D-Sub GS Series
Rectangular I/O Connectors
•NFC-UTE C 93-425
•According to MIL-C-24308
•Layouts: 9, 15, 25, 37 and 50
•High reliability
•More than 5000 mating and unmating cycles
•Contact resistance: 5 m max.
•Solder and removable crimp contacts
Technical Characteristics
343
APRIL 2005
MATERIAL
Shell Plated steel
Insulator PBT (15%) UL 94 V0
Pin & socket body Brass
Socket wires Copper alloy
Plastic hood ABS, UL 94 VO
Metallized plastic hood Metallized ABS, UL 94 VO
Metallized hood Aluminium alloy
PLATING
Terminations and contact areas Au/Ni
Shell GS: tinned shell
GSD: zinc yellow-chromate plated shell
ELECTRICAL CHARACTERISTICS
Working Voltage 300 VAC
Current rating 7.5 A
Dielectric withstanding voltage 1000 Vrms
Electrical continuity (shell to shell)* 2 mhtypical
Contact resistance 5 mhmax
(standard value 8 mhmax)
Insulation resistance 5.103Mhmax
* Only for tin plated shells with dimples
GENERAL CHARACTERISTICS
Housing
Number of contacts
Pitch between contacts 2.77 mm (25, 37 & 50 contacts)
Pitch between rows 2.84 mm
Crimp termination AWG 26-28 (0.093 to 0.14 mm2)
ENVIRONMENTAL CHARACTERISTICS
Temperature range -55 °C, + 125 °C
Dry heat 1000h at +125 °C
Salt spray GS series : 48h GSD series : 500h
Damped heat 56 days (40 °C, relative humidity: 90-95 %)
MECHANICAL CHARACTERISTICS
Contact retention 40N min (max displacement: 0.3 mm)
Mating and unmating cycles 5000
Vibrations and shocks no discontinuity 20 ns
• Sinusoidal vibrations 10/2000 Hz, 1.5 mm, 20g
• Shocks 50 g
INSULATOR RETENTION IN HOUSING
Housing
Number of contacts
Min retention
EABCD
9 15253750
53N 80N 124N 180N 233N
EABCD
9 15253750
S009 13 10 110
G -
The other accessories are sold separately
Sealed connectors: consult us.
D
SERIES
MODEL
SHELL TYPE
- tin plated shell*
(salt spray 48h)
zinc yellow chromate plated shell**
(salt spray 500h)
LAYOUT
009 015 025 037 050
PART – POLARITY – PLATING
13 male plug, gold plated terminations
17 male plug, pretinned terminations
22 female receptacle, gold plated terminations
26 female receptacle, pretinned terminations
TERMINATIONS
10 right angle termination CI
20 crimp contacts AWG 20 to 24
22 crimp contacts AWG 26 to 28
30 straight termination
MOUNTING
110 mounting for D Sub 90° (M3-6G)
150 float mounting
111 right angle D Sub mounting (4-40 UNC)
* male plug with dimples
** male plug without dimples
D-Sub GS Series
Ordering Information
344 APRIL 2005
Part Number No. of contacts Dimensions (mm)
ABCDEHJ
± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2
GS-009..10… 9 30.7 16.9 25 8.4 12.3 19.3 10.8
GS-015..10… 15 39.1 25.2 33.3 8.4 12.3 27.5 10.8
GS-025..10… 25 52.9 38.9 47.05 8.4 12.3 41.3 10.8
GS-037..10… 37 69.3 55.4 63.5 8.4 12.3 57.7 10.8
GS-050..10… 50 66.7 52.8 61.1 11.2 15.3 55.3 13.6
D-Sub GS Series
Dimensions: 90° PC tail plugs
Pin ø 1.02
345
APRIL 2005
Dimensions are in mm
Part Number No. of contacts Dimensions (mm)
ABCDEHJ
± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2
GS-009..10… 9 30.7 16.2 25 7.8 12.3 19.3 10.8
GS-015..10… 15 39.1 24.7 33.3 7.8 12.3 27.5 10.8
GS-025..10… 25 52.9 38.4 47.05 7.8 12.3 41.3 10.8
GS-037..10… 37 69.3 54.7 63.5 7.8 12.3 57.7 10.8
GS-050..10… 50 66.7 52.3 61.1 10.8 15.3 55.3 13.6
D-Sub GS Series
Dimensions: 90° PC tail receptacles
Socket ø 1.02
346 APRIL 2005
Dimensions are in mm
Part Number No. of contacts Dimensions (mm)
ABCDEHJ
± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2
GS-009..30… 9 30.7 16.9 25 8.4 12.3 19.3 10.8
GS-015..30… 15 39.1 25.2 33.3 8.4 12.3 27.5 10.8
GS-025..30… 25 52.9 38.9 47.05 8.4 12.3 41.3 10.8
GS-037..30… 37 69.3 55.4 63.5 8.4 12.3 57.7 10.8
GS-050..30… 50 66.7 52.8 61.1 11.2 15.3 55.3 13.6
Dimensions: straight PC tail plugs
Pin ø 1.02
D-Sub GS Series
347
APRIL 2005
Dimensions are in mm
Part Number No. of contacts Dimensions (mm)
ABCDEHJ
± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2
GS-009..30… 9 30.7 16.2 25 7.8 12.3 19.3 10.8
GS-015..30… 15 39.1 24.7 33.3 7.8 12.3 27.5 10.8
GS-025..30… 25 52.9 38.4 47.05 7.8 12.3 41.3 10.8
GS-037..30… 37 69.3 54.7 63.5 7.8 12.3 57.7 10.8
GS-050..30… 50 66.7 52.3 61.1 10.8 15.3 55.3 13.6
D-Sub GS Series
Dimensions: straight PC tail receptacles
Socket ø 1.02
348 APRIL 2005
Dimensions are in mm
D-Sub GS Series
Dimensions: crimp terminations
Pin ø 1.02
349
APRIL 2005
Dimensions are in mm
2 holes ø 3.05
Part Number No. of contacts Dimensions (mm)
ABCDEHJ
± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2
GS-009..20… 9 30.8 16.8 25 8.3 12.5 19.3 10.8
GS-009..22… 9 30.8 16.8 25 8.3 12.5 19.3 10.8
GS-015..20… 15 39.1 25.1 33.3 8.3 12.5 27.5 10.8
GS-015..22… 15 39.1 25.1 33.3 8.3 12.5 27.5 10.8
GS-025..20… 25 53 38.9 47 8.3 12.5 41.3 10.8
GS-025..22… 25 53 38.9 47 8.3 12.5 41.3 10.8
GS-037..20… 37 69.3 55.3 63.5 8.3 12.5 57.7 10.8
GS-037..22… 37 69.3 55.3 63.5 8.3 12.5 57.7 10.8
GS-050..20… 50 67 52.7 61.1 11 15.4 55.3 13.6
GS-050..22… 50 67 52.7 61.1 11 15.4 55.3 13.6
Part Number No. of contacts Dimensions (mm)
ABCDEHJ
± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.2
GS-009..20… 9 30.8 16.4 25 8 12.5 19.3 10.8
GS-009..22… 9 30.8 16.4 25 8 12.5 19.3 10.8
GS-015..20… 15 39.1 24.7 33.3 8 12.5 27.5 10.8
GS-015..22… 15 39.1 24.7 33.3 8 12.5 27.5 10.8
GS-025..20… 25 53 38.5 47 8 12.5 41.3 10.8
GS-025..22… 25 53 38.5 47 8 12.5 41.3 10.8
GS-037..20… 37 69.3 54.9 63.5 8 12.5 57.7 10.8
GS-037..22… 37 69.3 54.9 63.5 8 12.5 57.7 10.8
GS-050..20… 50 67 52.5 61.1 10.8 15.4 55.3 13.6
GS-050..22… 50 67 52.5 61.1 10.8 15.4 55.3 13.6
2 holes ø 3.05
D-Sub GS Series
Dimensions: crimp terminations receptacles
Socket ø 1.02
350 APRIL 2005
Dimensions are in mm
D-Sub GS Series
Dimensions: crimp termination contacts
351
APRIL 2005
Dimensions are in mm
Ref. 0100 901-20-OG* Ref. 0100 902-20-G2*
Ref. 0100 931-22-OG* Ref. 0100 932-22-G2*
Pins Socket
ø 1.02, AWG 24 to 20
Pins Socket
ø 1.02, AWG 28 to 26
Lateral play: 0.9 Max
Axial play: 0.4 Max
Ref. GS- --- -- -- 150
Bracket and screw for D SUB 90° - 9 to 37
Ref. GS- --- -- -- 110
Bracket and female screw lock for D SUB 90° - 9 to 37
Ref. GS- --- -- -- 111
D-Sub GS Series
Mounting
Float Mounting
352 APRIL 2005
Dimensions are in mm
Part Number Dimensions (mm)
AB
GS-009 304 38 31
GS-015 304 35 39.5
GS-025 304 43 53
D-Sub GS Series
Hoods with screw locks
353
APRIL 2005
Part Number Dimensions (mm) Ø Cable
ABC
GS-009 300 31 31.5 15.2 8.5
GS-015 300 35 40 15.2 8.5
GS-025 300 38 53.5 15.2 11
GS-037 300 40 70 15.2 11
GS-050 300 40 67.5 18.2 12
Plastic, 38mm screws
Part Number Dimensions (mm) Ø Cable
ABC
GS-009 301 31 31.5 15.2 8.5
GS-015 301 35 40 15.2 8.5
GS-025 301 38 53.5 15.2 11
GS-037 301 40 70 15.2 11
GS-050 301 40 67.5 18.2 12
Plastic 18mm screws
Part Number Dimensions (mm) Ø Cable
ABC
GS-009 302 31 31.5 15.2 8.5
GS-015 302 35 40 15.2 8.5
GS-025 302 38 53.5 15.2 11
GS-037 302 40 70 15.2 11
GS-050 302 40 67.5 18.2 12
Metallized plastic 38mm screws
Part Number Dimensions (mm) Ø Cable
ABC
GS-009 303 31 31.5 15.2 8.5
GS-015 303 35 40 15.2 8.5
GS-025 303 38 53.5 15.2 11
GS-037 303 40 70 15.2 11
GS-050 303 40 67.5 18.2 12
Metallized plastic 18mm screws
Part Number Dimensions (mm)
A
GS-009 305 31
GS-015 305 39.3
GS-025 305 53
Diecast hood with side cable output and screw locks
Diecast hood with screw locks
Crimp flange
Part Number Dimensions (mm)
Ø D3 Ø D4
GS-060 307 6 7
GS-065 307 6.5 7.5
GS-075 307 7.5 8.5
GS-080 307 8 9
GS-100 307 10 11
GS-105 307 10.5 11.5
GS-110 307 11 12
GS-115 307 11.5 12.5
GS-120 307 12 13
GS-140 307 14 15
Blind plug for diecast hood
Part Number Number of contacts
GS-937 308 9 to 37
GS-050 308 50
Part Number Dimensions (mm)
Ø D1 Ø D2
GS-030 306 3 4
GS-035 306 3.5 4.5
GS-045 306 4.5 5.5
GS-050 306 5 6
GS-060 306 6 7
GS-070 306 7 8
GS-076 306 7.6 8.6
GS-080 306 8 9
GS-090 306 9 10
Crimp sleeve
D-Sub GS Series
Accessories
354 APRIL 2005
D-Sub GS Series
Accessories
355
APRIL 2005
Crimp tool Locating plug
Contact extraction tool
Ref. M 22520/201
Dust caps
Ref. M 22520/208
Ref. S-090
Male screw lockwithout hood
Part Number Number of female contacts
GS-009-311 9
GS-015-311 15
GS-025-311 25
GS-037-311 37
GS-050-311 50
Part Number Number of male contacts
GS-009-312 9
GS-015-312 15
GS-025-312 25
GS-037-312 37
GS-050-312 50
YELLOW-CHROMATE FINISH
Part Number Dimensions (mm)
GS-002 120 10
GS-002 121 11
GS-002 122 13.2
GS-002 123 16
GS-002 124 18.2
GS-002 125 22
TIN PLATED FINISH
Part Number Dimensions (mm)
GS-002 130 10
GS-002 131 11
GS-002 132 13.2
GS-002 133 16
GS-002 134 18.2
GS-002 135 22
Female screw lock
Part Number Number of contacts Dimensions
GS-002 937 115 9 to 37 13,2
GS-002 050 115 50 15,7
CAPTIVE SCREW
D-Sub GS Series
356 APRIL 2005
Dimensions are in mm
Board preparation details for straight or bent terminations
