Datasheet PC177, 339 R03DS0139EJ0100 Rev.1.10 2020.05.12 Single Power Supply Quad Comparator DESCRIPTION PC177, PC339 comparators are designed for single power supply operation. The features include lowvoltage operation, common-mode input voltage range from V-(GND) level, open-collector output and low current consumption. Furthermore, these products can operate with both power supplies and can be widely used for various voltage comparison application. Depending on the usage and operating ambient temperature range, the PC177 is design for communication industries and PC339 is design for general purposes. Along with this series of lineup, the dual type comparators, PC277 and 393 with the same circuit configuration are also available. FEATURES Input Offset Voltage Input Bias Current Voltage Gain Pulse Response Time A wired OR is possible as the output is an open collector Low Voltage Operation 2 mV (TYP.) 25 nA (TYP.) 1.3 s (TYP.) 16 mA (TYP.) V + - V - : 2 ~ 32 V ORDERING INFORMATION Order Name PC177G2-A PC339G2-A R03DS0139EJ0101 Rev.1.10 2020.05.12 Selected Grade Standard Standard Package 14-pin plastic SOP ( 5.72 mm ( 225 )) 14-pin plastic SOP ( 5.72 mm ( 225 )) Page 1 of 7 PC177, 339 EQUIVALENT CIRCUIT (1/4 Circuit) PIN CONFIGURATION (Top View) V+ 100 A IN II + Q1 Q2 Q3 100 A Q4 Q8 - OUT Q7 Q5 PC177G2, PC339G2 OUT2 1 14 OUT3 OUT1 2 13 OUT4 V+ 3 4 - + 12 V - II1 4 11 IN4 IN1 5 10 II4 II2 6 Q6 1 - + IN2 7 2 - + 3 - + 9 IN3 8 II3 V- ABSOLUTE MAXIMUM RATINGS (TA = 25 C) Parameter Symbol PC177G2 PC339G2 Power Supply Voltage Note 1 V+ - V-0.3 ~ +36 Differential Input Voltage VID 36 Note 2 Input Voltage VI V -0.3 ~ V - +36 Note 3 Output Voltage VO V - -0.3 ~ V - +36 Total Power Dissipation Note 4 PT 550 Output Short Circuit Duration (vs. ts Indefinite GND) Note 5 Operating Ambient Temperature TA -40 ~ +85 -20 ~ +80 Storage Temperature Tstg -55 ~ +125 Note1. Note that reverse connections of the power supply may damage the ICs. Unit V V V V mW s C C 2. This is the input voltage range that can be applied to the input terminal without any characteristics degradation or breakdown. It can be applied regardless of the supply voltage. Do not apply the voltage below V-(GND)-0.3V. The comparator electrical characteristics will operate normally when the input voltage is operating within the common-mode input voltage range. 3. Voltage range that can be applied externally to the output terminal without deteriorating or damage to the product. It can be applied regardless of the power supply. Caution not to exceed the ratings, including transient conditions such as when the power supply is ON/OFF. 4. Power dissipation value when TA +25 C. For TA 25 C, de-rate at -5.5 mW/C 5. A short circuit to the V+ side may destroy the IC. Please use the total loss and de-rating value from Note 4. R03DS0139EJ0101 Rev.1.10 2020.05.12 Page 2 of 7 PC177, 339 RECOMMENDED OPERATING CONDITIONS Parameter Symbol Power Supply Voltage (Dual Supply) Power Supply Voltage (V - = GND) V V+ MIN. TYP. MAX. Unit 1 16 V +2 +32 V ELECTRICAL CHARACTERISTICS PC177G2, PC339G2 (TA = 25 C, V + = +5 V, V - = GND) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 2 5 mV VO = 1.4 V, VREF = 1.4 V, RS = 0 Input Offset Voltage VIO Input Offset Current IIO 5 50 nA VO 1.4 V Input Bias Current Note 6 IB 25 250 nA VO 1.4 V Large Signal Voltage Gain AV 200000 Current Note 7 ICC 0.8 Circuit Common Mode Input Voltage Range VICM Output Saturation Voltage VOL Output Sink Current IO SINK Output Leakage Current Pulse Response Time 0 RL = 15 k 2 mA V + -1.5 V 0.2 6 IO LEAK Note 8 0.4 RL = , IO = 0 A V VIN(-) = 1 V, VIN(+) = 0 V, IO SINK = 4 mA 16 mA VIN(-) = 1 V, VIN(+) = 0 V, VO 1.5 V 0.1 nA VIN(+) = 1 V, VIN(-) = 0 V, VO = 5 V 1.3 s RL = 5.1 k, VRL = 5 V TYPICAL APPLICATION CIRCUIT EXAMPLE Comparator with Hysteresis V+ V+ VIN 4, 6, 8, 10 5, 7, 9, 11 VREF + 3 RL INPUT VRL RL - OUTPUT 1, 2, 13, 14 OUTPUT + 12 R2 R1 VREF : V - ~ V + -1.5 [V] VREF Voltage Threshold VTH (High) VREF + VTH (Low) VREF - R1 (V - VREF) RL + R 2 + R1 RL R1 (V - VOL) R 1 + R2 REF (VRL > VREF > VOL) R03DS0139EJ0101 Rev.1.10 2020.05.12 Page 3 of 7 PC177, 339 ELECTRICAL CHARACTERISTICS CURVE (TA = 25 C, TYP.) (Reference Value) PT vs. TA (Absolute Maximum Rating) ICC vs. V + 1000 RL = 1.3 TA = 0 C 1.2 Supply Current, ICC [mA] Total Power Dissipation, PT [mW] 800 PC177G2, 339G2 600 400 182 C/W 200 1.1 TA = 25 C 1.0 0.9 TA = 70 C 0.8 0.7 0 0 20 40 60 80 100 0 Operating Ambient Temperature, TA [C] IB vs. V + VIO vs. TA 50 3 V + = +5 V V - = GND Any Sample Data 2 Input Bias Current, IB [nA] Input Offset Voltage, VIO [mV] 10 20 30 40 Power Supply Voltage, V + [V] (V - = GND) 1 0 -1 -2 -3 40 30 TA = 0 C TA = 25 C 20 TA = 70 C 10 -40 -20 0 20 40 60 80 Operating Ambient Temperature, TA [C] 0 10 20 30 40 Power Supply Voltage, V + [V] (V - = GND) VOL vs. IO SINK Output Saturation Voltage, VOL [V] 10 V+ V + /2 1 - IO SINK + 0.1 VO TA = 70 C TA = 25 C 0.01 0.001 0.01 V + = +15 V TA = 0 C 0.1 1 10 Output Sink Current IO SINK [mA] R03DS0139EJ0101 Rev.1.10 2020.05.12 100 Page 4 of 7 PC177, 339 Overdrive 5mV +5 V 5.1 k VI - 5 4 20 mV 3 2 Pulse Response Characteristics II VO + 100 mV 1 0 100 50 0 -50 -100 Overdrive 100mV 5 mV 0 0.5 1.0 Time, t [s] R03DS0139EJ0101 Rev.1.10 2020.05.12 20 mV 1.5 2.0 5 4 3 2 1 0 Input Voltage, VIN [V] Output Voltage, VO [V] Input Voltage, VIN [V] Output Voltage, VO [V] Pulse Response Characteristics I 5 4 3 2 Overdrive 100mV 20 mV VI 5 mV 1 +5 V 5.1 k + 0 100 50 0 -50 -100 VO 5 4 3 2 1 0 Overdrive 5mV 20 mV 100 mV 0 0.5 1.0 Time, t [s] 1.5 2.0 Page 5 of 7 PC177, 339 USE WITH PRECAUTIONS Managing unused circuits If there is an unused circuit, the following connection is recommended. Example of unused circuit process V+ + OUT () - (Open) To potentials within the range common-mode (VICMof) input voltage (VICM) V - V- Ratings of input/output pin voltage When the voltage of input/output pin exceeds the absolute maximum rating, the parasitic diode within the IC may conduct, causing characteristics degradation or damage. In addition, if the input pin is lower than V-, or the output pin exceeds the power supply voltage, it is recommended to make a clamping circuit using a diode with low forward voltage (e.g.: Schottky diode) as protection. Range of common-mode input voltage When the supply voltage does not meet the condition of electrical characteristics, the range of commonmode input voltage is as follows. VICM (TYP.): V - ~ V + -1.5 [V] (TA = 25 C) During designing, do include some tolerance by considering temperature characteristics etc. Regarding Input Current The Input Bias Current [IB] specified in the electrical characteristics table, is the average value of current flowing through the +input terminal [IN] and the current flowing through the -input terminal [II} in the balanced state of the differential amplifier circuit of the input stage (with negative feedback). Therefore, since the differential amplifier circuit of the input stage is not balanced during comparison operation (in the case of comparator operation), the input current flows twice as much towards the low potential terminal. Handling of ICs When stress is added to the ICs due to warpage or bending of a board, the characteristic may fluctuates due to piezoelectric (piezo) effect. Therefore, pay attention to warpage or bending of a board. R03DS0139EJ0101 Rev.1.10 2020.05.12 Page 6 of 7 PC177, 339 PACKAGE DRAWINGS 14-PIN PLASTIC SOP JEITA Package code P-SOP14-0225-1.27 RENESAS code PRSP0014DI-A Previous code P14GR-50-225B MASS (TYP.) [g] 0.14 Unit : mm detail of lead end NOTE Each lead centerline is located within 0.12 mm of its true position (T.P.) at maximum material condition. ITEM MILLIMETERS 10.2 0.26 A 1.42 MAX B C 1.27 (T.P) D E F G H I J K L M N P R03DS0139EJ0101 Rev.1.10 2020.05.12 +0.08 -0.07 0.1 0.1 +0.21 1.59 -0.2 1.49 6.5 0.2 4.4 0.1 1.1 0.16 +0.08 0.17 -0.07 0.6 0.2 0.1 0.10 +7 3 -3 0.42 Page 7 of 7 1. Notice Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples. 3. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by you or third parties arising from such alteration, modification, copying or reverse engineering. 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The intended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; industrial robots; etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc. Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user's manual or other Renesas Electronics document. 6. When using Renesas Electronics products, refer to the latest product information (data sheets, user's manuals, application notes, "General Notes for Handling and Using Semiconductor Devices" in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transactions. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document. 11. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. """Notice" 1. 2. 3. 4. 5. """" 6. "" 7. / 8. RoHS 9. (1) (UAV)(2)(3) / 10. 11. 12. 1 2 (Rev.4.0-1 November 2017) SALES OFFICES http://www.renesas.com Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics Corporation TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan Renesas Electronics America Inc. 1001 Murphy Ranch Road, Milpitas, CA 95035, U.S.A. Tel: +1-408-432-8888, Fax: +1-408-434-5351 Renesas Electronics Canada Limited 9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3 Tel: +1-905-237-2004 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 101-T01, Floor 1, Building 7, Yard No. 7, 8th Street, Shangdi, Haidian District, Beijing 100085, China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai 200333, China Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit No 3A-1 Level 3A Tower 8 UOA Business Park, No 1 Jalan Pengaturcara U1/51A, Seksyen U1, 40150 Shah Alam, Selangor, Malaysia Tel: +60-3-5022-1288, Fax: +60-3-5022-1290 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HAL 2nd Stage, Indiranagar, Bangalore 560 038, India Tel: +91-80-67208700 Renesas Electronics Korea Co., Ltd. 17F, KAMCO Yangjae Tower, 262, Gangnam-daero, Gangnam-gu, Seoul, 06265 Korea Tel: +82-2-558-3737, Fax: +82-2-558-5338 (c) 2019 Renesas Electronics Corporation. All rights reserved. Colophon 8.0