MSP300 Pressure Transducer
MSP300 www.meas-spec.com August 2015
1/4
OEM and End User
One Piece Pressure Port Construction
No O-Rings
No Silicon Oil
No Welds
DESCRIPTION
The MSP300 pressure transducer from the Microfused line of MEAS sets a new price performance standard
for low cost, high volume, commercial and industrial applications. This series is suitable for measurement of liquid or
gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.
The transducer pressure cavity is machined from a solid piece of 17-4 PH or 316L stainless steel. The
standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. There are no O-rings,
welds or organics exposed to the pressure media. The durability is excellent.
MEAS’ proprietary Microfused technology, derived from demanding aerospace applications, employs
micromachined silicon piezoresistive strain gages fused with high temperature glass to a stainless steel diaphragm.
This approach achieves media compatibility simply and elegantly while providing an exceptionally stable sensor
without the PN junctions of conventional micromachined sensors.
This product is geared towards OEM customers in small to high volumes. Standard configurations are
suitable for many applications. Please contact factory for your customization needs.
FEATURES APPLICATIONS
One Piece Stainless Steel Construction
Pumps and Compressors
Ranges up to 10kpsi or 700Bar
Hydraulic/Pneumatic Systems
mV or Amplified Outputs
Automotive Test Systems
Excellent Accuracy
Energy and Water Management
Wide Operating Temperature Range
Agriculture – Sprayers and Dusters
Refrigeration – Freon and Ammonia Based
General Pressure Measurements
STANDARD RANGES (ALL INTERMEDIATE RANGES ARE STANDARD)
Range (psi)
Range (Bar)
Gage/Compound
Range (Bar DIN)
Gage/Compound
0 to 100
0 to 007
0 to 010
0 to 200
0 to 010
0 to 016
0 to 300
0 to 020
0 to 025
0 to 500
0 to 035
0 to 040
0 to 01k
0 to 070
0 to 060
0 to 03k
0 to 200
0 to 100
0 to 05k
0 to 350
0 to 160
0 to 10k
0 to 700
0 to 250
0 to 400
0 to 600
0 to 01k
MSP300 Pressure Transducer
MSP300 www.meas-spec.com August 2015
2/4
PERFORMANCE SPECIFICATIONS
Supply Voltage: 5.0V, Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Accuracy (RSS combined Non Linearity, Hysteresis &
Repeatability)
-1
1
% F.S.
BFSL @ 25°C
Pressure Cycles
1.00E+6
0~F.S. Cycles
Proof Pressure
2X
F.S. Rated
Burst Pressure
5X
F.S. Rated
Isolation, Body to Any Lead
50
MΩ
@ 250Vdc
Long Term Stability (1 year)
-0.25
0.25
%F.S.
Zero Thermal Error
-2.0
2.0
%F.S.
Over comp temp
Span Thermal Error
-2.0
2.0
%F.S.
Over comp temp
Zero Offset (mV Output)
-3.0
3.0
%F.S.
@ 25°C
Zero Offset (V Output)
-2.0
2.0
%F.S.
@ 25°C
Span Tolerance
-2.0
2.0
%F.S.
@ 25°C
Compensated Temperature
0
55
°C
Operating Temperature
-20
+85
°C
Storage Temperature
-40
+85
°C
Load Resistance (RL, mV Output)
1
MΩ
Load Resistance (RL, V Output)
5
KΩ
Response Time
1
ms
Bandwidth
DC to 1KHz (typical)
Shock
50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
Vibration
±20g, MIL-STD-810C, Procedure 514.2-2, Curve L
Wetted Material (except elastomer seal)
17-4PH or 316L Stainless Steel
For custom configurations, consult factory.
MSP300 Pressure Transducer
MSP300 www.meas-spec.com August 2015
3/4
DIMENSIONS
OUTPUT OPTIONS
Code
Output
Supply
Ratiometricity
Red
Black
Green
White
1
0 – 10mV/V
5V
Yes
+Supply
-Supply
+Output
-Output
2
0 – 20mV/V
5V
Yes
+Supply
-Supply
+Output
-Output
3
0.5 – 4.5V
5 ± 0.25V
Yes
+Supply
Common
Cut Off
+Output
4
1 – 5V
8 – 30V
No
+Supply
Common
Cut Off
+Output
5
4 – 20mA
9 – 30V
No
+Supply
-Supply
Cut Off
Cut Off
CODE
PORT
DIM C
2
1/4-19 BSPP
0.453
[11.50]
4
7/16-20UNF MALE SAE J1926-
2 STRAIGHT THREAD O-
RING BUNA-N 90SH-904
0.435
[11.05]
5
1/4-18 NPT
0.596
[15.14]
6
1/8-27 NPT
0.475
[12.06]
E
1/4-19 BSPT
0.50
[12.70]
F
1/4-19 BSPP FEMALE
0.70
[17.78]
K
1/8-27 NPT FEMALE
0.70
[17.78]
P
7/16-20UNF FEMALE SAE
J513 STRAIGHT THREAD
WITH INTEGRAL VALVE
DEPRESSOR
0.689
[17.50]
Q
M10 x 1.0 mm
0.42
[10.67]
S
M12 x 1.5 mm
0.53
[13.46]
U
G/14 DIN 3852 FORM E
GASKET DIN3869-14 NBR
0.547
[13.90]
W
M20 x 1.5 mm
0.702
[17.83]
CODE
CONNECTION TYPE
1
CABLE 2 FT
2
CABLE 4 FT
3
CABLE 10 FT
M
CABLE 1 M
N
CABLE 2 M
P
CABLE 5 M
R
CABLE 10 M
MSP300 Pressure Transducer
MSP300 www.meas-spec.com August 2015
4/4
ORDERING INFORMATION
M30
2
1
-
0
0000
5
-
100P
G
Model
Output
Connection Type
-
Port
Material
0000
Pressure
Port
-
Pressure
Range
Pressure
Type
M30
1 = 0 – 10mV/V
2 = 0 – 20mV/V
3 = 0.5 – 4.5V
4 = 1 – 5V
5 = 4 – 20mA
1 = Cable 2 ft
2 = Cable 4 ft
3 = Cable 10 ft
M = Cable 1 m
N = Cable 2 m
P = Cable 5 m
R = Cable 10 m
-
0 = 17-4PH
W = 316L
0000
2 = 1/4-19 BSPP
4 = 7/16-20UNF Male SAE
J1926-2 Straight Thread O-
Ring BUNA-N 90SH-904
5 = 1/4-18 NPT
6 = 1/8-27 NPT
E = 1/4-19 BSPT
F = 1/4-19 BSPP Female
K = 1/8-27 NPT Female
P = 7/16-20UNF Female
SAE J513 Straight Thread
with Integral Valve
Depressor
Q = M10 x 1.0 mm
S = M12 x 1.5 mm
U = G1/4 DIN 3852 Form E
Gasket DIN3869-14 NBR
W = M20 x 1.5 mm
-
100P
200P
300P
500P
01KP
03KP
05KP
10KP
007B
010B
020B
035B
070B
200B
350B
700B
DIN
010B
016B
025B
040B
060B
100B
160B
250B
400B
600B
01KB
G = Gage
C = Compound
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: pfg.cs.asia@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
