Part Number 856534 810 MHz SAW Filter Data Sheet Features * * * * * * * * * For WiMAX applications Usable bandwidth 5 MHz High attenuation No impedance matching required for operation at 50 Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View SMP-12 1 2 3 6 5 4 1.22 NOM. 1.32 MAX. 0.69 3.00 0.75 Single-ended Configuration 1.50 Pin No. 2 5 1,3,4,6 3.00 0.75 Description Input Output Case ground 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 1 of 5 Part Number 856534 810 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical (4) Maximum Unit - 810 - MHz - 4.6 6.0 dB - 0.7 2.0 dB - 88 150 ns 50 30 20 10 10 20 30 50 35 - 54 48 41 32 32 41 48 54 38 50 50 - dB dB dB dB dB dB dB dB dB Center Frequency Maximum Insertion Loss 807.5 - 812.5 MHz Amplitude Ripple (5) 807.5 - 812.5 MHz Group Delay Variation 807.5 - 812.5 MHz Absolute Attenuation 10 - 770 MHz 770 - 793 MHz 793 - 795 MHz 795 - 797 MHz 823 - 825 MHz 825 - 827 MHz 827 - 850 MHz 850 - 1500 MHz 1500 - 2500 MHz Source Impedance (6) Load Impedance (6) Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the TriQuint test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Typical values are based on average measurements at room temperature Amplitude ripple is defined as the worst case difference between the peak and adjacent valley within the defined frequency points This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Single-ended No impedance matching required Subject to change or obsolescence without notice 2 50 5 1,3,4,6 Rev A 50 50 Single-ended No impedance matching required 06/08 TriQuint Semiconductor, Inc. Page 2 of 5 Part Number 856534 810 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 3 of 5 Part Number 856534 810 MHz SAW Filter Data Sheet Matching Schematics 2 50 Single-ended No impedance matching required 50 5 50 Single-ended No impedance matching required 50 1,3,4,6 Marking PCB Footprint 3.20 SQ Sawtek logo .96 Marking code CJ 1.70 JJJYM 1.27 .81 ID dot .38 Date code The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 4.0 Sawtek logo O330 0.21 2.0 O1.5 A 1.75 5.5 ID dot O102 O20.2 O13.0 2.0 12.0 3.25 Direction of travel 1.4 3.25 4.0 A O1.5 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev A 06/08 TriQuint Semiconductor, Inc. Page 4 of 5 Part Number 856534 810 MHz SAW Filter Data Sheet Maximum Ratings Parameter Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Operating Temperature Range Storage Temperature Range Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * Pb This product complies with EU directive 2002/95/EC (RoHS) Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev A Or contact one of our worldwide Network of sales offices, Representatives or distributors 06/08 TriQuint Semiconductor, Inc. Page 5 of 5