1.6x0.8mm SMD CHIP LED LAMP KP-1608SURC HYPER RED Features Description ! 1.6mmx0.8mm !LOW SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. ! WIDE ! IDEAL The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0019 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 1 OF4 Selection Guide Par t No . Di c e KP-1608SURC Iv (mc d ) @ 20 mA L en s Ty p e HYPER RED( InGaAlP ) WATER CLEAR View in g An g l e Min . Ty p . 21/2 70 150 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25C Sy m b o l Par ameter Dev ic e peak Peak Wavelength Hyper Red D Dominate Wavelength 1/2 Ty p . Max . Un i t s Tes t Co n d itio n s 640 nm IF=20mA Hyper Red 628 nm IF=20mA Spectral Line Halfwidth Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Absolute Maximum Ratings at T)=25C Par ameter Hy p er Red Un i t s Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: KDA0019 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 2 OF4 Hyper Red KP-1608SURC SPEC NO: KDA0019 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 3 OF4 KP-1608SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0019 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 4 OF4