MCC 1N5221 THRU 1N5276 omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features * * * * 500 mW Zener Diode 2.4 to 150 Volts Wide Voltage Range Available Glass Package High Temp Soldering: 260C for 10 Seconds At Terminals Marking : Cathode band and type number Maximum Ratings * * * * * DO-35 Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C 500 mWatt DC Power Dissipation Power Derating: 4.0mW/C above 50C Forward Voltage @ 200mA: 1.1 Volts Figure 1 - Typical Capacitance D 100 A Cathode Mark pf 10 B At zero volts At -2 Volts V R D 1 0 100 C 200 VZ Typical Capacitance (pf) - versus - Zener voltage (VZ) Figure 2 - Derating Curve 400 DIMENSIONS mW DIM A B C D 200 INCHES MIN ------1.000 MAX .166 .079 .020 --- MM MIN ------25.40 MAX 4.2 2.00 .52 --- NOTE 50 100 150 Temperature C Power Dissipation (mW) - Versus - Temperature C 0 Revision: 4 www.mccsemi.com 1 of 5 2008/01/01 MCC 1N5221 thru 1N5276 Micro Commercial Components ELECTRICAL CHARACTERISTICS @25C MCC PART NUMBER NOMINAL ZENER VOLTAGE VZ @ IZT VOLTS 1N5221 1N5222 1N5223 1N5224 1N5225 1N5226 1N5227 1N5228 1N5229 1N5230 1N5231 1N5232 1N5233 1N5234 1N5235 1N5236 1N5237 1N5238 1N5239 1N5240 1N5241 1N5242 1N5243 1N5244 1N5245 1N5246 1N5247 1N5248 1N5249 1N5250 1N5251 1N5252 1N5253 1N5254 1N5255 1N5256 1N5257 1N5258 1N5259 1N5260 1N5261 1N5262 1N5263 1N5264 1N5265 1N5266 1N5267 1N5268 1N5269 1N5270 1N5271 1N5272 1N5273 1N5274 1N5275 1N5276 2.4 2.5 2.7 2.8 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.0 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 82 87 91 100 110 120 130 140 150 TEST CURRENT I ZT mA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9.0 8.5 7.8 7.4 7.0 6.6 6.2 5.6 5.2 5.0 4.6 4.5 4.2 3.8 3.4 3.2 3.0 2.7 2.5 2.2 2.1 2.0 1.8 1.7 1.5 1.4 1.4 1.3 1.1 1.0 0.95 0.90 0.85 MAXIMUM ZENER IMPEDANCE `B' SUFFIX ONLY Z ZT @ IZT Z ZK @I ZK = 0.25mA OHMS OHMS MAXIMUM REVERSE LEAKAGE CURRENT IR @ VR A VOLTS 30 30 30 30 29 28 24 23 22 19 17 11 7.0 7.0 5.0 6.0 8.0 8.0 10 17 22 30 13 15 16 17 19 21 23 25 29 33 35 41 44 49 58 70 80 93 105 125 150 170 185 230 270 330 370 400 500 750 900 1100 1300 1500 100 100 75 75 50 25 15 10 5.0 5.0 5.0 5.0 5.0 5.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 1.0 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1200 1250 1300 1400 1600 1600 1700 1900 2000 1900 1600 1600 1600 1000 750 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1400 1600 1700 2000 2200 2300 2600 3000 4000 4500 4500 5000 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 3.5 4.0 5.0 6.0 6.5 6.5 7.0 8.0 8.4 9.1 9.9 10 11 12 13 14 14 15 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 62 68 69 76 84 91 99 106 114 MAX. ZENER VOLTAGE TEMP COEFFICIENT `B' SUFFIX ONLY % / C -0.085 -0.085 -0.080 -0.080 -0.075 -0.070 -0.065 -0.060 0.055 0.030 0.030 +0.038 +0.038 +0.045 +0.050 +0.058 +0.062 +0.065 +0.068 +0.075 +0.076 +0.077 +0.079 +0.082 +0.082 +0.083 +0.084 +0.085 +0.086 +0.086 +0.087 +0.088 +0.089 +0.090 +0.091 +0.091 +0.092 +0.093 +0.094 +0.095 +0.095 +0.096 +0.096 +0.097 +0.097 +0.097 +0.098 +0.098 +0.099 +0.099 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 NOTE 1: Table as shown lists type numbers, which indicate a tolerance of 20% with guaranteed limits on only Vz, IR, and V F. Devices with guaranteed limits on all six parameters are indicated by suffix "A" for 10%, "B" for 5%, "C" for 2%, and "D" for 1% tolerance NOTE 2: The electrical characteristics are measured after allowing the device to stabilize for 20 seconds. NOTE 3: Temperature coefficient (aVZ). Test conditions for temperature coefficient are as follows: a. IZT = 7.5mA, TI = 25oC T2 = 125oC (1N5221 thru 1N5242) b. IZT = Rated IZT , TI = 25oC, T2 = 125oC (1N5243 thru 1N5276) Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature. Revision: 4 www.mccsemi.com 2 of 5 2008/01/01 TM MCC 1N5221 1N thru 1N5276 TM Micro Commercial Components Figure 1 Zener Voltage versus Zener Current - Vz =1 thru 16 Volts 20 10 TA=25 1 mA 0.1 0.01 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 29 30 VOLTS IZ , ZENER CURRENT - mA VZ , ZENER VOLTAGE - V Figure 2 Zener Voltage versus Zener Current - Vz =15 thru 30 Volts 20 10 TA=25 1 mA 0.1 0.01 15 16 17 18 19 20 21 22 23 24 25 26 27 28 VOLTS IZ , ZEBER CURRENT - mA VZ , ZENER VOLTAGE - V Revision: 4 www.mccsemi.com 3 of 5 2008/01/01 MCC 1N5221 thru 1N5276 TM Micro Commercial Components Figure 3 Zener Voltage versus Zener Current - Vz =30 thru 75 Volts 20 10 TA=25 1 mA 0.1 0.01 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 VOLTS IZ , ZENER CURRENT - mA VZ , ZENER VOLTAGE - V Figure4 Thermal resistance from junction to ambient as a function of pulse duration 10 3 =1 0.75 0.50 0.33 102 0.20 0.10 0.05 Rth j-a(K/W) 0.02 0.01 0.001 10 1 10-1 1 10 10 2 10 3 104 105 tp(ms) Revision: 4 www.mccsemi.com 4 of 5 2008/01/01 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel; 10Kpcs/Reel (Part Number)-AP Ammo Packing;5Kpcs/AmmoBox (Part Number)-BP Bulk;500pcs/Bag ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 4 5 of 5 2008/01/01