& *R AE oH C- S C Q2 O 00 MP QU LI AL ANT IF IE D Features Applications Compliant with AEC-Q200 Rev-C- Stress Protection of automotive circuitry Test Qualification for Passive Components in Automotive Applications Operating temperature range up to 125 C Low thermal derating factor Higher hold currents at elevated temperature RoHS compliant* including engine control modules Overcurrent surge protection of electronic equipment required to operate at high operating temperature ranges Resettable fault protection of general electronic equipment MF-PSHT Series - PTC Resettable Fuses Electrical Characteristics Ihold Model V max. Volts I max. Amps MF-PSHT010X 16 40 Itrip Amperes at 23 C Hold Trip 0.10 0.60 Max. Time To Trip Resistance Ohms at 23 C RMin. R1Max.** 1.0 12.0 Amperes at 23 C Seconds at 23 C 2.5 1.5 Tripped Power Dissipation Watts at 23 C Typ. 1.0 **R1Max. measured 24 hours post reflow. Maximum resistance after two solder reflow cycles. Environmental Characteristics Operating Temperature......................................... -40 C to +125 C Maximum Device Surface Temperature in Tripped State .................................................... +125 C Passive Aging ....................................................... +125 C, 1000 hours............................................. Rfinal <R1max. Humidity Aging...................................................... +85 C, 85 % R.H. 1000 hours ............................. Rfinal <R1max. Thermal Shock ..................................................... +125 C to -40 C, 20 times .................................. Rfinal <R1max. Solvent Resistance ............................................... MIL-STD-202, Method 215 ................................... No change Vibration ............................................................... MIL-STD-883C, Method 2007.1,........................... No change Condition A Test Procedures And Requirements For Model MF-PSHT Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description Resistance ............................................................ In still air @ 23 C ................................................. Rmin R R1max Time to Trip ........................................................... At specified current, Vmax, 23 C ......................... T max. time to trip (seconds) Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning Trip Endurance ..................................................... Vmax, 48 hours..................................................... No arcing or burning Solderability .......................................................... ANSI/J-STD-002 ................................................... 95 % min. coverage Thermal Derating Chart - Ihold (Amps) Model MF-PSHT010X -40 C 0.15 -20 C 0.13 0 C 0.115 Ambient Operating Temperature +23 C +40 C +50 C +60 C 0.10 0.09 0.084 0.078 +70 C 0.072 +85 C 0.063 +125 C 0.04 Asia-Pacific: Tel: +886-2 2562-4117 * Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 * Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 * Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. MF-PSHT Series - PTC Resettable Fuses Product Dimensions A Model Min. 2.00 (0.079) MF-PSHT010X B Max. 2.30 (0.091) Min. 1.20 (0.047) C Max. 1.50 (0.059) Min. 0.40 (0.016) Packaging: 3000 pcs. per reel. Top View D Min. 0.25 (0.010) Max. 0.80 (0.031) DIMENSIONS: Bottom View Side View F Terminal material: Nickel/gold plated. Recommended Pad Layout A MM (INCHES) C 1.50 0.10 (.059 .004) B Termination pad solderability: Standard Au finish: Meets ANSI/J-STD-002 Category 2. Recommended Storage: 40 C max./70 % RH max. D 1.00 0.05 (.039 .002) 1.20 0.10 (.047 .004) Typical Time to Trip at 23 C How to Order MF - PSHT 010 X - 2 Time to Trip (Seconds) 100 Multifuse(R) Product Designator Series PSHT = 0805 High Temperature Surface Mount Component Hold Current, Ihold 010 (0.10 Amps) Multifuse(R) freeXpansionTM Design Packaging Packaged per EIA 481-1 -2 = Tape and Reel 10 1 MF-PSHT010X 0.1 Typical Part Marking 0.01 Represents total content. Layout may vary. PART IDENTIFICATION: MF-PSHT010X = F 0.001 0.1 1 10 Current (Amps) F BIWEEKLY DATE CODE WILL APPEAR ON THE PACKAGING LABEL: WEEK 1 AND 2 = A WEEK 51 AND 52 = Z The Time to Trip curves represent typical performance of a device in a simulated application environment. Actual performance in specific customer applications may differ from these values due to the influence of other variables. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. MF-PSHT Series - PTC Resettable Fuses Solder Reflow Recommendations 300 Preheating Soldering Cooling Notes: * MF-PSHT models cannot be wave soldered. Please contact Bourns for hand soldering recommendations. 200 * If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. 150 * Compatible with Pb and Pb-free solder reflow profiles. * Excess solder may cause a short circuit, especially during hand soldering. Please refer to the Multifuse(R) Polymer PTC Soldering Recommendation guidelines. Temperature (C) 250 100 50 0 160-220 10-20 120 Time (seconds) MF-PSHT SERIES, REV. C 04/23/15 "freeXpansion Design" is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. MF-PSHT Series Tape and Reel Specifications MF-PSHT010X per EIA 481-1 8.0 0.30 (0.315 0.012) 4.0 0.10 (0.157 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 1.65 0.10 (0.065 0.004) 2.40 0.10 (0.094 0.004) 4.35 (0.171) 1.5 + 0.10/-0.0 (0.059 + 0.004/-0) 3.5 0.05 (0.138 0.002) 1.75 0.10 (0.069 0.004) 6.25 (0.246) 0.6 (0.024) 0.1 (0.004) 0.95 0.10 (0.037 0.004) 390 (15.35) 160 (6.30) Tape Dimensions W P0 P1 P2 A0 B0 B1 max. D0 F E1 E2 min. T max. T1 max. K0 Leader min. Trailer min. Reel Dimensions 185 (7.28) 50 (1.97) 8.4 + 1.5/-0.0 (0.331 + 0.059/-0.0) 14.4 (0.567) A max. N min. W1 W2 max. DIMENSIONS: P0 T D0 P2 E1 MM (INCHES) W2(MEASURED AT HUB) COVER TAPE F E2 W B1 A N(HUB DIA.) B0 K0 T1 P1 A0 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. W1(MEASURED AT HUB) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: MF-PSHT010X-2