BCR16PM-12LG Triac Medium Power Use REJ03G1511-0100 Rev.1.00 Feb 14, 2007 Features * * * * * The Product guaranteed maximum junction temperature 150C * Insulated Type * Planar Type * UL Recognized : Yellow Card No. E223904 File No.E80271 IT (RMS) : 16 A VDRM : 600 V IFGTI, IRGTI, IRGT III : 30 mA Viso : 2000V Outline RENESAS Package code: PRSS0003AA-A (Package name: TO-220F ) 2 3 1 1. T1 Terminal 2. T2 Terminal 3. Gate Terminal 1 2 3 Applications AC no junction Switching, light dimmer, electronic blanket, Control of household electrical appliance such as electric fans, solenoid driver, small motor control, and other general purpose control applications Parameter Symbol Repetitive peak off-state voltageNote1 Non-repetitive peak off-state voltageNote1 Rev.1.00 Feb 14, 2007 page 1 of 7 VDRM VDSM Voltage class 12 600 720 Unit V V BCR16PM-12LG Parameter RMS on-state current Symbol IT (RMS) Ratings 16 Unit A Surge on-state current ITSM 160 A I2 t 106.5 A2s PGM PG (AV) VGM IGM Tj Tstg -- Viso 5 0.5 10 2 -40 to +150 -40 to +150 2.0 2000 W W V A C C g V I2t for fusion Peak gate power dissipation Average gate power dissipation Peak gate voltage Peak gate current Junction Temperature Storage temperature Mass Isolation voltage Conditions Commercial frequency, sine full wave 360conduction, Tc = 87C 60Hz sinewave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Ta = 25C, AC 1 minute, T1 * T2 * G terminal to case Notes: 1. Gate open. Electrical Characteristics Parameter Repetitive peak off-state current Symbol IDRM Min. -- Typ. -- Max. 2.0 Unit mA VTM -- -- 1.5 V Tc = 25C, ITM = 25 A, instantaneous measurement On-state voltage Test conditions Tj = 150C, VDRM applied Gate trigger voltageNote2 VFGT VRGT VRGT -- -- -- -- -- -- 1.5 1.5 1.5 V V V Tj = 25C, VD = 6 V, RL = 6 , RG = 330 Gate trigger curentNote2 IFGT IRGT IRGT -- -- -- -- -- -- 30 30 30 mA mA mA Tj = 25C, VD = 6 V, RL = 6 , RG = 330 VGD Rth (j-c) 0.2/0.1 -- -- -- -- 3.5 V C/W Tj = 125C/150C, VD = 1/2 VDRM Junction to caseNote3 (dv/dt)c 10/1 -- -- V/s Tj = 125C/150C Gate non-trigger voltage Thermal resistance Critical-rate of rise of off-state Note4 commutation voltage Notes: 2. Measurement using the gate trigger characteristics measurement circuit. 3. The contact thermal resistance Rth (j-c) in case of greasing is 0.5C/W. 4. Test conditions of the critical-rate of rise of off-state commutation voltage is shown in the table below. Test conditions 1. Junction temperature Tj = 125C/150C 2. Rate of decay of on-state commutating current (di/dt)c = -8.0 A/ms 3. Peak off-state voltage VD = 400 V Rev.1.00 Feb 14, 2007 page 2 of 7 Commutating voltage and current waveforms (inductive load) Supply Voltage Time Main Current (di/dt)c Time Main Voltage (dv/dt)c Time VD BCR16PM-12LG Performance Curves 103 7 5 3 2 Tj = 150C 101 7 5 3 2 Tj = 25C 1.0 1.5 2.0 2.5 3.0 3.5 Gate Trigger Voltage (Tj = tC) x 100 (%) Gate Trigger Voltage (Tj = 25C) 160 140 120 100 80 60 40 20 0 100 4.0 2 3 4 5 7 101 2 3 4 5 7 102 Gate Characteristics (I, II and III) Gate Trigger Current vs. Junction Temperature PG(AV) = 0.5W PGM = 5W 101 7 5 3 VGT = 1.5V 2 IGM = 2A 100 7 5 3 2 Gate Trigger Current (Tj = tC) x 100 (%) Gate Trigger Current (Tj = 25C) Conduction Time (Cycles at 60Hz) 10-1 7 IFGT I, IRGT I, IRGT III VGD = 0.1V 5 1 2 10 2 3 5 7 10 2 3 5 7 103 2 3 5 7 104 103 7 5 4 3 2 Typical Example IRGT III 102 7 5 4 3 2 IFGT I, IRGT I 101 -60 -40 -20 0 20 40 60 80 100 120 140 160 Gate Current (mA) Junction Temperature (C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to case) 103 7 5 4 3 2 Typical Example 102 7 5 4 3 2 101 -60 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) Rev.1.00 180 On-State Voltage (V) 3 2 VGM = 10V Gate Voltage (V) Surge On-State Current (A) 200 102 7 5 3 2 100 0.5 Rated Surge On-State Current Feb 14, 2007 page 3 of 7 Transient Thermal Impedance (C/W) On-State Current (A) Maximum On-State Characteristics 102 4.0 103 104 100 101 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10-1 102 Conduction Time (Cycles at 60Hz) BCR16PM-12LG 103 7 5 3 2 Maximum On-State Power Dissipation 40 No Fins On-State Power Dissipation (W) Transient Thermal Impedance (C/W) Maximum Transient Thermal Impedance Characteristics (Junction to ambient) 102 7 5 3 2 101 7 5 3 2 100 7 5 3 2 10-1 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 20 15 10 5 0 4 6 8 10 12 14 16 18 20 Allowable Ambient Temperature vs. RMS On-State Current 160 120 100 80 60 40 360 Conduction Resistive, inductive loads 0 2 4 6 Ambient Temperature (C) Curves apply regardless of conduction angle 8 10 12 14 16 18 20 140 All fins are black painted aluminum and greased 120 100 80 120 120 t2.3 100 100 t2.3 60 60 t2.3 60 Curves apply regardless of 40 conduction angle Resistive, 20 inductive loads Natural convection 0 0 2 4 6 8 10 12 14 16 18 20 RMS On-State Current (A) RMS On-State Current (A) Allowable Ambient Temperature vs. RMS On-State Current Repetitive Peak Off-State Current vs. Junction Temperature 160 Natural convection No Fins Curves apply regardless of conduction angle Resistive, inductive loads 140 120 100 80 60 40 20 0 2 Allowable Case Temperature vs. RMS On-State Current 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 RMS On-State Current (A) Feb 14, 2007 page 4 of 7 Repetitive Peak Off-State Current (Tj = tC) x 100 (%) Repetitive Peak Off-State Current (Tj = 25C) Case Temperature (C) 25 RMS On-State Current (A) 20 Ambient Temperature (C) 360 Conduction Resistive, inductive loads Conduction Time (Cycles at 60Hz) 140 Rev.1.00 30 0 160 0 35 5 3 Typical Example 2 105 7 5 3 2 104 7 5 3 2 103 7 5 3 2 102 -60 -40 -20 0 20 40 60 80 100 120 140160 Junction Temperature (C) BCR16PM-12LG 103 7 5 4 3 2 Latching Current (mA) Typical Example 102 7 5 4 3 2 101 -60 -40 -20 0 20 40 60 80 100 120 140 160 103 7 5 3 2 Distribution T2+, G- Typical Example 102 7 5 3 2 101 7 5 3 2 T2+, G+ Typical Example T2-, G- 100 -40 0 40 80 120 160 Junction Temperature (C) Breakover Voltage vs. Junction Temperature Breakover Voltage vs. Rate of Rise of Off-State Voltage (Tj=125C) 160 Typical Example 140 120 100 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 Breakover Voltage (dv/dt = xV/s) x 100 (%) Breakover Voltage (dv/dt = 1V/s) Junction Temperature (C) 160 Typical Example Tj = 125C 140 120 III Quadrant 100 80 60 40 I Quadrant 20 0 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 Junction Temperature (C) Rate of Rise of Off-State Voltage (V/s) Breakover Voltage vs. Rate of Rise of Off-State Voltage (Tj=150C) Commutation Characteristics (Tj=125C) 160 Typical Example Tj = 150C 140 120 100 III Quadrant 80 60 40 I Quadrant 20 0 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 Rate of Rise of Off-State Voltage (V/s) Rev.1.00 Latching Current vs. Junction Temperature Feb 14, 2007 page 5 of 7 Critical Rate of Rise of Off-State Commutating Voltage (V/s) Breakover Voltage (dv/dt = xV/s) x 100 (%) Breakover Voltage (dv/dt = 1V/s) Breakover Voltage (Tj = tC) x 100 (%) Breakover Voltage (Tj = 25C) Holding Current (Tj = tC) x 100 (%) Holding Current (Tj = 25C) Holding Current vs. Junction Temperature 102 7 5 3 2 Time Main Voltage Typical Example (dv/dt)c VD Tj = 125C Main Current (di/dt)c IT = 4A IT = 500s Time VD = 200V f = 3Hz 101 7 Minimum 5 Characteristics Value I Quadrant 3 2 100 7 III Quadrant 3 5 7 101 2 3 5 7 102 2 3 Rate of Decay of On-State Commutating Current (A/ms) BCR16PM-12LG Gate Trigger Current vs. Gate Current Pulse Width 102 7 Typical Example Main Voltage (dv/dt)c 5 Tj = 150C Main Current IT = 4A IT 3 = 500s 2 VD = 200V f = 3Hz 101 7 I Quadrant 5 Gate Trigger Current (tw) x 100 (%) Gate Trigger Current (DC) Critical Rate of Rise of Off-State Commutating Voltage (V/s) Commutation Characteristics (Tj=150C) Time VD (di/dt)c Time III Quadrant 3 2 100 7 Minimum Characteristics Value 3 5 7 101 2 3 5 7 102 2 3 Rate of Decay of On-State Commutating Current (A/ms) Typical Example IFGT I IRGT I IRGT III 102 7 5 4 3 2 101 0 10 2 3 4 5 7 101 2 3 4 5 7 102 Gate Current Pulse Width (s) Gate Trigger Characteristics Test Circuits 6 103 7 5 4 3 2 6 Recommended Circuit Values Around The Triac Load C1 A 6V V V 6 A V 330 Test Procedure III Rev.1.00 Feb 14, 2007 330 Test Procedure II Test Procedure I 6V R1 A 6V 330 page 6 of 7 C0 R0 C1 = 0.1 to 0.47F C0 = 0.1F R0 = 100 R1 = 47 to 100 BCR16PM-12LG Package Dimensions JEITA Package Code SC-67 Package Name TO-220F Previous Code RENESAS Code PRSS0003AA-A MASS[Typ.] 2.0g Unit: mm 10.5Max 2.8 17 8.5 5.0 1.2 5.2 3.2 0.2 13.5Min 3.6 1.3Max 0.8 2.54 0.5 2.6 4.5 2.54 Order Code Lead form Standard packing Quantity Standard order code Straight type Vinyl sack 100 Type name Lead form Plastic Magazine (Tube) 50 Type name - Lead forming code Note : Please confirm the specification about the shipping in detail. Rev.1.00 Feb 14, 2007 page 7 of 7 Standard order code example BCR16PM-12LG BCR16PM-12LG-A8 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2007. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.0