LCW W5SG
Golden DRAGON®
warm white
Lead (Pb) Free Product - RoHS Compliant
Abgekündigt nach OS-PD-2008-008
Obsolete acc. to OS-PD-2008-008
2008-07-07 1
Besondere Merkmale
Gehäusetyp: weißes SMD Gehäuse, farbiger
diffuser Silikon - Verguss
Typischer Lichtfluss: 32 lm bei 500 mA
Besonderheit des Bauteils: hocheffiziente
Lichtquelle bei geringem Platzbedarf
Farbort: x = 0,42, y = 0,40 nach
CIE 1931 (warm weiß)
typische Farbtemperatur: 3250 K
Abstrahlwinkel: Lambertscher Strahler (120°)
Technologie: InGaN
optischer Wirkungsgrad: 18 lm/W
Gruppierungsparameter: Lichtstrom, Farbort
Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
Lötmethode: IR Reflow Löten
Vorbehandlung: nach JEDEC Level 4
Gurtung: 24-mm Gurt mit 800/Rolle, ø180 mm
ESD-Festigkeit: ESD-sicher bis 2 kV nach
JESD22-A114-D
Anwendungen
Raumbeleuchtung: Deckenbeleuchtung, Ni-
schenbeleuchtung, Kronleuchter, Hängeleu ch-
ten, Wandleuchter
•Flutlicht
Effekt- und Akzentbeleuchtung: Vitrinen, Möbel-
beleuchtung, Markierungsbeleuchtung
Spezialbeleuchtung: Blitzlicht, Radbeleuchtung,
Sicherheitsbeleuchtung
Gebäudebeleuchtung: Fassadenbeleuchtung,
Treppenbeleuchtung
Auto: Innenbeleuchtung, Beleuchtung für
Make-up-Spiegel
Leselampen (z.B. Bus, Flugzeug)
Features
package: white SMD package, colored diffused
silicone resin
typical Luminous Flux: 32 lm at 500 mA
feature of the device: high efficient lightsource
at low space
color coordinates: x = 0.42, y = 0.40 acc. to
CIE 1931 (warm white)
typ. color temperature: 3250 K
viewing angle: Lambertian Emitter (120°)
technology: InGaN
optical efficiency: 18 lm/W
grouping p aramete r: luminous flux,
color coordinates
assembly methods: suitable for all
SMT assembly methods
soldering methods: IR reflow soldering
preconditioning: acc. to JEDEC Level 4
taping: 24 mm tape with 800/reel, ø180 mm
ESD-withstand voltage: up to 2 kV acc. to
JESD22-A114-D
Applications
room lighting: ceiling light, cove lighting,
chandeliers, pendants, sconces
flood light
effect and accent lighting: display cases,
furniture illumination, marker lights
specialty lighting: flashlight, bicycle headlamps,
security lights
architectural lighting: facade lighting, stairway
lighting
automotive interior lighting: dome lighting,
make-up mirror illumination
reading lamps (e.g. bus, airplane)
2008-07-07 2
LCW W5SG
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen
Helligkeitsgruppen (siehe Seite 6 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt
geliefert. Z.B.: LCW W5SG-FZHX-4F6G bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen FZ, GX, GY, GZ
oder HX enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine
Farbortgruppe geliefert. Z.B.: LCW W5SG-FZHX-4F6G bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -4F,
-4G, -5F, -5G, -6F oder -6G enthalten ist (siehe Seite 5 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for
explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g.
LCW W5SG-FZHX-4F6G means that only one group FZ, GX, GY, GZ or HX will be shippable for any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity
coordinate groups will be shipped on any one reel. E.g. LCW W5SG-FZHX-4F6G means that only 1 chromaticity
coordinate group -4F, -4G, -5F, -5G, -6F or -6G will be shippable on each reel (see page 5 for explanation).
In order to ensure availability, single chromaticity coordinate groups will not be orderable.
Bestellinformation
Ordering Information
Typ
Type
Emissions-
farbe
Color of
Emission
Lichtstrom
1) Seite 17
Luminous
Flux1) page 17
IF = 350 mA
ΦV (mlm)
Lichtstärke2) Seite 17
Luminous
Intensity2) page 17
IF = 350 mA
IV (mcd)
Bestellnummer
Ordering Code
!LCW W5SG-FZHX-4F6G white 15000 ... 33000 8000 (typ.) Q65110A3585
!Abgekündigt nach OS-PD-2008-008 - wird durch LCW W5SM ersetzt werden
Obsolete acc. to OS-PD-2008-008 - will be replaced by LCW W5SM
Letzte Bestellung / Last Order: 2009-01-10
Letzte Lieferung / Last Delivery: 2009-07-10
Vergleichstabelle
Correlation Table
Typ
Type Lichtstrom1) Seite 17
Luminous Flux1) page 17
IF = 350 mA
ΦV (mlm)
Typischer Lichtstrom2) Seite 17
Typical Luminous Flux2) page 17
IF = 500 mA
ΦV (mlm)
LCW W5SG-FZHX-4F6G 15000 ... 33000 31700
LCW W5SG
2008-07-07 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
Betriebstemperatur
Operating temperature range Top – 40 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 40 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj125 °C
Durchlassstrom (min.)
Forward current (max.)
(TA=25°C)
IF
IF
100
500 mA
mA
Stoßstrom
Surge current
t 10 μs, D = 0.005, TA=25°C
IFM 1500 mA
Sperrspannung
Reverse voltage
(TA=25°C)
VRnot designed for
reverse operation V
Leistungsaufnahme
Power consumption
(TA=25°C)
Ptot 2.3 W
Wärmewiderstand4) Seite 17
Thermal resistance4) page 17
Sperrschicht/Lötpad
Junction/solder point
Rth JS
9
K/W
2008-07-07 4
LCW W5SG
Kennwerte
Characteristics
(TA = 25 °C)
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
Farbkoordinate x nach CIE 19315) Seite 17 (typ.)
Chromaticity coordinate x acc. to CIE 19315) page 17
IF = 350 mA
x0.42
Farbkoordinate y nach CIE 19315) Seite 17 (typ.)
Chromaticity coordinate y acc. to CIE 19315) page 17
IF = 350 mA
y0.40
Abstrahlwinkel bei 50 % ΙV (Vollwinkel) (typ.)
Viewing angle at 50 % ΙV
2ϕ120 Grad
deg.
Durchlassspannung 6 Seite 17)(min.)
Forward voltage6) page 17 (typ.)
IF = 350 mA (max.)
VF
VF
VF
3.1
3.8
4.1
V
V
V
Sperrstrom
Reverse current (max.)
IR
not designed for
reverse operation
μA
Temperaturkoeffizient von x (typ.)
Temperature coefficient of x
IF = 350 mA; –40°C T 85°C
TCxsee page 9 10-3/K
Temperaturkoeffizient von y (typ.)
Temperature coefficient of y
IF = 350 mA; –40°C T 85°C
TCysee page 9 10-3/K
Temperaturkoeffizient von VF(typ.)
Temperature coefficient of VF
IF = 350 mA; –40°C T 85°C
TCV–4.0 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 350 mA
ηopt 18 lm/W
LCW W5SG
2008-07-07 5
Farbortgruppen5) Seite 18
Chromaticity Coordinate Groups5) page 18
Gruppe
Group Cx Cy Gruppe
Group Cx Cy
4F 0.394 0.356 5G 0.399 0.382
0.412 0.379 0.418 0.407
0.425 0.376 0.432 0.404
0.409 0.356 0.412 0.379
4G 0.379 0.356 6F 0.432 0.404
0.399 0.382 0.453 0.432
0.412 0.379 0.457 0.418
0.394 0.356 0.445 0.402
5F 0.412 0.379 6G 0.418 0407
0.432 0.404 0.434 0.427
0.445 0.402 0.453 0.432
0.425 0.376 0.431 0.404
520 530 540 550
560
570
580590600
610
620
630
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
510
500
490
480
470
450
460
Cx
Cy
6G 6F
5F
5G
4G 4F
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
Cx
OHA02588
Cy
0.34
+
E
2008-07-07 6
LCW W5SG
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group Lichtstrom1) Seite 17
Luminous Flux1) page 17
ΦV (mlm)
Lichtstärke2) Seite 17
Luminous Intensity2) page 17
IV (mcd)
FZ
GX
GY
GZ
HX
15000 ... 18000
18000 ... 21000
21000 ... 24000
24000 ... 28000
28000 ... 33000
5500 (typ.)
6500 (typ.)
7500 (typ.)
8500 (typ.)
10000 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus
5 Helligkeitsgruppen.
Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a family group of 5 individu al b right ness
groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: GY-5F
Example: GY-5F
Helligkeitsgruppe
Brightness Group Farbortgruppe
Chromaticity Coordinate Group
GY 5F
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten.
Note: No packing unit / tape ever contains more than one brightness group.
LCW W5SG
2008-07-07 7
Relative spektrale Emission2) Seite 17
Relative Spectral Emission2) page 17
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Φrel = f (λ); TA = 25 °C; IF = 350 mA
Abstrahlcharakteristik2) Seite 17
Radiation Characteristic2) page 17
Ιrel = f (ϕ); TA = 25 °C
OHL12447
400
0
20
40
60
80
100
nm
%
λ
450 500 550 600 650 700 750 800
V
λ
Φ
rel
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
10˚20˚40˚ 30˚
OHL01660
50˚
60˚
70˚
80˚
90˚
100˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LCW W5SG
2008-07-07 8
Durchlassstrom2) Seite 17
Forward Current2) page 17
IF = f (VF); TA = 25 °C
Relative Vorwärtsspannung2) Seite 17
Relative Forward Voltage2) page 17
ΔVF = VF - VF(25 °C) = f (Tj); IF = 350 mA
Relative Lichtstrom2) 7) Seite 17
Relative Luminous Flux2) 7) page 17
ΦV/ΦV(350 mA) = f (IF); TA = 25 °C
Relative Lichtstrom2) Seite 17
Relative Luminous Flux2) page 17
ΦV/ΦV(25 °C) = f (Tj); IF = 350 mA
OHL00830
10-2
A
I
F
V
F
2.0
100
V
10-1
2.5 3.0 3.5 4.0 4.5 5.0 6.0
OHL02671
T
j
-40
-0.1
-0.2
-0.3
0
0.1
-20 0 20 40
0.2
0.4
˚C60 100-60
V
V
F
Δ
OHL00831
10
-2
10
1
1
10 mA
3
10
F
I
Φ
V (350 mA)
Φ
V
10
2
10
-1
10
0
OHL12870
-60
0
T
˚C-40 -20 0 20 40 60 100
0.2
0.4
0.6
0.8
1.0
1.2
1.4
j
Φ
V (25 ˚C)
Φ
V
LCW W5SG
2008-07-07 9
Farbortverschiebung2) Seite 17
Chromaticity Coordinate Shift2) page 17
x, y = f (IF); TA = 25 °C
OHL02672
T
Cy
j
-40
-0.016 -20 0 20 40 ˚C60 100-60
-0.014
-0.012
-0.010
-0.008
-0.006
-0.004
-0.002
0
0.004 Cx
Cy
ΔCxΔ
LCW W5SG
2008-07-07 10
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
IF = f (TS)
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 25 °C
The emitter die exhibits excellent performance but
slight package discoloration occurs at highest
temperatures.The median lifetime depends on the
application
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 85 °C
OHL02093
0020 40 60 80 ˚C 100
mA
F
I
temp. solder point
T
S
S
T
100
200
300
400
500
600
10
P
0.2
1010
0-5 1010
-4 -3 10
-2 -1
0.5
1
I
FA
t
D
0.005
0.01
0.1
0.02
0.05
=
T
D
=
P
t
1010
t
0
p
1s2
T
I
F
OHL01399
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Exemplarische durchschnittliche2) Seite 17
Lebensdauer für mittlere Helligkeitsgruppe
Exemplary median Lifetime2) page 17
for median Brightness Group
Bedingungen
Conditions
mittlere
Lebensdauer
median
Lifetime
Einheit
Unit
IF = 250 mA
TS = 25°C 50.000 Betriebsstunden
operating hours
IF = 350 mA
TS = 85°C 10.000 Betriebsstunden
operating hours
IF = 500 mA
TS = 125°C
TJ = 150°C
1.000 Betriebsstunden
operating hours
IF = 500 mA
TS = 150°C
TJ = 175°C
100 Betriebsstunden
operating hours
10
P
0.2
1010
0-5 1010
-4 -3 10
-2 -1
0.5
1
I
FA
t
D
0.005
0.01
0.1
0.02
0.05
=
T
D
=
P
t
1010
t
0
p
1s2
T
I
F
OHL01470
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
LCW W5SG
2008-07-07 11
Maßzeichnung8) Seite 17
Package Outlines8) page 17
Kathodenkennung: Markierung
Cathode mark: mark
Gewicht / Approx. weight: 200 mg
Gurtung / Polarität und Lage8) Seite 17 Verpackungseinheit 800/Rolle, ø180 mm
Method of Taping / Polarity and Orientation8) page 17 Packing unit 800/reel, ø180 mm
GPLY6192
6.2 (0.244)
5.8 (0.228)
1.9 (0.075)
1.7 (0.067)
Cathode
R1.5 (0.059)
11.2 (0.441)
10.8 (0.425)
1.2 (0.047)
0.8 (0.031)
0...0.1 (0.004)
0.29 (0.011)
0.24 (0.009)
6.8 (0.268)
7.2 (0.283)
1.0 (0.039)
0.8 (0.031)
1.6 (0.063)
2.0 (0.079)
(ø4.2 (0.165))
Protection
Heat sink
A
C
Diode
OHAY0508
1.55 (0.061) 2 (0.079)
4 (0.157)
6.35 (0.250)
8 (0.315)
1.75 (0.069)
11.5 (0.453)
12.4 (0.488)
24 (0.945)
0.3 (0.012)
0.3 (0.012)
1.9 (0.075)
7.35 (0.289)
Cathode/Collector Side
2008-07-07 12
LCW W5SG
Empfohlenes Lötpaddesign8) Seite 17 IR Reflow Löten
Recommended Solder Pad8) page 17 IR Reflow Soldering
Solder resist
Freies Kupfer
Bare Copper
Lötpasten Schablone
Solder paste stencil
Lötstopplack
OHAY0681
0.3 (0.012)
Kupfer
Copper
1.6 (0.063)
11.6 (0.457)
12.0 (0.472)
2.3 (0.091)
2.3 (0.091)
10 (0.394)
1.6 (0.063)
11.6 (0.457)
3 Lötstellen
3 solder points
Thermal enhanced PCB
Thermisch optimiertes PCB
ø4.0 (0.157)
Heatsink attach
ø4.0 (0.157)
ø2.5 (0.098)
Footprint
Empfohlene
Padgeometrie
Recommended
Solder Pad
Design
Achtung:
Anode und
Heatsink sind
elektrisch
verbunden
Attention:
Anode and
Heatsink are
electrically
connected
LCW W5SG
2008-07-07 13
Lötbedingungen Vorbehandlung nach JEDEC Level 4
Soldering Conditions Preconditioning acc. to JEDEC Level 4
IR-Reflow Lötprofil für bleifreies Löten (nach J-STD-020B)
IR Reflow Soldering Profile for lead free soldering (acc. to J-STD-020B)
Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet
Note: Package not suitalbe for ultrasonic cleaning
OHLA0687
0
0
T
t
˚C
s
120 s max
50
100
150
200
250
300
Ramp Up
100 s max
50 100 150 200 250 300
Ramp Down
6 K/s (max)
3 K/s (max)
25 ˚C
30 s max
260 ˚C
+0 ˚C
-5 ˚C
245 ˚C
±5 ˚C
240 ˚C
255 ˚C
217 ˚C
Maximum Solder Profile
Recommended Solder Profile
235 ˚C
-0 ˚C
+5 ˚C
Minimum Solder Profile
10 s min
2008-07-07 14
LCW W5SG
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
Gurtverpackung
Tape and Reel
Tape dimensions in mm (inch)
W P0P1P2D0E F
4 ± 0.1
(0.157 ± 0.004) 8 ± 0.1
(0.315 ± 0.004) 2 ± 0.1
(0.079 ± 0.004) 1.5 + 0.1
(0.059 + 0.004) 1.75 ± 0.1
(0.069 ± 0.004) 11.5 ± 0.1
(0.453 ± 0.004)
Reel dimensions in mm (inch)
A W Nmin W1W2 max
180 (7) 24 (0.945) 60 (2.362) 24.4 + 2 (0.961 + 0.079) 30.4 (1.197)
Sample
OHA12043
X - X - X(G) GROUP:
Lot Number(1T) LOT NO: (9D) D/C: Date Code
(X) PROD NO: Product Code
(6P) BATCH NO: Batch Number
Lx xxxx
Product Name
RoHS Compliant
Bin1: Bin Information Color 1
Bin2:
Bin3:
ML
2Temp ST
260 C RT
Additional TEXT
R077 DEMY
PACKVAR: Packing Type
Product Quantity per Reel(Q)QTY:
Semiconductors
OSRAM Opto
Wavelength Group
Forward Voltage Group
Brightness Group
Bar Code
Bar Code
Bar Code
D
0
2
PP
0
1
P
W
FE
Direction of unreeling
N
W
1
2
W
A
OHAY0324
Label
Gurtvorlauf:
Leader:
Trailer:
Gurtende:
13.0
Direction of unreeling
±0.25
160 mm
160 mm
400 mm
400 mm
24+ 0.3
– 0.1
LCW W5SG
2008-07-07 15
Trockenverpackung und Materialien
Dry Packing Process and Materials
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte
Bezüglich Trocken verpa ckung finden Sie we itere Hinweise im Internet und in unsere m Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien
Transportation Packing and Materials
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately after
bag opening.
Discard if circles overrun.
Avoid metal contact.
WET
Do not eat.
Comparator
check dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%
bake units
bake units
If wet,
change desiccant
If wet,
Humidity Indicator
MIL-I-8835
If wet,
Moisture Level 3Floor time 168 HoursMoisture Level 6Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
OHA02044
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
0245
(Q)QTY:
2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
0245
(Q)QTY:
2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
OSRAM
Packing
Sealing label
Barcode label
Moisture Level 3Floor time 168 HoursMoisture Level 6 Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
Barcode label
2008-07-07 16
LCW W5SG
Anm.: Gemäß IEC 60825-1 (EN 60825-1) gilt:
LED STRAHLUNG
NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN
LED KLASSE 2
Note: According IEC 60825-1 (EN 60825-1):
LED RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 2 LED PRODUCT
Attention please!
The information describes the type of component and shall not be considere d as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components9) page 17 may only be used in life-support devices or systems10 ) page 17 with the express written approval of
OSRAM OS.
Revision History: 2008-07-07
Previous Version: 2007-08-09
Page Subjects (major changes since last revision) Date of change
10 Exemplary median Lifetime 2005-11-16
3, 10 completely rework 2005-12-21
10 Lifetime table 2006-01-17
12 solder pad reworked 2006-01-24
all Product Discontinuation OS-PD-2008-008 2008-07-07
Patent List
Patent No.
US 6 066 861
US 6 277 301
US 6 245 259
LCW W5SG
2008-07-07 17
Fußnoten:
1) Helligkeitswerte werden mit einer
Stromeinprägedauer von 25 ms und einer
Genauigkeit von ± 11% ermittelt.
2) Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische oder abgeleitete
technische Parameter nur aufgrund statistischer
Werte wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden diese
typischen Werte ohne weitere Ankündigu ng geändert.
3) -
4) Montage auf PC-Board - Metallkernplatine,
Fläche 950 mm², λ = 1,3 W/(m*K).
Für weitere Informationen siehe Applikationsschrift im
Internet (www.osram-os.com)
5) Farbortgruppen werden mit einer Stromeinprägedauer
von 25 ms und einer Genau igkeit von ±0.01 ermittelt.
6) Spannungswerte werden mit einer
Stromeinprägedauer von 1 ms und einer Genauigkeit
von ±0,1 V ermittelt.
7) Im gestrichelten Bereich der Kennlinien muss mit
erhöhten Helligkeitsunterschieden zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden
8) Maße werden wie folgt angegebe n: mm (inch)
9) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden Apparaten oder Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer Fehlfunktion dieses lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
10) Lebenserh altende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bes timmt.
Falls sie vers agen, kann davon ausg egangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1) Brightness groups are tested at a current pulse
duration of 25 ms and a tolerance of ± 11%.
2) Due to the special conditions of the manufacturing
processes of LED, the typical data or calculated
correlations of technical parameters can only reflect
statistical figures. These do not necessarily
correspond to the actual parameters of each single
product, which could differ from the typical data and
calculated correlations or the typical characteristic
line. If requested, e.g. because of technical
improv ements , these typ. data will be changed withou t
any further notice.
3) -
4) Mounted on PC board - metall core PCB,
area of 950 mm², λ = 1.3 W/(m*K).
For further Information pleas e find the application note
on our web site (www.osram-os.com)
5) Chromaticity coordin ate groups are tested at a current
pulse duration of 25 ms and a tolerance of ±0.01.
6) Forward voltages are tested at a current pulse
duration of 1 ms and a tole rance of ±0.1 V.
7) In the range where the line of the gra ph is broken , you
must expect higher brightness differences between
single LEDs within one packing unit.
8) Dimensions are specified as follows: mm (inch).
9) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
10) Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the user may be endangered.