Data sheet
Creation date January 15, 2019 4:07:15 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1
RIDERSERIES RCM
RCMKITP-I 24VDC 4CO LD
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
General ordering data
Type RCMKITP-I 24VDC 4CO LD
Order No. 8921120000
Version RIDERSERIES RCM, Relay module, No. of contacts:
4 CO contact with test button AgNi 90/10, Rated
control voltage: 24 V DC, Continuous current: 6 A,
PUSH IN
GTIN (EAN) 4032248692330
Qty. 10 pc(s).
Modular system comprised of:
• relay socket for rail mounting
• LED indicator unit
• retaining clip
• plug-in relay
• markers
Data sheet
RIDERSERIES RCM
RCMKITP-I 24VDC 4CO LD
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 15, 2019 4:07:15 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 28 mm Width (inches) 1.102 inch
Height 98 mm Height (inches) 3.858 inch
Depth 78.3 mm Depth (inches) 3.083 inch
Net weight 96.45 g
Temperatures
Humidity 40 °C / 93 % rel. humidity,
no condensation
Operating temperature, max.
70 °C
Operating temperature, min. -40 °C Storage temperature, max. 70 °C
Storage temperature, min. -40 °C Operating temperature -40 °C...70 °C
Storage temperature -40 °C...70 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Input
Rated control voltage 24 V DC Rated current DC 31.3 mA
Power rating 740 mW Pull-in/drop-out voltage, typ. 18 V / 2.4 V DC
Coil resistance 777 Ω ± 10 % Status indicator Green LED
Protective circuit Free-wheel diode
Output
Rated switching voltage 240 V AC Max. switching voltage, AC 240 V
Continuous current 6 A Inrush current 12 A / 20 ms
AC switching capacity (resistive), max. 1500 VA DC switching capacity (resistive), max. 144 W @ 24 V
Switch-on delay ≤ 15 ms Switch-off delay ≤ 10 ms
Min. switching power 1 mA @ 24 V, 10 mA @ 12
V, 100 mA @ 5 V
Max. switching frequency at rated load
0.1 Hz
Contact data
Contact type
4 CO contact with test
button (AgNi 90/10)
Mechanical service life AC coil 20 x 106 Switch.
cycles, DC coil 30 x 106
Switch. cycles
General data
Mounting rail TS 35 Test button yes (lockable)
Mechanical switch position indicator Yes Colour Black
Insulation coordination
Rated voltage 250 V Surge voltage category III
Pollution severity 2 Insulating material group IIIa
Protection degree IP20 Dielectric strength input – output 2.5 KVeff / 1 min.
Creepage and clearance distance input –
output ≥ 4 mm
Dielectric strength of neighbouring
contacts 2 kVeff / 1 min
Dielectric strength of open contact 1.2 kVeff / 1 min. Impulse withstand voltage 5 kV (1.2/50 µs)
Data sheet
RIDERSERIES RCM
RCMKITP-I 24VDC 4CO LD
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 15, 2019 4:07:15 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3
Further details of approvals / standards
Standards DIN EN 50178 Certificate no. (CSA) relay 249409-2426937
Certificate no. (CSA) base 249409-2295474 Certificate No. (DNVGL) TAA000011A
Certificate no. (cURus) relay E224238 Certificate no. (cURus) base E223759
Connection data
Wire connection method PUSH IN Stripping length, rated connection 12 mm
Clamping range, rated connection 1.5 mm² Clamping range, min. 0.75 mm²
Clamping range, max. 1.5 mm² Wire cross-section, solid, min. 0.75 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross-section, finely
stranded, min. 0.75 mm²
Wire connection cross section, finely
stranded, max. 1.5 mm²
Wire cross-section, finely stranded, max.
(AWG) AWG 16
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.75 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 0.75 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), min. 0.75 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max. 1 mm²
Blade size 0.6 x 3.5 mm
Classifications
ETIM 3.0 EC001437 ETIM 4.0 EC001437
ETIM 5.0 EC001437 ETIM 6.0 EC001437
UNSPSC 30-21-19-17 eClass 5.1 27-37-16-01
eClass 6.2 27-37-16-01 eClass 7.1 27-37-16-01
eClass 8.1 27-37-16-01 eClass 9.0 27-37-16-01
eClass 9.1 27-37-16-01
Approvals
Approvals
ROHS Conform
Downloads
Approval/Certificate/Document of
Conformity DE_PA5600_160414_002.pdf
Brochure/Catalogue CAT 4.2 ELECTR 18/19 EN
Engineering Data EPLAN, WSCAD, Zuken E3.S
Engineering Data STEP
Data sheet
RIDERSERIES RCM
RCMKITP-I 24VDC 4CO LD
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date January 15, 2019 4:07:15 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4
Wiring diagram Graph
DC load limit curve
Resistive load
Graph
Derating curve
Relay in combination with base
Graph
DC operational voltage range
Graph
Electrical service life250 V AC resistive load
250 V AC resistive load
Dimensional drawing
Data sheet
RIDERSERIES RCM
RCMKITP-I 24VDC 4CO LD
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date January 15, 2019 4:07:15 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5
