Data Sheet
Part Number 856534
810 MHz SAW Filter
Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 1 of 5
Features
• For WiMAX applications
• Usable bandwidth 5 MHz
• High attenuation
• No impedance matching required for operation
at 50 Ω
• Single-ended operation
• Ceramic Surface Mount Package (SMP)
• Hermetic
• RoHS compliant (2002/95/EC), Pb-free
•
Package Pin Configuration
Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View
SMP-12
654
321
Single-ended Configuration
Pin No. Description
2 Input
5 Output
1,3,4,6 Case ground
0.69
1.22 NOM.
1.32 MAX.
0.75
0.60
1.50
0.75
3.00
3.00
Dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall
length and width ±0.10mm
Body: Al
2
O
3
ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0µm,
over a 2 - 6µm Ni plating
Pb
Data Sheet
Part Number 856534
810 MHz SAW Filter
Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 2 of 5
Electrical Specifications (1)
Operating Temperature Range:
(2)
-40 to +85
o
C
Parameter
(3)
Minimum Typical
(4)
Maximum Unit
Center Frequency - 810 - MHz
Maximum Insertion Loss
807.5 - 812.5 MHz
-
4.6
6.0
dB
Amplitude Ripple
(5)
807.5 - 812.5 MHz
-
0.7
2.0
dB
Group Delay Variation
807.5 - 812.5 MHz
-
88
150
ns
Absolute Attenuation
10 - 770 MHz
770 - 793 MHz
793 - 795 MHz
795 - 797 MHz
823 - 825 MHz
825 - 827 MHz
827 - 850 MHz
850 - 1500 MHz
1500 - 2500 MHz
50
30
20
10
10
20
30
50
35
54
48
41
32
32
41
48
54
38
-
-
-
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
dB
dB
dB
Source Impedance
(6)
- 50 - Ω
Load Impedance
(6)
- 50 - Ω
Notes:
1. All specifications are based on the TriQuint test circuit shown below
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Amplitude ripple is defined as the worst case difference between the peak and adjacent valley within the defined frequency points
6. This is the optimum impedance in order to achieve the performance shown
Test Circuit:
50 Ω
Single-ended
No impedance matching
required
1,3,4,6
25
50 50
Ω
ΩΩ
ΩΩ
ΩΩ
Ω
50 Ω
Single-ended
No impedance matching
required
Data Sheet
Part Number 856534
810 MHz SAW Filter
Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 3 of 5
Typical Performance (at room temperature)
Data Sheet
Part Number 856534
810 MHz SAW Filter
Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 4 of 5
Matching Schematics
50 Ω
Single-ended
No impedance
matching required
1,3,4,6
25
50 50
Ω
ΩΩ
ΩΩ
ΩΩ
Ω
50 Ω
Single-ended
No impedance matching
required
Marking PCB Footprint
CJ
code
Marking
Date code
JJJYM
logo
ID dot
Sawtek
.96
3.20 SQ
1.27
.38 .81
1.70
The date code consists of: JJJ = Julian day,
Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only
Dimensions shown are nominal in millimeters
Tape and Reel
3.25
Section A-A
1.75
Ø1.5
4.0 A
12.0
5.5
Ø1.5
4.0
2.0
3.25
1.4
0.21
A
Ø102 Ø20.2
Ø13.0 2.0 Direction of travel
Ø330
12.8
2.7 logo
Sawtek
ID dot
Dimensions shown are nominal in millimeters
Packaging quantity: 5000 units/reel
Data Sheet
Part Number 856534
810 MHz SAW Filter
Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 5 of 5
Maximum Ratings
Parameter Symbol Minimum Maximum Unit
Operating Temperature Range T -40 +85
o
C
Storage Temperature Range T
stg
-40 +85
o
C
Important Notes
Warnings
• Electrostatic Sensitive Device (ESD)
• Avoid ultrasonic exposure
RoHS Compliance
• This product complies with EU directive 2002/95/EC (RoHS)
Solderability
• Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature
(see soldering profile)
Links to Additional Technical Information
PCB Layout Tips Qualification Flowchart Soldering Profile
S-Parameters RoHS Information Other Technical Information
TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability
for applications, processes, circuits or assemblies, which are implemented using any TriQuint compone
nt described in this data sheet.
Contact Information
PO Box 609501
Orlando, FL 32860-9501
USA
Phone: +1 (407) 886-8860
Fax: +1 (407) 886-7061
Email: info-product@tqs.com
Web: www.triquint.com
Or contact one of our worldwide
Network of sales offices,
Representatives or distributors
Pb
