CT:1CT 5 6 7 8 Rx-Side RJ-45 Cable Side RJ-45 Chip Side H30H Shield 1000pF/2000V 75 Primary 1CT:1 2 Tx-Side 4 5 1CT:1CT 6 7 8 75 75 Secondary 1 3 75 Rx-Side RJ-45 Chip Side 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 3 J1 J2 J3 J4 J5 J6 J7 J8 RJ-45 Cable Side Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ004(06) Revised in 06/07 10/100 Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited SCHEMATICS H30Y / K30Y Shield Primary Secondary 1CT:1CT 1 J1 J2 J3 J4 J5 J6 J7 J8 2 3 4 Tx-Side 6 1CT:1CT 5 7 8 RJ-45 Chip Side RJ-45 Cable Side Rx-Side 75 75 75 75 1000pF/2000V H33D / K33D Shield Secondary Primary 1CT:1CT 1 J1 J2 J3 J4 J5 J6 J7 J8 2 3 4 Tx-Side 6 1CT:1CT 5 7 8 RJ-45 Chip Side RJ-45 Cable Side Rx-Side 75 75 75 75 1000pF/2000V H701 Shield Primary Secondary 1CT:1.41 J1 1 J2 2 3 4 J3 Tx-Side J4 J5 5 1CT:1CT 6 J6 J7 7 J8 8 RJ-45 Chip Side Rx-Side 75 75 75 75 RJ-45 Cable Side 1000pF/2000V 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 4 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ004(06) Revised in 06/07 10/100 Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited LEDS COLOR AND POLARITY MJ11U-01A LED (LEFT) POLARITY COLOR LED (RIGHT) 9 10 11 12 LED (RIGHT) PIN 11 COLOR PIN 12 GREEN LED (LEFT) POLARITY PIN 9 PIN 10 YELLOW LED SPECIFICATION @25C, FORWARD CURRENT = 20mA Standard Color Typical Wavelength (nm) Forward Voltage (volt) Typical Maximum Green 565 2.2 2.5 Yellow 590 2.1 2.5 MATERIALS Housing Contact Pins Consist of thermoset & thermoplastic materials, all of them are UL 94-V0 rated. 7 PCB Pins Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-202, method 208. Notes: 7. All parts shown in this datasheet have gold plating thickness of 10 micro-inch (min.) over contact area. Advance options including 30 micro-inch (min.) and 50 micro-inch (min.) are also available. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER 2/F Block A, Merit Industrial Centre, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304 Email: eempl@eleceltek.com Website: http://www.eleceltek.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 5 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ004(06) Revised in 06/07