Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving vs. Wraparound Design
and PCR of 5 ppm at Rated Power
Document Number: 63106 For any questions, contact: foil@vishay.com www.vishay.com
Revision: 07-Jul-09 1
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
IMPROVED PRODUCT
INTRODUCTION
One of the most important parameters influencing stability is
the temperature coefficient of resistance (TCR). Although the
TCR of Bulk Metal® Foil resistors is considered extremely
low, this characteristic has been further refined over the
years.
The VFCP Series utilizes ultra precision Bulk Metal® Z-Foil.
The Z-Foil technology provides a significant reduction to the
resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
Along with the inherently low PCR and TCR, Z-Foil
technology also provides remarkably improved load life
stablility, low noise and availability of tight tolerance.
The flip chip configuration provides a substantial PCB space
saving of more than 35 % vs. a surface mount chip with
wraparound terminations. The VFCP is available in any
value within the specified resistance range.
Our application engineering department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
FEATURES
•Temperature coefficient of resistance (TCR):
± 0.05 ppm/°C typical (0 °C to + 60 °C)
± 0.2 ppm/°C typical (- 55 °C to + 125 °C,
+ 25 °C ref.)
•Tolerance: to ± 0.01 % (100 ppm)
•Power coefficient “ΔR due to self heating”
5 ppm at rated power
•Load life stability (70 °C for 2000 h): ± 0.005 % (50 ppm)
•Power rating to: 600 mW at + 70 °C
•Electrostatic discharge (ESD) up to 25 000 V
•Resistance range: 10 Ω to 125 kΩ (for lower and higher
values, please contact us)
•Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
•Non-inductive, non-capacitive design
•Short time overload ≤ 0.005 % (50 ppm)
•Non hot spot design
•Rise time: 1 ns effectively no ringing
•Current noise: - 40 dB
•Voltage coefficient < 0.1 ppm/V
•Non-inductive: < 0.08 µH
•Terminal finishes available: lead (Pb)-free, tin/lead alloy
•Compliant to RoHS directive 2002/95/EC
•Matched sets are available per request
•Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishay.com
•For better performances please contact us
APPLICATIONS
•Automatic test equipment (ATE)
•High precision instrumentation
•Laboratory, industrial and medical
•Audio
•EB applications (electron beam scanning and recording
equipment, electron microscopes)
•Military and space
•Airborne
•Down hole instrumentation
•Communication
* Pb containing terminations are not RoHS compliant, exemptions may apply
TABLE 1 - TOLERANCE AND TCR VS.
RESISTANCE VALUE
RESISTANCE
VALUE
(Ω)
TOLERANCE
(%)
TYPICAL TCR AND
MAX. SPREAD
(- 55 °C to + 125 °C,
+ 25 °C Ref.)
250 to 125K ± 0.01 ± 0.2 ± 1.6
100 to < 250 ± 0.02 ± 0.2 ± 1.6
50 to < 100 ± 0.05 ± 0.2 ± 1.8
25 to < 50 ± 0.1 ± 0.2 ± 2.8
10 to < 25 ± 0.25 ± 0.2 ± 2.8
Bottom View
FIGURE 1 - POWER DERATING CURVE
100
75
50
25
0
- 75 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temperature (°C)
Percent of Rated Power
+ 70 °C
- 55 °C
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
www.vishay.com For any questions, contact: foil@vishay.com Document Number: 63106
2Revision: 07-Jul-09
IMPROVED PRODUCT
Note
(1) As shown + 0.01 W to allow for measurement errors at low values.
FIGURE 2 - TRIMMING TO VALUES (Conceptual Illustration)
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Note: Foil shown in black, etched spaces in white
Interloop Capacitance
Reduction in Series
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Current Path
After Trimming
TABLE 2 - SPECIFICATIONS
CHIP
SIZE
RATED
POWER
(mW)
at + 70 °C
MAXIMUM
VOLTAGE
RATING
(≤)
RESISTANCE
RANGE (Ω)
MAXIMUM
WEIGHT
(mg)
0805 100 mW 28 V 10 to 8K 5.2
1206 250 mW 79 V 10 to 25K 10.3
1506 300 mW 95 V 10 to 30K 12
2010 400 mW 167 V 10 to 70K 25
2512 600 mW 220 V 10 to 125K 35
PR×
TABLE 3 - LOAD LIFE STABILITY
(+ 70 °C for 2000 h)
CHIP SIZE
MAXIMUM
Δ
R LIMITS
0805 ± 0.005 % at 50 mW
± 0.01 % at 100 mW
1206 ± 0.005 % at 150 mW
± 0.01 % at 250 mW
1506 ± 0.005 % at 150 mW
± 0.01 % at 300 mW
2010 ± 0.005 % at 200mW
± 0.01 % at 400 mW
2512 ± 0.005 % at 500 mW
± 0.01 % at 600 mW
TABLE 4 - PERFORMANCES
TEST OR CONDITION
MIL-PRF-55342
CHARACTERISTIC E
ΔR LIMITS
TYPICAL
ΔR LIMITS
MAXIMUM
ΔR LIMITS (1)
Thermal Shock ± 0.1 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
Low Temperature Operation ± 0.1 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
Short Time Overload ± 0.1 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
High Temperature Exposure ± 0.1 % ± 0.01 % (100 ppm) ± 0.02 % (200 ppm)
Resistance to Soldering Heat ± 0.2 % ± 0.005 % (50 ppm) ± 0.015 % (150 ppm)
Moisture Resistance ± 0.2 % ± 0.005 % (50 ppm) ± 0.02 % (200 ppm)
Load Life Stability + 70 °C for 2000 hours
at Rated Power
± 0.5 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
Document Number: 63106 For any questions, contact: foil@vishay.com www.vishay.com
Revision: 07-Jul-09 3
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
IMPROVED PRODUCT
Notes
• Avoid the use of cleaning agents which could attack epoxy resins, which form part of the resistor construction
• Vacuum pick up is recommended for handling
• Soldering iron is not applicable
Note
• The TCR values for < 100 Ω are influenced by the termination
composition and result in deviation from this curve
TABLE 5 - DIMENSIONS AND LAND PATTERN in inches (millimeters)
CHIP
SIZE
L
± 0.005 (0.13)
W
± 0.005 (0.13)
THICKNESS
MAXIMUM
D
± 0.005 (0.13) Z G X
0805 0.079 (2.01) 0.049 (1.24) 0.025 (0.64) 0.010 (0.25) 0.078 (1.98) 0.053 (1.35) 0.049 (1.24)
1206 0.126 (3.20) 0.062 (1.57) 0.025 (0.64) 0.015 (0.38) 0.125 (3.18) 0.090 (2.29) 0.062 (1.57)
1506 0.150 (3.81) 0.062 (1.57) 0.025 (0.64) 0.012 (0.30) 0.150 (3.81) 0.120 (3.05) 0.062 (1.57)
2010 0.200 (5.08) 0.100 (2.54) 0.025 (0.64) 0.020 (0.51) 0.199 (5.05) 0.153 (3.89) 0.100 (2.54)
2512 0.250 (6.35) 0.126 (3.20) 0.025 (0.64) 0.024 (0.61) 0.250 (6.35) 0.196 (4.98) 0.126 (3.20)
D
W
L
L - 0.005 (0.13)
W1 [W - 0.003"]
Solder Terminals
BOTTOM VIEW (showing terminals for mounting)LAND PATTERN
G
Z
X
FIGURE 3 - CHIP CONFIGURATION
Protective Coating
High Purity Alumina Substrate
Resistive
Bulk
®
Metal Foil
Solder
FIGURE 4 - TYPICAL RESISTANCE/
TEMPERATURE CURVE
(For more details, see Table 1)
+ 500
+ 200
+ 100
0
- 100
- 200
- 300
- 500
- 55 - 25 + 25 + 60 + 75 + 100 + 125
ΔR
R
(ppm)
0
0.05 ppm/°C
- 0.1 ppm/°C 0.1 ppm/°C
0.14 ppm/°C
0.2 ppm/°C
- 0.16 ppm/°C
- 400
+ 300
+ 400
Ambient Temperature (°C) and TCR Chord Slopes for
Differetn Termperature Ranges
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
www.vishay.com For any questions, contact: foil@vishay.com Document Number: 63106
4Revision: 07-Jul-09
IMPROVED PRODUCT
Note
(1) For non-standard requests, please contact application engineering.
TABLE 6 - GLOBAL PART NUMBER INFORMATION (1)
NEW GLOBAL PART NUMBER: Y163010K0000T9W (preferred part number format)
DENOTES PRECISION VALUE CHARACTERISTICS
YR = Ω
K = kΩ
0 = standard
9 = lead (Pb)-free
1 to 999 = custom
PRODUCT CODE RESISTANCE TOLERANCE PACKAGING
1629 = VFCP0805
1630 = VFCP1206
1631 = VFCP1506
1632 = VFCP2010
1633 = VFCP2512
T= ± 0.01 %
Q= ± 0.02 %
A= ± 0.05 %
B= ± 0.10 %
C= ± 0.25 %
D= ± 0.50 %
F= ± 1.00 %
R= tape and reel
W= waffle pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1630 10K0000 T 9 W:
TYPE: VFCP1206
VALUE: 10.0 kΩ
ABSOLUTE TOLERANCE: ± 0.01 %
TERMINATION: lead (Pb)-free
PACKAGING: waffle pack
HISTORICAL PART NUMBER: VFCP1206 10K000 TCR0.2 T S W (will continue to be used)
VFCP1206 10K000 TCR0.2 T S W
MODEL OHMIC VALUE TCR RESISTANCE
TOLERANCE TERMINATION PACKAGING
VFCP0805
VFCP1206
VFCP1506
VFCP2010
VFCP2512
10.0 kΩCharacteristic T= ± 0.01 %
Q= ± 0.02 %
A= ± 0.05 %
B= ± 0.10 %
C= ± 0.25 %
D= ± 0.50 %
F= ± 1.00 %
S= lead (Pb)-free
B= tin/lead
T= tape and reel
W= waffle pack
6301 K000Y1 T90 W0
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
