Golden DRAGON(R) warm white Lead (Pb) Free Product - RoHS Compliant LCW W5SG Abgekundigt nach OS-PD-2008-008 Obsolete acc. to OS-PD-2008-008 Besondere Merkmale * Gehausetyp: weies SMD Gehause, farbiger diffuser Silikon - Verguss * Typischer Lichtfluss: 32 lm bei 500 mA * Besonderheit des Bauteils: hocheffiziente Lichtquelle bei geringem Platzbedarf * Farbort: x = 0,42, y = 0,40 nach CIE 1931 (warm wei) * typische Farbtemperatur: 3250 K * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaN * optischer Wirkungsgrad: 18 lm/W * Gruppierungsparameter: Lichtstrom, Farbort * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 24-mm Gurt mit 800/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D Features * package: white SMD package, colored diffused silicone resin * typical Luminous Flux: 32 lm at 500 mA * feature of the device: high efficient lightsource at low space * color coordinates: x = 0.42, y = 0.40 acc. to CIE 1931 (warm white) * typ. color temperature: 3250 K * viewing angle: Lambertian Emitter (120) * technology: InGaN * optical efficiency: 18 lm/W * grouping parameter: luminous flux, color coordinates * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 24 mm tape with 800/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Anwendungen * Raumbeleuchtung: Deckenbeleuchtung, Nischenbeleuchtung, Kronleuchter, Hangeleuchten, Wandleuchter * Flutlicht * Effekt- und Akzentbeleuchtung: Vitrinen, Mobelbeleuchtung, Markierungsbeleuchtung * Spezialbeleuchtung: Blitzlicht, Radbeleuchtung, Sicherheitsbeleuchtung * Gebaudebeleuchtung: Fassadenbeleuchtung, Treppenbeleuchtung * Auto: Innenbeleuchtung, Beleuchtung fur Make-up-Spiegel * Leselampen (z.B. Bus, Flugzeug) Applications * room lighting: ceiling light, cove lighting, chandeliers, pendants, sconces * flood light * effect and accent lighting: display cases, furniture illumination, marker lights * specialty lighting: flashlight, bicycle headlamps, security lights * architectural lighting: facade lighting, stairway lighting * automotive interior lighting: dome lighting, make-up mirror illumination * reading lamps (e.g. bus, airplane) 2008-07-07 1 LCW W5SG Bestellinformation Ordering Information Typ Emissions- Lichtstrom 1) Seite 17 farbe Lichtstarke2) Seite 17 Bestellnummer Type Color of Emission Luminous Intensity2) page 17 Ordering Code Luminous Flux1) page 17 IF = 350 mA V (mlm) !LCW W5SG-FZHX-4F6G white 15000 ... 33000 IF = 350 mA IV (mcd) 8000 (typ.) Q65110A3585 !Abgekundigt nach OS-PD-2008-008 - wird durch LCW W5SM ersetzt werden Obsolete acc. to OS-PD-2008-008 - will be replaced by LCW W5SM Letzte Bestellung / Last Order: 2009-01-10 Letzte Lieferung / Last Delivery: 2009-07-10 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LCW W5SG-FZHX-4F6G bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen FZ, GX, GY, GZ oder HX enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LCW W5SG-FZHX-4F6G bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -4F, -4G, -5F, -5G, -6F oder -6G enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Farbortgruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LCW W5SG-FZHX-4F6G means that only one group FZ, GX, GY, GZ or HX will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LCW W5SG-FZHX-4F6G means that only 1 chromaticity coordinate group -4F, -4G, -5F, -5G, -6F or -6G will be shippable on each reel (see page 5 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable. Vergleichstabelle Correlation Table Typ Type LCW W5SG-FZHX-4F6G 2008-07-07 Lichtstrom1) Seite 17 Luminous Flux1) page 17 Typischer Lichtstrom2) Seite 17 Typical Luminous Flux2) page 17 IF = 350 mA V (mlm) IF = 500 mA V (mlm) 15000 ... 33000 31700 2 LCW W5SG Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj 125 C (min.) IF (max.) IF 100 500 mA mA mA Durchlassstrom Forward current (TA=25C) Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM 1500 Sperrspannung Reverse voltage (TA=25C) VR not designed for V reverse operation Leistungsaufnahme Power consumption (TA=25C) Ptot 2.3 W Rth JS 9 K/W Warmewiderstand4) Seite 17 Thermal resistance4) page 17 Sperrschicht/Lotpad Junction/solder point 2008-07-07 3 LCW W5SG Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Farbkoordinate x nach CIE 19315) Seite 17 (typ.) 5) page 17 Chromaticity coordinate x acc. to CIE 1931 IF = 350 mA x 0.42 - Farbkoordinate y nach CIE 19315) Seite 17 (typ.) 5) page 17 Chromaticity coordinate y acc. to CIE 1931 IF = 350 mA y 0.40 - Abstrahlwinkel bei 50 % V (Vollwinkel) Viewing angle at 50 % V (typ.) 2 120 Grad deg. Durchlassspannung 6 Seite 17) Forward voltage6) page 17 IF = 350 mA (min.) (typ.) (max.) VF VF VF 3.1 3.8 4.1 V V V Sperrstrom Reverse current (max.) IR not designed for reverse operation A Temperaturkoeffizient von x Temperature coefficient of x IF = 350 mA; -40C T 85C (typ.) TCx see page 9 10-3/K Temperaturkoeffizient von y Temperature coefficient of y IF = 350 mA; -40C T 85C (typ.) TCy see page 9 10-3/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 350 mA; -40C T 85C (typ.) TCV -4.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 350 mA (typ.) opt 18 lm/W 2008-07-07 4 LCW W5SG Farbortgruppen5) Seite 18 5) page 18 Chromaticity Coordinate Groups 0.45 0.9 0.44 530 Cy 540 510 550 0.7 0.42 560 0.6 0.5 590 600 610 620 630 0.4 + 0.37 4F 0.4 0.5 0.6 0.7 0.8 0.34 0.9 Cx 0.46 0.3 0.45 0.35 0.44 0.2 4G 0.36 0.43 0.1 5F 0.42 0 5G 0.38 480 470 460 450 0.1 0 E 0.39 0.41 0.2 6F 0.40 580 490 6G 0.41 570 500 0.3 0.43 0.40 Cy 0.39 0.8 0.37 0.38 520 Cx OHA02588 Gruppe Group 4F 4G 5F 2008-07-07 Cx Cy 0.394 0.356 0.412 Gruppe Group Cx Cy 0.399 0.382 0.379 0.418 0.407 0.425 0.376 0.432 0.404 0.409 0.356 0.412 0.379 0.379 0.356 0.432 0.404 0.399 0.382 0.453 0.432 0.412 0.379 0.457 0.418 0.394 0.356 0.445 0.402 0.412 0.379 0.418 0407 0.432 0.404 0.434 0.427 0.445 0.402 0.453 0.432 0.425 0.376 0.431 0.404 5G 6F 6G 5 LCW W5SG Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstrom1) Seite 17 Luminous Flux1) page 17 V (mlm) Lichtstarke2) Seite 17 Luminous Intensity2) page 17 IV (mcd) FZ GX GY GZ HX 15000 ... 18000 ... 21000 ... 24000 ... 28000 ... 5500 (typ.) 6500 (typ.) 7500 (typ.) 8500 (typ.) 10000 (typ.) 18000 21000 24000 28000 33000 Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 5 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 5 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: GY-5F Example: GY-5F Helligkeitsgruppe Brightness Group Farbortgruppe Chromaticity Coordinate Group GY 5F Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Note: No packing unit / tape ever contains more than one brightness group. 2008-07-07 6 LCW W5SG Relative spektrale Emission2) Seite 17 Relative Spectral Emission2) page 17 V() = spektrale Augenempfindlichkeit / Standard eye response curve rel = f (); TA = 25 C; IF = 350 mA OHL12447 100 % rel V 80 60 40 20 0 400 450 500 550 600 650 700 750 nm 800 Abstrahlcharakteristik2) Seite 17 Radiation Characteristic2) page 17 rel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2008-07-07 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LCW W5SG Durchlassstrom2) Seite 17 Forward Current2) page 17 IF = f (VF); TA = 25 C IF 10 0 A Relative Lichtstrom2) 7) Seite 17 Relative Luminous Flux2) 7) page 17 V/V(350 mA) = f (IF); TA = 25 C OHL00830 OHL00831 10 1 V V (350 mA) 10 0 10 -1 10 -1 10 -2 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10 -2 1 10 V 6.0 VF Relative Lichtstrom2) Seite 17 Relative Luminous Flux2) page 17 V/V(25 C) = f (Tj); IF = 350 mA OHL02671 V V (25 C) VF 1.2 1.0 0.1 0.8 0 0.6 -0.1 0.4 -0.2 0.2 0 -60 -40 -20 0 20 40 60 C 100 Tj 2008-07-07 OHL12870 1.4 0.2 -0.3 -60 -40 -20 0 mA 10 3 IF Relative Vorwartsspannung2) Seite 17 Relative Forward Voltage2) page 17 VF = VF - VF(25 C) = f (Tj); IF = 350 mA 0.4 V 10 2 20 40 60 C 100 Tj 8 LCW W5SG Farbortverschiebung2) Seite 17 Chromaticity Coordinate Shift2) page 17 x, y = f (IF); TA = 25 C OHL02672 0.004 Cx Cx Cy 0 Cy -0.002 -0.004 -0.006 -0.008 -0.010 -0.012 -0.014 -0.016 -60 -40 -20 0 20 40 60 C 100 Tj 2008-07-07 9 LCW W5SG Exemplarische durchschnittliche2) Seite 17 Lebensdauer fur mittlere Helligkeitsgruppe Exemplary median Lifetime2) page 17 for median Brightness Group Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( TS ) IF OHL02093 600 mA Einheit 500 Bedingungen mittlere Lebensdauer Conditions median Lifetime 400 IF = 250 mA TS = 25C 50.000 Betriebsstunden operating hours 10.000 300 IF = 350 mA TS = 85C Betriebsstunden operating hours 1.000 Betriebsstunden operating hours 200 IF = 500 mA TS = 125C TJ = 150C 100 Betriebsstunden operating hours 100 IF = 500 mA TS = 150C TJ = 175C The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures.The median lifetime depends on the application TS temp. solder point 0 0 20 40 60 80 C 100 TS Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 25 C IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 85 C OHL01399 1.6 A tP tP D= T 1.4 IF IF T 1.6 A 1.4 D= 1.0 0.6 t D = TP IF T 0.5 D= 0.005 0.01 0.02 0.05 0.1 0.2 1.0 0.8 0.6 1 0.4 0.4 0.2 0.2 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2008-07-07 OHL01470 tP 1.2 1.2 0.8 Unit 10 LCW W5SG Mazeichnung8) Seite 17 Package Outlines8) page 17 11.2 (0.441) 10.8 (0.425) 1.2 (0.047) Heat sink Protection Diode R1.5 (0.059) 0.29 (0.011) 0.24 (0.009) Cathode C 1.9 (0.075) 1.0 (0.039) 1.7 (0.067) 0.8 (0.031) 2.0 (0.079) 6.8 (0.268) 5.8 (0.228) 7.2 (0.283) 6.2 (0.244) A 0.8 (0.031) (o4.2 (0.165)) 0...0.1 (0.004) 1.6 (0.063) GPLY6192 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 200 mg Gurtung / Polaritat und Lage8) Seite 17 Method of Taping / Polarity and Orientation8) page 17 Verpackungseinheit 800/Rolle, o180 mm Packing unit 800/reel, o180 mm 6.35 (0.250) 7.35 (0.289) 0.3 (0.012) 24 (0.945) 2 (0.079) 0.3 (0.012) 12.4 (0.488) 1.55 (0.061) 11.5 (0.453) 4 (0.157) 1.75 (0.069) Cathode/Collector Side 1.9 (0.075) 8 (0.315) OHAY0508 2008-07-07 11 LCW W5SG Empfohlenes Lotpaddesign8) Seite 17 Recommended Solder Pad8) page 17 1.6 (0.063) 2.3 (0.091) 11.6 (0.457) o2.5 (0.098) o4.0 (0.157) Empfohlene Padgeometrie Recommended Solder Pad Design 1.6 (0.063) Kupfer Copper 2.3 (0.091) Footprint 11.6 (0.457) 10 (0.394) Attention: Anode and Heatsink are electrically connected 12.0 (0.472) 0.3 (0.012) Achtung: Anode und Heatsink sind elektrisch verbunden IR Reflow Loten IR Reflow Soldering o4.0 (0.157) Heatsink attach 3 Lotstel en 3 solder points Thermisch optimiertes PCB Thermal enhanced PCB Lotstopplack Solder resist Lotpasten Schablone Solder paste stencil Bare Copper Freies Kupfer 2008-07-07 OHAY0681 12 LCW W5SG Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultrasonic cleaning 2008-07-07 13 s 300 LCW W5SG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code m (1T) LOT NO: Lot Number R077 Sa Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 24 + 0.3 - 0.1 4 0.1 8 0.1 2 0.1 1.5 + 0.1 1.75 0.1 11.5 0.1 (0.157 0.004) (0.315 0.004) (0.079 0.004) (0.059 + 0.004) (0.069 0.004) (0.453 0.004) Reel dimensions in mm (inch) A 180 (7) 2008-07-07 W Nmin W1 W2 max 24 (0.945) 60 (2.362) 24.4 + 2 (0.961 + 0.079) 30.4 (1.197) 14 LCW W5SG Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials P -1 +Q -1 D/ C: (9 D) 20 00 (Q )Q TY : ic S R NO : O em S BA TC H (6 P) LO T (1 T) NO : (X ) PR OD 5 14 2 110 0 M DE -1 18 (G ) GR OU P: P -1 +Q R u L lt S iT Y O T67 P L 6 8 01 C: 99 D/ TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 S NO O 12 H em H S TC (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) : 12 BA 3G R A on M du O p ct to or s 44 M 2100 Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster 01 44 8 2199 A on M du O p ct to or s . RH % /60 C R 18 T6 P 76 LE . H) (R e 3G H 12 34 y dit mi ag NO : 12 nk, bla cod bar d GR OU P: M ul LS ti Y TO el see lab e If hu ive _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W flo un Ho Af qu Indno ire DE 1. e 4 8 re dy ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G ) Muster L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE DE MY Barcode label D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2008-07-07 15 OHA02044 LCW W5SG Revision History: 2008-07-07 Previous Version: 2007-08-09 Page Subjects (major changes since last revision) Date of change 10 Exemplary median Lifetime 2005-11-16 3, 10 completely rework 2005-12-21 10 Lifetime table 2006-01-17 12 solder pad reworked 2006-01-24 all Product Discontinuation OS-PD-2008-008 2008-07-07 Anm.: Gema IEC 60825-1 (EN 60825-1) gilt: LED STRAHLUNG NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN LED KLASSE 2 Note: According IEC 60825-1 (EN 60825-1): LED RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 2 LED PRODUCT Patent List Patent No. US 6 066 861 US 6 277 301 US 6 245 259 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 17 may only be used in life-support devices or systems10 ) page 17 with the express written approval of OSRAM OS. 2008-07-07 16 LCW W5SG Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) 4) Montage auf PC-Board - Metallkernplatine, Flache 950 mm, = 1,3 W/(m*K). Fur weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com) 5) Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0.01 ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Mae werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 10) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2008-07-07 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. 17 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Mounted on PC board - metall core PCB, area of 950 mm, = 1.3 W/(m*K). For further Information please find the application note on our web site (www.osram-os.com) Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.