MODEL LCC30A-1 LCC30A-2 LCC30A-3 LCC30A-4
DC OUTPUT
V1 5V 3.0(Peak 4.5)A 5V 3.0(Peak 4.5)A 5V 3.0(Peak 4.5)A 3.3V 4.0(Peak 6.0)A
V2 12V 1.2(Peak 2.0)A 15V 1.0(Peak 2.0)A 24V 0.5(Peak 1.3)A 12V 1.2(Peak 2.0)A
V3
*1
12V 0.3(Peak 0.45)A 15V 0.3(Peak 0.45)A 5V 0.5(Peak 0.75)A 5V 0.5(Peak 0.75)A
SPECIFICATIONS
MODEL LCC30A-1 LCC30A-2 LCC30A-3 LCC30A-4
INPUT
VOLTAGE[V] AC85 - 132 1for DC110 - 170
CURRENT[A]
ACIN 100V
0.8typ (Io=100%)
FREQUENCY[Hz] 47 - 440 or DC
EFFICIENCY[%]
ACIN 100V
72typ (Io=100%)67typ (Io=100%)
INRUSH CURRENT[A]
ACIN 100V
25typ (Io=100%)(
At cold start)
LEAKAGE CURRENT[mA] 0.5 max (60Hz,by UL and DEN-AN)
OUTPUT
VOLTAGE[V] 5 12 12 5 15 15 5 24 5 3.3 12 5
CURRENT[A]
*2
0 - 3.0(Peak 4.5)0 - 1.2(Peak 2.0)
0 - 0.3(Peak 0.45)
0 - 3.0(Peak 4.5)0 - 1.0(Peak 2.0)
0 - 0.3(Peak 0.45)
0 - 3.0(Peak 4.5)0 - 0.5(Peak 1.3)
0 - 0.5(Peak 0.75)
0 - 4.0(Peak 6.0)0 - 1.2(Peak 2.0)
0 - 0.5(Peak 0.75)
LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max 20max 100max 20max 20max 48max 20max
LOAD REGULATION[mV] 100max 120max 150max 100max 120max 150max 100max 150max 100max 40max 120max 100max
RIPPLE[mVp-p]
0to+50
C
*3
100max 120max 120max 100max 120max 120max 100max 120max 120max 80max 120max 120max
-10-0
C
*3
150max 160max 160max 150max 160max 160max 150max 160max 160max 140max 160max 160max
RIPPLE NOISE[mVp-p]
0to+50
C
*3
120max 150max 150max 120max 150max 150max 120max 150max 150max 120max 150max 150max
-10-0
C
*3
170max 180max 180max 170max 180max 180max 170max 180max 180max 160max 180max 180max
TEMPERATURE REGULATION[mV]
0to+50
C
50max 350max 350max 50max 350max 350max 50max 480max 350max 50max 350max 350max
-10 to +50C
60max 420max 420max 60max 420max 420max 60max 580max 420max 60max 420max 420max
DRIFT[mV]
*4
20max xx xx 20max xx xx 20max xx xx 20max xx xx
START-UP TIME[ms] 100max (ACIN 85V,Io=100%)
HOLD-UP TIME[ms] 10typ (ACIN 85V,Io=100%),20typ (ACIN 100V,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
*5
Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed
3.00 - 3.60
Fixed Fixed
OUTPUT VOLTAGE SETTING[V]
4.9 to 5.3
11.4 to 12.6 11.4 to 12.6
4.9 to 5.3
14.25 to 15.75 14.25 to 15.75
4.9 to 5.3
22.8 to 25.2 4.75 to 5.25
xx
11.4 to 12.6 4.75 to 5.25
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION
Works at 115 - 140% of rating (V1 only)
OPERATING INDICATION Not provided
REMOTE SENSING Not provided
REMOTE ON/OFF Not provided
ISOLATION
INPUT-OUTPUT AC2,000V 1minute,Cutoff current = 10mA,DC500V 50MWmin (At Room Temperature)
INPUT-FG AC2,000V 1minute,Cutoff current = 10mA,DC500V 50MWmin (At Room Temperature)
OUTPUT-FG AC500V 1minute,Cutoff current = 100mA,DC500V 50MWmin (At Room Temperature)
OUTPUT-OUTPUT(V1,V2,V3)
AC100V 1minute,Cutoff current = 100mA,DC100V 10MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-10 to +60C,20 - 90%RH (Non condensing), 3,000m (10,000feet)
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing), 9,000m (30,000feet)
VIBRATION 10 - 55Hz,19.6m/s2(2G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,C-UL Complies with DEN-AN (At only AC input)
CONDUCTED NOISE Complies with FCC-B,VCCI-B
OTHERS CASE SIZE/WEIGHT
COOLING METHOD Convection
65X26X120mm (WXHXD)/ 170g max
*1Because V2 - V3 is isolated,V3 can be as used -VOUT.
*2Peak load for 10sec. or less is acceptable if the peak total wattage is less than the rated
wattage(-1: 33W, -2: 34.5W, -3: 34.5W, -4: 34.5W).When the load of V1 is 0A, other output
can be drawn by 80% of rated current.
*3Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-
GIKEN:RM101).
*4Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C
with the input voltage held constant at the rated input/output.
*5Adjustment of output voltage for V1 (+5V+5%) is possible (Optional).
Please refer to 2.5 minimum output current and 4.2 derating.
*6Please contact us about safety approvals for the model with option.
*Avoid prolonged use under over-load.
LCC30A
AC-DC Power Supplies Open Frame/Enclosed type
LC C 30 A -1 -O
Ordering information
1Series name
2Multiple output
3Output wattage
4100/120V input
5Output voltage combina-
tion
6Optional *6
A :G2 - V3 Common
C :with Coating
G :Low leakage current
Y :with Potentiometer
R
123456
LCC
LCC-2
¡DERATING CURVE
¡OVERCURRENT CHARACTERISTICS (LCC30A-1)
¡RISE TIME & FALL TIME (LCC30A-1)
¡STATIC CHARACTERISTICS (LCC30A-1)
40
10
0
OUTPUT VOLTAGE
Io=100%
RIPPLE
50 60 70 80 90 100 110 120 130
20
30
40
50
60
12V(V3)
5V(V1)
13.00
12.00
11.00
10.00
9.00
8.00
5.20
5.00
4.80
4.60
4.40
4.20
12V(V3)
5V(V1)
12V(V2)
12V(V2)
20ms/DIV
AC Input
ACIN 100V Io=100%
12V(V2)
12V(V3)
5V(V1)
DC
Output
0
14.00
12.00
10.00
8.00
6.00
4.00
6.00
5.00
4.00
3.00
2.00
1.00
12V(V2) 5V(V1)
12V(V3)
OUTPUT VOLTAGE V
INPUT VOLTAGE 60Hz
V
RIPPLE mVp-p
OUTPUT VOLTAGE V
OUTPUT CURRENT A
12345678
LCC
LCC-3
LCC30A
External view
4
65
57
±
0.5
CN1
5
3
1
1
6
FG
AC(N)
AC(L)
t=1.6
23
3max
120
112
±
0.5
4- 3.5
CN2
G3(V3)
V3
G2(V2)
V2
G1(V1)
V1
4
<PIN CONNECTION>
CN1 CN2
Mounting Hole
Name Plate
PCB
(Lead)
I /O Connector
Mating Connector
CN1 B3P5-VH VHR-5N Chain:SVH-21T-P1.1
Loose:BVH-21T-P1.1
CN2 B6P-VH VHR-6N
(Mft:J.S.T.)
Terminal
Chain:SVH-21T-P1.1
Loose:BVH-21T-P1.1
Pin No Input
1AC(L)
2
3AC(N)
4
5FG
Pin No
1
2
3
4
5
6
Input
G3
V3
G2
V2
G1
V1
¶Tolerance : ±1
¶PCB Material : Glass composite
(CEM3)
¶Dimensions in mm
¶Weight : 170g or less
¶All output isolated
¶Mounting torque : 0.6N
·m(6.3kgf·cm)max
º
(62.5)
(9)
Voltage adjust(V1)
(LCC30A-4 or optional)
Performance data
