BAS16WS VISHAY Vishay Semiconductors Small Signal Diodes Features * Silicon Epitaxial Planar Diode * Fast switching diode * Also available in case SOT-23 with designation BAS16 Mechanical Data Case: SOD-323 Plastic Case Weight: approx. 4 mg Marking: A6 Packaging Codes/Options: D5/10 K per 13" reel (8 mm tape), 30 K/box 17431 D6/3 K per 7" reel (8 mm tape), 30 K/box Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Reverse voltage Peak reverse voltage Forward current (continuous) Non-repetitive peak forward current Value Unit VR 75 V VRM 100 V IF 250 mA t = 1 s IFSM 2.0 A t = 1 ms IFSM 1.0 A t=1s IFSM 0.5 Power dissipation 1) Symbol Ptot 200 A mW 1) Valid provided electrodes are kept at ambient temperature Thermal Characteristics Tamb = 25 C, unless otherwise specified Symbol Value Unit Maximum junction temperature Parameter Test condition Tj 150 C Storage temperature TS - 65 to 150 C Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Forward voltage Leakage current Document Number 85752 Rev. 3, 24-Jun-03 Max Unit IF = 1 mA Test condition Symbol VF Min Typ. 715 mV IF = 10 mA VF 855 mV IF = 50 mA VF 1.00 V IF = 150 mA VF 1.25 V VR = 25 V, TJ = 150 C IR 30 A VR = 75 V IR 1 A VR = 75 V, TJ = 150 C IR 50 A www.vishay.com 1 BAS16WS VISHAY Vishay Semiconductors Parameter Test condition Capacitance VR = 0; f = 1 MHz Reverse recovery time IF = 10 mA to IR = 10 mA, IR = 1 mA, RL = 100 Thermal resistance junction to ambient air Symbol Max Unit Ctot Min Typ. 2 pF trr 6 ns RJA 650 C/W Typical Characteristics (Tamb = 25 C unless otherwise specified) 18105 18185 Figure 1. Forward characteristics 17438 Figure 2. Dynamic Forward Resistance vs. Forward Current www.vishay.com 2 Figure 3. Admissible Power Dissipation vs. Ambient Temperature 17440 Figure 4. Relative Capacitance vs. Reverse Voltage Document Number 85752 Rev. 3, 24-Jun-03 BAS16WS VISHAY Vishay Semiconductors 17441 Figure 5. Leakage Current vs. Junction Temperature 18106 Figure 6. Admissible Repetitive Peak Forward Current vs. Pulse Duration Document Number 85752 Rev. 3, 24-Jun-03 www.vishay.com 3 BAS16WS VISHAY Vishay Semiconductors Package Dimensions in Inches (mm) .012 (0.3) .065 (1.65) .076 (1.95) .100 (2.55) .112 (2.85) Cathode Band .059 (1.5) .006 (0.15) max. .004 (0.1) max. .049 (1.25) max. .043 (1.1) .010 (0.25) min. 17443 Mounting Pad Layout 0.062 (1.60) 0.047 (1.20) 0.055 (1.40) 17444 www.vishay.com 4 Document Number 85752 Rev. 3, 24-Jun-03 BAS16WS VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85752 Rev. 3, 24-Jun-03 www.vishay.com 5