Ordering information AC-DC Power Supplies Open Frame/Enclosed type LCC30A LC 1 C 2 30 A 3 -1 4 5 -O 6 1Series name 2Multiple output 3Output wattage 4100/120V input 5Output voltage combination 6Optional *6 A :G2 - V3 Common C :with Coating G :Low leakage current Y :with Potentiometer R MODEL V1 V2 V3 DC OUTPUT *1 LCC30A-1 5V 3.0(Peak 4.5)A 12V 1.2(Peak 2.0)A 12V 0.3(Peak 0.45)A LCC30A-2 5V 3.0(Peak 4.5)A 15V 1.0(Peak 2.0)A 15V 0.3(Peak 0.45)A LCC30A-3 5V 3.0(Peak 4.5)A 24V 0.5(Peak 1.3)A 5V 0.5(Peak 0.75)A LCC30A-4 3.3V 4.0(Peak 6.0)A 12V 1.2(Peak 2.0)A 5V 0.5(Peak 0.75)A SPECIFICATIONS INPUT LCC OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V INRUSH CURRENT[A] ACIN 100V LEAKAGE CURRENT[mA] VOLTAGE[V] *2 CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *3 RIPPLE[mVp-p] -10 - 0C *3 0 to +50C *3 RIPPLE NOISE[mVp-p] -10 - 0C *3 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *4 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] *5 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG OUTPUT-FG OUTPUT-OUTPUT(V1,V2,V3) OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE CASE SIZE/WEIGHT COOLING METHOD LCC30A-1 LCC30A-2 LCC30A-3 AC85 - 132 1f or DC110 - 170 0.8typ (Io=100%) 47 - 440 or DC 72typ (Io=100%) 25typ (Io=100%) (At cold start) 0.5 max (60Hz, by UL and DEN-AN) 5 12 12 5 15 15 5 24 0 - 3.0(Peak 4.5) 0 - 1.2(Peak 2.0) 0 - 0.3(Peak 0.45) 0 - 3.0(Peak 4.5) 0 - 1.0(Peak 2.0) 0 - 0.3(Peak 0.45) 0 - 3.0(Peak 4.5) 0 - 0.5(Peak 1.3) 20max 48max 48max 20max 60max 60max 20max 100max 100max 120max 150max 100max 120max 150max 100max 150max 100max 120max 120max 100max 120max 120max 100max 120max 150max 160max 160max 150max 160max 160max 150max 160max 120max 150max 150max 120max 150max 150max 120max 150max 170max 180max 180max 170max 180max 180max 170max 180max 50max 350max 350max 50max 350max 350max 50max 480max 60max 420max 420max 60max 420max 420max 60max 580max 20max xx 20max xx 20max xx xx xx 100max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%) , 20typ (ACIN 100V, Io=100%) Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed 4.9 to 5.3 11.4 to 12.6 11.4 to 12.6 4.9 to 5.3 14.25 to 15.75 14.25 to 15.75 4.9 to 5.3 22.8 to 25.2 Works over 105% of rating and recovers automatically Works at 115 - 140% of rating (V1 only) 67typ (Io=100%) 5 0 - 0.5(Peak 0.75) 20max 100max 120max 160max 150max 180max 350max 420max xx 3.3 0 - 4.0(Peak 6.0) 20max 40max 80max 140max 120max 160max 50max 60max 20max 12 0 - 1.2(Peak 2.0) 48max 120max 120max 160max 150max 180max 350max 420max 5 0 - 0.5(Peak 0.75) 20max 100max 120max 160max 150max 180max 350max 420max xx xx Fixed 3.00 - 3.60 Fixed Fixed 4.75 to 5.25 xx 11.4 to 12.6 4.75 to 5.25 Not provided Not provided Not provided AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing), 3,000m (10,000feet) -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with DEN-AN (At only AC input) Complies with FCC-B, VCCI-B 65X26X120mm (WXHXD) / 170g max Convection *1 Because V2 - V3 is isolated,V3 can be as used -VOUT. *2 Peak load for 10sec. or less is acceptable if the peak total wattage is less than the rated wattage(-1: 33W, -2: 34.5W, -3: 34.5W, -4: 34.5W).When the load of V1 is 0A, other output can be drawn by 80% of rated current. *3 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKUGIKEN:RM101). LCC-2 LCC30A-4 *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output. *5 Adjustment of output voltage for V1 (+5V+5%) is possible (Optional). Please refer to 2.5 minimum output current and 4.2 derating. *6 Please contact us about safety approvals for the model with option. * Avoid prolonged use under over-load. LCC30A External view 4- 3.5 Mounting Hole CN2 G3(V3) 1 V3 G2(V2) Voltage adjust(V1) V2 G1(V1) 6 V1 CN1 5 FG 3 AC(N) 57 0.5 65 Name Plate AC(L) 4 VHR-5N CN2 B6P-VH VHR-6N Terminal Chain:SVH-21T-P1.1 Loose:BVH-21T-P1.1 Chain:SVH-21T-P1.1 Loose:BVH-21T-P1.1 <PIN CONNECTION> (LCC30A-4 or optional) CN1 Pin No 1 2 3 4 5 (62.5) 112 0.5 120 CN2 Input AC(L) AC(N) FG Pin No 1 2 3 4 5 6 Input G3 V3 G2 V2 G1 V1 3 max (Lead) 23 4 Mating Connector (Mft:J.S.T.) (9) 1 I /O Connector CN1 B3P5-VH PCB t=1.6 Tolerance : 1 Weight : 170g or less PCB Material : Glass composite(CEM3) Dimensions in mm Mounting torque : 0.6N*m(6.3kgf*cm)max All output isolated Performance data STATIC CHARACTERISTICS (LCC30A-1) RISE TIME & FALL TIME (LCC30A-1) 5.20 12.00 5.00 11.00 4.80 10.00 4.60 9.00 4.40 8.00 60 OUTPUT VOLTAGE 12V(V3) 5V(V1) 12V(V2) 40 Io=100% 30 20 RIPPLE 4.20 0 40 50 60 70 80 90 5V(V1) 12V(V3) 12V(V2) DC Output 50 RIPPLE mVp-p OUTPUT VOLTAGE V LCC 13.00 12V(V3) 12V(V2) 5V(V1) AC Input ACIN 100V Io=100% 10 100 110 120 130 20ms/DIV INPUT VOLTAGE V 60Hz OVERCURRENT CHARACTERISTICS (LCC30A-1) DERATING CURVE 14.00 6.00 OUTPUT VOLTAGE V 12V(V2) 5V(V1) 12.00 5.00 12V(V3) 10.00 4.00 8.00 3.00 6.00 2.00 4.00 1.00 0 1 2 3 4 5 6 7 8 OUTPUT CURRENT A LCC-3