Series AM1P-NZ
1 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R11.I 1 of 2 North America only
FEATURES:
Models
Single output
Model Input Voltage
(V) Output Voltage
(V) Output Current
max (mA) Isolation
(VDC) Efficiency
(%)
AM1P-0505S-NZ 4.5-5.5 5 200 1000 78
AM1P-1215S-NZ 10.8-13.2 15 67 1000 79
Input Specifications
Parameters Nominal Typical Maximum Units
Voltage range 5 4.5-5.5 VDC
12 10.8-13.2
Filter Capacitor
Isolation Specifications
Parameters Conditions Typical Rated Units
Tested I/O voltage 60 sec 1000 VDC
Resistance > 1000 MOhm
Capacitance 60 pF
Output Specifications
Parameters Conditions Typical Maximum Units
Voltage accurac y See tolerance graph
Short Circuit protection Momentary (1 sec)
Line voltage regulation For 1.0% Vin ±1.2 % of Vin
Load voltage regulation Load 10 – 100% 10 %
Temperature coefficient ±0.03 %/oC
Ripple & Noise At 20 MHz Bandwidth 75 m Vp-p
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 150 KHz
Operating temperature Without derating -40 to +85 oC
Storage temperature -55 to +125 oC
Case temperature 90 oC
Cooling Free air convection
Humidity 90 %
Case material Plastic UL94-VO
Weight 1.8 g
Dimensions (L x W x H) 0.46 x 0.39x 0.30 inches 11.70 x 9.80 x 7.70 mm
MTBF >1 000 000 hrs(MIL-HDBK -217F, Ground B enign, t=+25oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency approvals CE
Standards IEC60950-1 :2001
RoHS compliant
Operating temperature -40oC to + 85oC
8 Pin DIP Package
Input / Output isolation 1000 VDC
Low ripple and noise
Pin computable with multiple manufacturers
High efficiency up to 79%
UL94-VO Package
Click on Series name for product info on aimtec.com
Series AM1P-NZ
1 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R11.I 2 of 2 North America only
Pin Out Specifications External capacitor
Dimensions Filtering
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
Vin
(VDC)
External
capacitor
(uF)
Vout
(VDC)
External
capacitor
(uF)
5 4.7 5 10
12 2.2 9 4.7
24 1 12 2.2
- - 15 1
Pin Single
1 - V Input
4 +V Input
5 +V Output
6 No pin
7 -V Output
8 No pin
11.70
(0.46)
9.80
(0.39)
0.50
(0.02) 7.62
(0.30)
2.54
(0.10)
7.62
(0.30) Bottom View
7.70
(0.30)
4.10
(0.16)
2.54
(0.10)
0.50
(0.02)
14
5678
