B65615B0001X000 - EPCOS - Product.Network

Ferrites and accessories

Series/Type: P 36 x 22

The following products presented in this data sheet are being withdrawn.

Ordering Code Substitute Product Date of Withdrawal Deadline Last

Orders

Last Shipments

B65612A5000X000 2010-09-24 2010-12-17 2011-03-28

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a

suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.

209/06

Please read Cautions and warnings and

Important notes at the end of this document.

■Delivery mode: sets

Magnetic characteristics (per set)

Approx. weight (per set)

Gapped

Ungapped

with

center hole

without

center hole

Σl/A

Amin

0.26

202

—

10500

0.25

53.5

213

173

11400

mm–1

mm2

mm3

m57 59.5g

Material AL value

approx.

µeOrdering code 1)

-D with center hole

-T with threaded sleeve

N48 250 ±3% 1.20 51 B65611+0250A048

400 ±3% 0.62 82 B65611+0400A048

630 ±3% 0.35 129 B65611+0630A048

1000 ±3% 0.22 205 B65611+1000A048

Material AL value

µeOrdering code

-D with center hole

-W without center hole

N48 7600 +30/–20% 1560 B65611D0000R048

N30 15200 +30/–20% 3040 B65611W0000R030

FPK0358-W

126

4.3 min.

29.9+0.8

36 1

ø5.4+0.3

0.4ø16.2

0.9+0.2

14.6+0.4

0.622

3.75±0.15

1) Replace the + by the code letter ”D“ or ”T“ for the required version.

B65611Core

P 36 × 22

309/06

Please read Cautions and warnings and

Important notes at the end of this document.

Coil former

Standard: to IEC 60133

Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:

F max. operating temperature 155 °C), color code black

Valox 420-SE0® [E45329 (M)], GE PLASTICS B V

Winding: see Data Book 2007, chapter “Processing notes, 2.1”

Insulating washer between core and coil former

■For tolerance compensation and for insulation

■Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0.08 mm thick

Aryphan F685, [E167358 (M)], natural color, LOFO HIGH TECH FILM GMBH

Coil former

Insulating washer

Coil former Ordering code

Sections AN

mm2

AR value

µΩ

1 63 73 39 B65612B0000T001

Insulating washer (reel packing, PU = 1 reel) B65612A5000X000

FPK0271-H

3+0,8

0,8

14,4

ø17,9

ø16,5+0,2

0,229,6

0,2

FPK0167-I

(preliminary data)

B65612Accessories

P 36 × 22

4 08/07

Please read Cautions and war nings and

Import ant not es at the end of this document.

Mounting assembly for printed circuit boards

■The set comprises a terminal carrier and a yoke

Terminal carrier

Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:

F max. operating temperature 155 °C), color code black

Pocan B4235® [E245249 (M)], LANXESS AG

Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s

Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3.5 s

Yoke

Spring yoke, made of nickel silver (0.6 mm), with ground terminal

Complete mounting assembly (10 solder terminals)

Ordering code: B65615B0001X000

FPK0168-R-E

12 x 2.52 = 30.24

2.52

11 x 2.52 = 27.72

Ground

ø1.3+0.1

41.8 max.

40 max.

27.5 max.

0.23.5

Ground terminal

Hole arrangement

View in mounting direction

a) Yoke

b) Terminal carrier with 10 solder terminals

B65615Accessories

P 36

509/06

Please read Cautions and warnings and

Important notes at the end of this document.

Adjusting screw

■Tube core with thread and core brake made of GFR polyterephthalate

Pocan B3235® [E245249 (M)], LANXESS AG

Note:

Due to the limited distance between adjusting screw and internal borehole, the entire assembly

must be accurately centered.

Tube core Ordering code

∅ × length (mm) Material Color code

4.55 × 6.3 N22 red B65679E0003X022

4.98 × 6.3 N22 black B65679E0002X022

B65679Accessories

P 36 × 22

609/06

Ferrites and accessories

Cautions and warnings

Mechanical stress and mounting

Ferrite cores have to meet mechanical requirements during assembling and for a growing number

of applications. Since ferrites are ceramic materials one has to be aware of the special behavior

under mechanical load.

As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing

or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic loads

can cause cracks or failure of the ferrite cores.

For detailed information see Data Book 2007, chapter “General – Definitions, 8.1”.

Effects of core combination on AL value

Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent

that the initial permeability is dependent on the stress state of the core. The higher the stresses are

in the core, the lower is the value for the initial permeability. Thus the embedding medium should

have the greatest possible elasticity.

For detailed information see Data Book 2007, chapter “General – Definitions, 8.2”.

Heating up

Ferrites can run hot during operation at higher flux densities and higher frequencies.

NiZn-materials

The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.

Processing notes

– The start of the winding process should be soft. Else the flanges may be destroid.

– To strong winding forces may blast the flanges or squeeze the tube that the cores can no more

be mount.

– To long soldering time at high temperature (>300 °C) may effect coplanarity or pin arrangement.

– Not following the processing notes for soldering of the J-leg terminals may cause solderability

problems at the transformer because of pollution with Sn oxyd of the tin bath or burned insulation

of the wire. For detailed information see Data Book 2007, chapter “Processing notes, 2.2”.

– The dimensions of the hole arrangement have fixed values and should be understood as a

recommendation for drilling the printed circuit board. For dimensioning the pins, the group of

holes can only be seen under certain conditions, as they fit into the given hole arrangement. To

avoid problems when mounting the transformer, the manufacturing tolerances for positioning the

customers’ drilling process must be considered by increasing the hole diameter.

709/06

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As

a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic components

or failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in which

the malfunction or failure of a passive electronic component could endanger human life or health

(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of

suitable design of the customer application or other action taken by the customer (e.g.

installation of protective circuitry or redundancy) that no injury or damage is sustained by third

parties in the event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products.

Consequently, we cannot guarantee that all products named in this publication will always be

available.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version

of the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, EPCOS-JONES, Baoke, Alu-X, CeraDiode, CSSP, MLSC,

PhaseCap, PhaseMod, SIFI, SIFERRIT, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,

UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.

Further information will be found on the Internet at www.epcos.com/trademarks.