SF2136E * Steep Roll-off Filter for 433.92 MHz Unlicensed Band * No Matching Required for Operation in 50 Environment * Complies with Directive 2002/95/EC (RoHS) 433.92 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C 265 C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min Typ Max 433.92 3 dB Bandwidth MHz 5 Insertion Loss, 433.05 to 434.79 MHz IL Amplitude Ripple, p-p, 433.05 to 434.79 MHz Units MHz 2.0 3.3 0.3 1.5 Attenuation Referenced to 0 dB: 389.0 to 392.0 MHz 42 54 411.0 to 414.0 MHz 40 50 454.0 to 457.0 MHz 40 51 475.0 to 478.5 MHz 42 52 863.0 to 870.0 MHz 41 dB 35 Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator Standard Reel Quantity 682, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Input Terminals 2 Output 5 Case Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. Page 1 of 5 SF2136E - 2/10/11 SF2136E Frequency Response Plots 15 Oct 2010 22:56:43 CH1 S2 1 LO G 10 dB/ RE F -4 0 d B 5 : -51 . 17 0 dB 4 54 . 000 000 M Hz sf2136 e CH1 Ma rkers 1 : -53 . 099 dB 38 9 . 000 M Hz 2 : -52 . 868 dB 39 2 . 000 M Hz 3 : -51 . 531 dB 41 1 . 000 M Hz 4 : -48 . 401 41 4 . 000 dB M Hz 5 4 1 CENTER www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. 3 2 433 . 9 20 000 MHz S PAN 1 00 . 000 0 00 MHz Page 2 of 5 SF2136E - 2/10/11 15 Oct 2010 22:59:11 CH1 S2 1 LO G 1 d B/ RE F -1 .01 1 d B 2 : - . 0 67 70 dB 1 . 74 0 000 M Hz sf2136 e RIPPL E CH1 m ean M arkers REF=1 : -1 . 7 339 dB C s . d ev : . 0 424 0 dB p-p : . 16 000 dB 2 1 Resp CENTER www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. 433 . 920 00 0 M Hz SPAN 10 . 000 00 0 MHz Page 3 of 5 SF2136E - 2/10/11 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.30 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.051 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B 1 3 6 682 YWWS A 2 5 E 4 D www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 4 of 5 SF2136E - 2/10/11 Tape and Reel Specifications "B" REF. 100 REF. "B" Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2136E - 2/10/11