Automotive Relays Plug-in Mini ISO Relays Shrouded Power Relay F4 Pin assignment similar to ISO 7588 part 1 Plug-in terminals Customized versions on request - Integrated components (e.g. resistor, diode) - Customized marking Typical applications Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. Contact Data Contact arrangement 1 form C, 1 CO Rated voltage 12VDC 24VDC Limiting continuous current, NO/NC 23C 60/45A 85C 40/30A 125C 17/12A Limiting making current1) 120/45A Limiting breaking current 60/40A 20/15A Limiting short-time current overload current, ISO 8820-32) 1.35 x 40A, 1800s 2.00 x 40A, 60s 6.00 x 40A, 1s Jump start test, ISO 16750-1 24VDC for 5min, conducting nominal current at 23C Contact material silver based Min. recommended contact load3) 1A at 5VDC Initial voltage drop at 10A, NO contact, typ./max. 15mV/200mV NC contact, typ./max. 20mV/250mV Frequency of operation at nominal load 6 ops./min (0.1Hz) Operate/release time typ. 7/2ms4) Electrical endurance5)>1x105 ops. resistive load, NO contact 40A, 14VDC 20A, 28VDC Max. DC load breaking capacity F134-F4_Shrouded_tbw1 Contact Data (continued) Mechanical endurance >1x106 ops. 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 2) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 4) For unsuppressed relay coil. Any parallel device to the coil will increase the release time. 5) Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when used for inductive loads. Coil Data Rated coil voltage 12/24VDC Coil versions, DC coil Coil Rated Operate Release Coil Rated coil codevoltagevoltagevoltage resistance6)power6) VDCVDCVDC 10%W 05212 7.21.690 1.6 0642414.4 2.4360 1.6 6) Without components in parallel. All figures are given for coil without pre-energization, at ambient temperature +23C. Coil operating range TEVF4_OVR1 Does not t the tempe the contac E = pre-en Load limit curve 1: arc extinguishes during transit time (changeover contact). Load limit curve 2: safe shutdown, no stationary arc (make contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. 12-2017, Rev. 1217 www.te.com (c) 2017 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Does not take into account the temperature rise due to the contact current E = pre-energization. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 Automotive Relays Plug-in Mini ISO Relays Shrouded Power Relay F4 (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Other Data (continued) Terminal type Cover retention axial force pull force push force Terminal retention pull force push force resistance to bending force applied to side torque Weight Packaging unit 500Vrms 500Vrms 500Vrms Other Data EU RoHS/ELV compliance compliant Protection to heat and fire according UL94 UL94-HB or better Ambient temperature -40 to 125C Category of environmental protection, IEC 61810 RT I (dustproof), RT III (weatherproof - shrouded) Degree of protection, IEC 60529 IP54 (dustproof), IP67 (weatherproof), only with special connector Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g7) Shock resistance (functional) IEC 60068-2-27 (half sine) 11ms, min. 20g7) Drop test, free fall, IEC 60068-2-32 1m onto concrete plug-in, QC 150N 150N 200N 100N 100N 10N8) 10N8) 0.3Nm approx. 60g (2.1oz) 110 pcs. 7) No change in the switching state >10s. Valid for NC contacts, NO contact values significantly higher. 8) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. Accessories For details see datasheet Connectors for Mini, Mini (Shrouded) and Maxi ISO Relays 18.6 Terminal Assignment 9.0 COD 1 form C, 1 CO with diode CO 1 form C, 1 CO 22.5 COR 1 form C, 1 CO with resistor 6.4 85 87 87a 85 87 87a 85 87 87a 0.39 MAX. 30 86 30 86 30 86 11.5 MAX. 12.25 Dimensions 4.1 MAX. 4.25 Product codes V23134-A4052-X543 and V23134-A4064-X550 18.6 9.0 View of the terminals (bottom view) 6.3 TYP. 32.0 MAX. 4.0 25.0 MAX. 18.6 TE1347-82 9.0 22.5 6.4 7.25 22.5 32.0 MAX. 6.4 30 0.39 0.39 MAX. MAX. 17.9 86 85 87A 8.4 4.25 12.25 12.25 7.25 7.25 8.0 4.1 MAX. 4.1 MAX. 4.25 6.3 TYP. 6.3 TYP. 4.5 32.0 MAX. 32.0 MAX. 4.0 25.0 MAX. 25.0 MAX. 87 11.5 11.5 MAX. MAX. 16.8 4.0 TE1347-82 TE1347-82 2 32.0 MAX. 32.0 MAX. 86 85 8.4 87A 86 87A 85 8.4 Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. 30 30 12-2017, Rev. 1217 www.te.com (c) 2017 TE Connectivity. 17.9 17.9 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 8 8 9.0 Automotive Relays Plug-in Mini ISO Relays 18.5 0.25 45.0 0.5 Shrouded Power Relay F4 (Continued) 4.20 11.5 MAX. Dimensions 6.3 of the terminals (bottom view) View Product codes V23134-A4052-X544, V23134-A4052-X549 and V23134-A4064-X551 19.7 0.15 7.5 0.45 36.1 MAX. 36.1 MAX. 16.6 0.15 6.6 9.0 18.5 0.25 30 45.0 0.5 85 87a 17.9 8.4 4.20 0.15 86 87 11.5 MAX. 8.0 6.3 19.7 0.15 7.5 0.45 11.50 0.15 36.1 MAX. 36.1 MAX. 16.8 12.0 0.38 7.0 REF. TE1348-91 30 Product code structure V23134-A 4 052 -X544 Typical product code Type 85 87a V23134 Power Relay F417.9 8.4 86 Contact arrangement 87 A 1 form C, 1 CO Cover 8.0 4 Shrouded with bracket Coil 16.8 12.0 0.38 052 12VDC 064 24VDC Terminal / arrangement Xnnn Customized (nnn: version number) Product code V23134-A4052-X543 V23134-A4052-X544 V23134-A4052-X549 V23134-A4064-X551 V23134-A4064-X550 Equivalent to Arrangement VF4A-55F11-S01 1 form C, (8-1393305-7) 1 CO VF4A-65F11-S01 (9-1393305-5) VF4A-65F11-S05 (9-1393305-6) VF4A-65H11-S08 (9-1393305-9) VF4A-55H11-S05 (8-1393305-9) Cover Coil suppression Circuit1) Coil Contact material Terminals Part number Dustproof Resistor 680 COR 12VDC Silver based Plug-in, QC 2-1904131-9 Weatherproof Dustproof 3-1904131-5 Diode (cathode 86) COD Resistor 2700 COR Diode (cathode 86) COD 3-1904131-3 24VDC 3-1904131-7 3-1904131-6 1) See terminal assignment diagrams. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 12-2017, Rev. 1217 www.te.com (c) 2017 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3