Section P
Fire-Rated Poke-Throughs for Concrete Floors
P-1www.hubbell-wiring.com Wiring Device-Kellems
®
Hubbell SystemOne
Recessed 8 Inch
Hubbell SystemOne
Recessed 4 Inch
Hubbell SystemOne
Recessed 6 Inch
Hubbell SystemOne
4x4 Application
Index
Product Page
Fire-Rated Poke-Throughs (FRPT) Applications .................... P-2
Hubbell SystemOne Recessed Systems .......................... P-4
8 Inch Fittings and Sub-Plates ................................. P-6
6 Inch Fittings and Sub-Plates ................................. P-8
4 Inch Fittings and Sub-Plates ................................ P-10
8 Inch Core Hole, One-Piece Units ............................ P-12
6 Inch Core Hole, One-Piece Units ............................ P-13
4 Inch Core Hole, One-Piece Units ............................ P-14
Hubbell SystemOne FRPT
4 Inch Core Hole .......................................... P-15
4 Inch One-Piece Units ..................................... P-16
4 Inch Through Floor Fittings ................................. P-17
Sub-Plates ............................................... P-18
Configuration Chart ........................................ P-19
2X2 Flush FRPT
3 Inch Core Hole Units ...................................... P-20
Flush Duplex FRPT
3 Inch Core Hole Units ...................................... P-21
Flush Furniture Feed FRPT
3 Inch Core Hole Units ...................................... P-22
Painted Pedestal FRPT
2 and 3 Inch Core Hole Units .................................P-23
Brushed Aluminum Pedestal FRPT
3 Inch Core Hole Two-Piece Units ............................. P-24
Technical Information ......................................... P-25
P-2 Wiring Device-Kellems
®www.hubbell-wiring.com
60/40 6" Sub-Plate Split
An Industry first, the 60/40 sub-plate layout
allows for unmatched capacity with up to
12 keystone jacks and one 20A duplex.
50/50 6" Sub-Plate Split
Two duplexes with ample audio/video and data
are achieved by using the 50/50 sub-plate layout.
Additionally this layout will accommodate two Style
Line® devices for GFCI, surge, etc. applications.
4" Quad Sub-Plate
The quad sub-plate can be wired on one
circuit or two and includes 18 inch of
stranded 12AWG wire.
4" 2X2 Sub-Plate
The 2x2 sub plates are available with Style Line®
or traditional duplex openings and can
accommodate up to two keystone jacks.
High Capacity Multimedia Applications
Sub-plate layout for the center three gangs of the
eight inch FRPT allows for maximum audio visual
capacity. The NEMA spacing allows the product
flexibility to easily accept 3rd party products.
High Capacity Multimedia Applications
Perimeter sub plates for the eight inch FRPT help
compliment the audio visual or data in the center
three gangs. Additionally these plates can be
exchange for other low voltage compatible plates.
Hubbell SystemOne Recessed FRPTs for 6" Core Hole Applications…
Hubbell SystemOne Recessed FRPTs for 4" Core Hole Applications…
Hubbell SystemOne Recessed FRPTs for 8" Core Hole Applications…
Hubbell's SystemOne Recessed Fire-Rated Poke-Throughs (FRPT) enhances functionality providing increased power,
data and audio visual capacity. Safety is improved with recessed connectivity, a low profile flange, and egress doors that
hinge inwards. Building value is enhanced with plated finishes to match and blend with modern building décor.
6 Inch Recessed Access
60/40 split
Sub-Plates
50/50 split
Sub-Plates
4 Inch Recessed Access
Quad Sub-Plate Multi & Single Service
Sub-Plates
8 Inch Recessed Access
Center Sub-Plates
with Outer Sub-plates
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell Fire-Rated Poke-Throughs
Features and Benefits
P-3
Wiring Device-Kellems
®
www.hubbell-wiring.com
Flush Applications
Hubbell offers a variety of single and multi-
service flush fire-rated poke-through products.
It incorporates a Hubbell Style Line®, 20 amp,
duplex receptacle and two Hubbell Category 5e
data jacks. The jacks mount flush to the cover
for an unobtrusive appearance. Various colors
and all brass versions are available.
Pedestal Applications
Hubbell offers single and multi- service pedestal
style FRPTs for those applications requiring
above-the-floor connections. Available in 2-, 4-
or 6-gang sizes, pedestal FRPTs provide more
power and low voltage connections to the
desktop than most flush configurations in
a 3 Inch core hole.
Furniture Feed Applications
Hubbell offers single and multiple service flush
and pedestal style FRPTs that deliver power and
voice/data cabling to feed furniture systems.
Various models can feed up to 2 inch conduit
and can accommodate up to 36 Category 5e
data cables.
Multi-Service Applications
This Hubbell SystemOne sub-plate incorporates
two Style Line® rectangular openings. These
can be used for a variety of power and/or data
applications. It will accommodate 15 or 20 amp,
standard, isolated ground, GFCI or surge
protected receptacles. Using communication
frames it can provide up to a 6-port multi-service
or a 12-port all communication solution.
Multimedia Applications
Other Hubbell SystemOne sub-plates are
designed to meet the growing needs of the
audio and video markets. Some sub-plates
provide power outlets with Hubbell’s audio/
video products including 15-pin SVGA, RCA,
S-Video, 3.5mm stereo, and XLR microphone
jacks. Other sub-plates can accommodate
Extron® Electronics MAAP and AAP series
audio/video modules.
4X4 Applications
Provides maximum power capacity for flush,
multi-service applications. This sub-plate features
a pre-wired four outlet 20A, 125V receptacle and
four openings for Hubbell’s Snap Fit, flush mount
modular jacks and audio/video connectors.
Traditional FRPTs for 3" and 2" Core Hole Applications…
Hubbell SystemOne FRPTs for 4" Core Hole Applications…
Extron® is a registered trademark of Extron Electronics.
Featuring the innovative SystemOne product line, Hubbell’s offering of Fire-Rated Poke-Throughs (FRPT) products provide
installers with a broad range of options to support a wide array of connections. Hubbell SystemOne flush FRPTs install
in a 4” core hole and provide users the flexibility to create personal solutions for their most demanding applications.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell Fire-Rated Poke-Throughs
Features and Benefits
P-4 Wiring Device-Kellems
®www.hubbell-wiring.com
Safety
• Low profile flange, 0.150", is better than ADA requirements
• Hide-away egress door fold under cover while in use
• 180° opening of main door
Functionality
• Cables and connections are protected by recessed
functionality
• Open architecture sub-plate design
• Dirt ingress reduced by egress door brushes
• Exceeds UL 514A Scrub Requirements with
ScrubShield® technology
• Easy selection with common flange for all floor types
Value
• Enhance building décor with numerous finishes
• Increase durability and longevity with cast aluminum covers
8 Inch Sub-Plate Features
Center Plate Configurations
• Allows for three duplex receptacles or up to 18 data and or audio visual jacks
• Open architecture sub-plate design accommodates FSR®, Extron®, Crestron®, etc.
• NEMA spacing between devices
• All plates can be independently wired
Outer Plate Configurations
• Available in pre-wired 20A duplex receptacles or data/AV plates
• Multiple 20A duplex receptacles can be wired to a common circuit or independently
6 Inch Sub-Plate Features
60/40 Device Plate Combination
• Allows for a wide array of data
and audio visual connectivity
with a 20A duplex receptacle
• The two plates can be
independently wired
50/50 Device Plate Combination
• Accommodates up to two 20A
duplex receptacles with eight
data or audio visual connections
• The two plates can be
independently wired
4 Inch Sub-Plate Features
Plate Configurations
• Quad receptacle sub-plate, single or dual circuit wiring
• 2x2 sub plate for decorator or traditional receptacles plus two keystone jacks
• Since service decorator or traditional sub-plates
On-line Resources
• BIM models, customer drawings and technical specifications are available on www.hubbell-wiring.com
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
Features and Benets
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc.
FSR® is a registered trademark of FSR Inc.
P-5
Wiring Device-Kellems
®
www.hubbell-wiring.com
STEP 1: Select Poke Through
8 Inch Recessed Access 6 Inch Recessed Access 6 Inch Furniture Feed 4 Inch Recessed Access
Recommended Fire-Rated Poke-Through Size Chart
To avoid over or under utilizing the capacity of the re-rated poke-through, rst determine how many gangs of power, data
and AV are required for the application. The matrix below will guide you to the correct poke-through size.
Recommended Fire-Rated Poke-Through Size
POWER GANGS
5 8" Exceeds capacity
4 8" 8" of Hubbell recessed
3 6" 8" 8" poke-throughs
2 6" 6" 8" 8"
14" 6" 6" 8" 8"
0 — 4" 6" 8" 8" 8"
012345
DATA AND AV GANGS
Example: 2 gangs of power, 1 gang of AV and 1-gang of data is required.
Find the intersection for 2 power gangs with 2 data/AV gangs.
The highlighted intersection denes the recommended FRPT.
STEP 3: Select Cover Finishes
Black
Powder Coat
Bronze
Plated Finish
Brushed
Brass Plated
Satin
Nickel Plated
Brushed
Aluminum
STEP 2: Select Sub-Plates
8 Inch Recessed Access 6 Inch Recessed Access 4 Inch Recessed Access
Center Sub-Plates
with Outer Sub-plates
60/40 split
Sub-Plates
50/50 split
Sub-Plates
Quad
Sub-Plates
2X2
Sub-Plates
Note: Furniture feed model does not use sub-plates.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
Recessed Poke-Through Ordering
Complies with UL514A
P-6 Wiring Device-Kellems
®www.hubbell-wiring.com
On-Site Exchangeable
Center Compartment Fitting
S1R8PTFIT1
S1R8PTFIT2
S1R8PTFIT3
Recessed 3.5 Inch Deep
Connectivity Chamber
Large Wiring
Compartments
Fixed Wiring Chamber
Standard
¾ Inch EMT
• Step down installation
• Maintains concrete oor re rating up to two hours
• Junction box standard
• For use in the City of Chicago applications, junction box is NOT included
• Features ScrubShield® technology that exceeds UL514A scrub water
exclusion requirements
8 Inch Fire-Rated Poke-Through
Description Catalog Number
8 Inch Fire-Rated Poke-Through includes: (1) ¾ inch power EMT plus
(1) S1R8JNC1 with (1) 1 inch EMT and (1) 1½ inch EMT.
S1R8PTFIT1
8 Inch Fire-Rated Poke-Through includes: (1) ¾ inch power EMT plus
(1) S1R8JNC2 with (2) 1 inch EMT.
S1R8PTFIT2
8 Inch Fire-Rated Poke-Through includes: (1) ¾ inch power EMT plus
(1) S1R8JNC3 with (1) 2 inch EMT.
S1R8PTFIT3
8 Inch Fire-Rated Poke-Through includes: (1) ¾ inch power EMT plus
(1) S1R8JNC1 with (2) 1inch EMT and (1) 1½ inch EMT. No Junction box
or flexible metal conduit.
S1R8PTFIT1CHI
8 Inch Fire-Rated Poke-Through includes: (1) ¾ inch power EMT plus
(1) S1R8JNC2 with (2) 1 inch EMT. No Junction box or flexible metal conduit.
S1R8PTFIT2CHI
8 Inch Fire-Rated Poke-Through includes: (1) ¾ inch power EMT plus
(1) S1R8JNC3 with (1) 2 inch EMT. No Junction box or flexible metal conduit.
S1R8PTFIT3CHI
Note: See page P-25 for technical information.
Cast Aluminum Cover
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
8 Inch Fire-Rated Poke-Through Fittings
Complies with UL514A
P-7
Wiring Device-Kellems
®
www.hubbell-wiring.com
Center Sub-Plates - Single Gang
Description Catalog Number Description Catalog Number
Blank cover plate
S1R8CSPB
(2) Extron® MAAP
openings
S1R8CSPC
(1) 1 unit
Hubbell iSTATION
opening
S1R8CSPD
(1) 1.5 unit
Hubbell iSTATION
opening
(See section W
for modules)
S1R8CSPE
(1) 1.60" opening
for 20A & 30A
Twist-Lock®
S1R8CSPG
(1) Duplex
opening
S1R8CSPI
(1) 1.40" opening
for simplex or 15A
Twist-Lock®
S1R8CSPJ
(1) Style Line®
Decorator
opening
S1R8CSPK
Center Sub-Plates - Two and Three Gang
Two gang;
(4) Extron® AAP
openings
S1R8CSPA
Two gang;
3 unit Hubbell
iSTATION
opening
(See section W
for modules)
S1R8CSPL
Two gang;
(2) Style Line®
Decorator
openings
S1R8CSPM
Two gang;
device depth
extension collar
(for use with 3rd
party data up
to 2.5" depth
or two power
receptacles)
S1R8CSPEXT
Three gang; blank
cover plate
S1R8CSPN
Note: Rectangle sub-plates are for center compartment, crescent sub-plates are for
outer compartments and are not inter-changeable
Extron® is a registered trademark of Extron Electronics.
Crestron® is a registered trademark of Crestron Electronics, Inc.
FSR® is a registered trademark of FSR Inc.
Outer Sub-Plates
Description Catalog Number Description Catalog Number
Blank cover plate
S1R8PSPU
Single Extron®
MAAP opening
S1R8PSPV
Pull through
with 1" bushing
opening
S1R8PSPW
Single Extron®
MAAP opening
S1R8PSPX
(1) 1 unit Hubbell
iSTATION opening
(See section W for
modules)
S1R8PSPY
Dual 20A
pre-wired power
cubes; one circuit
(Supplied with
isolated ground
sticker)
S1R8PSPZ
8 Inch Accessories
Description Catalog Number
Pre-pour tube, includes hardware S1R8PPT*
Abandonment plate, black finish S1R8ADMTBK
Low voltage replacement divider S1R8DIV
Power junction box, 27.0 cubic
inches; (1) ¾ inch and (1) 1 inch
EMT connector
S1FRPTJB
Replacement Fitting Box Catalog Number
(1) 1 inch & (1) 1½ inch EMTs
(2) 1 inch EMTs
(1) 2 inch EMT
S1R8JNC1
S1R8JNC2
S1R8JNC3
Note: *Not UL Listed.
Finish Catalog Number
Brushed Aluminum
Black Powder Coat
Brushed Brass Plated
Bronze Plated Finish
Satin Nickel Plated
S1R8CVRALU
S1R8CVRBLK
S1R8CVRBRS
S1R8CVRBRZ
S1R8CVRNKL S1R8PPT
S1R8JNC1
S1R8JNC2
S1R8JNC3
S1FRPTJB
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
8 Inch Sub-Plates
Outer Plate Configurations
• Available in pre-wired duplexes or
openings to accommodate third party
AV Devices
• Multiple duplexes can be wired in the
supplied junction box or independently
Center Plate Configurations
• Allows for 3 duplexes or up to 18 data/
AV jacks. Other combinations possible
• Accepts third party AV devices
(i.e. FSR®, Crestron®, Extron®)
• Standard NEMA spacing between devices
Recessed 8 Inch Cover
Single Piece 8 Inch FRPT Cover Assembly unit includes
solid cast aluminum construction, carpet gasket and
mounting hardware.
Complies with UL514A
P-8 Wiring Device-Kellems
®www.hubbell-wiring.com
3.5 Inch Recessed
Connectivity Chamber
2 Inch EMT
Large Wiring Compartments,
divides up to 2.9" (73mm) deep
Low Voltage Divider
¾ Inch EMT
• Step down installation
• Maintains concrete oor re rating up to two hours
• Junction box standard
• Includes (1) 2 inch data/AV EMT and (1) ¾ inch power EMT
• For use in the City of Chicago applications, junction box is NOT included
• Features ScrubShield® technology that exceeds UL514A scrub water
exclusion requirements
6 Inch Fire-Rated Poke-Through
Description Catalog Number
6 Inch Fire-Rated Poke-Through S1R6PTFIT
6 Inch Fire-Rated Poke-Through; for use in the City of Chicago S1R6PTFITCHI
Note: See page P-26 for technical information.
S1R6PTFIT
S1R6PTFITCHI
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
6 Inch Fire-Rated Poke-Through Fittings
Complies with UL514A
Cast Aluminum Cover
P-9
Wiring Device-Kellems
®
www.hubbell-wiring.com
6 Inch Accessories
Description Catalog Number
Pre-pour tube, includes hardware S1R6PPT*
Abandonment plate, black finish S1R6ADMTBK
Low voltage replacement divider S1R6DIV
Power junction box, 27.0 cubic
inches; (1) ¾ inch and (1) 1 inch
EMT connector
S1FRPTJB
Replacement
furniture feed fitting
2 Inch
S1RFFFIT2
¾ Inch
S1RFFFIT075
Replacement plugs
Aluminum
Black
Brass
Bronze
Nickel
2 Inch
S1RPLUG2ALU
S1RPLUG2BLK
S1RPLUG2BRS
S1RPLUG2BRZ
S1RPLUG2NKL
¾ Inch
S1RPLUG075ALU
S1RPLUG075BLK
S1RPLUG075BRS
S1RPLUG075BRZ
S1RPLUG075NKL
Note: *Not UL Listed.
50/50 Device Plate Combination
• Allows for up to eight Hubbell data
jacks plus two 20A duplex receptacles
• Two plates which can be wired
independently
Left 50% Sub-Plates
Description Catalog Number Description Catalog Number
(3) Extron®
AAP plate
openings,
left side only
S1R6SPA
Blank cover plate,
left side only
S1R6SPB
(5) Extron® MAAP
plate openings,
left side only
S1R6SPC
(4) 1 unit
Hubbell iSTATION
openings,
left side only
(See section W
for modules)
S1R6SPD
(1) Style Line®
Decorator and
(2) Hubbell
keystone openings,
left side only
S1R6SPE
(2) 1.5 unit
Hubbell iSTATION
openings,
left side only
(See section W
for modules)
S1R6SPF
(3) Extron® MAAP
openings and (2)
Hubbell keystone
jack openings,
left side only
S1R6SPL
(1) Style Line®
Decorator
opening,
left side only
S1R6SPM
Right 50% Sub-Plates
(1)1.60 inch
opening for
20A and 30A
Twist-Lock®,
right side only
S1R6SPG
(4) 20A pre-wired
receptacles;
16 Inch leads;
one or two circuits,
right side only
(Supplied with
isolated ground
sticker)
S1R6SPH
(1) Duplex
device opening,
right side only
S1R6SPI
(1) 1.40 inch
opening for
simplex or 15A
Twist-Lock®,
right side only
S1R6SPJ
(1) Style Line®
Decorator device
opening,
right side only
S1R6SPK
Note: Sub-plates can not be rotated to create additional layouts. When assembled,
sub-plates can not overlap.
Custom Plates available upon request and may be subject to minimum
order quantity.
Extron® is a registered trademark of Extron Electronics.
60/40 Device Plate Combination
• Allows for up to twelve data/AV jacks
plus a 20A duplex receptacle
• Two plates which can be wired
independently
Recessed 6 Inch Cover
6 Inch Fire-Rated Poke-Through cover assembled unit
includes solid cast aluminum construction, carpet gasket
and mounting hardware.
Left 60% Sub-Plates
Description Catalog Number Description Catalog Number
(1) Style Line®
Decorator and
(2) Extron® MAAP
openings,
left side only
S1R6SPV
(1) Style Line®
Decorator and
(2) Extron® AAP
openings,
left side only
S1R6SPX
(2) Style Line®
Decorator
openings,
left side only
S1R6SPW
(1) Style Line®
Decorator and
(2) 1.5 unit
Hubbell iSTATION
openings, left side
only (See section
W for modules) S1R6SPY
Right 40% Sub-Plates
(2) 20A pre-wired
receptacles;
16 inch lead;
one circuit,
right side only
(Supplied with
isolated ground
sticker)
S1R6SPZ
(2) 20A pre-wired
receptacles;
25 foot lead;
one circuit,
right side only
(Supplied with
isolated ground
sticker)
S1R6SPZ25
Finish Catalog Number Furniture Feed Option
Brushed Aluminum
Black Powder Coat
Brushed Brass Plated
Bronze Plated Finish
Satin Nickel Plated
S1R6CVRALU
S1R6CVRBLK
S1R6CVRBRS
S1R6CVRBRZ
S1R6CVRNKL
S1R6FFCVRALU
S1R6FFCVRBLK
S1R6FFCVRBRS
S1R6FFCVRBRZ
S1R6FFCVRNKL
S1R6PPT S1FRPTJB
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
6 Inch Sub-Plates
Complies with UL514A
P-10 Wiring Device-Kellems
®www.hubbell-wiring.com
3 Inch Deep
User Access
Chamber
Deep Wiring
Chamber for GFCI
and USB Devices
Fold Under
Cable Egress Door
One ¾ Inch EMT
0.12 Inch Thick Flange,
ADA Compliant
Field Congurable
Device Plates
Low Voltage Dividers
Two ½ Inch EMTs
• Step down installation
• Maintainsconcreteoorreratinguptotwohours
• Junctionboxstandard,27cubicinches
• (1)¾inchconduitforpowerand(2)½inchconduitsforlowvoltage
• ForuseintheCityofChicago,junctionboxNOTincluded
4 Inch Fire-Rated Poke-Through
Description Catalog Number
4InchFRPTincludes:Junctionboxandlowvoltagedividers. S1R4PTFIT
4InchFRPTincludes:Lowvoltagedividers,junctionboxNOTincluded. S1R4PTFITCHI
4InchFRPTincludes:Quadsub-plateandjunctionbox. S1R4PTQUAD
Note: See page P-27 for technical information.
S1R4PTFIT
S1R4PTFITQUAD
S1R4PTFITCHI
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
4 Inch Fire-Rated Poke-Through Fittings
Complies with UL514A
P-11
Wiring Device-Kellems
®
www.hubbell-wiring.com
Multi-Service Device Plates
Description Catalog Number
2X2 Sub-plate with one duplex
device opening and two keystone
jack openings*.
S1R4SP2X2DUPLEX
2X2 Sub-plate with one Style Line®
decorator device opening and
two keystone jack openings*.
S1R4SP2X2STYLE
Note: *Go to www.hubbell-wiring.com for data jacks and frames.
For low light applications (i.e. under tables or podiums)
consider using Hubbell's LED illuminated receptacles:
HBL8200ILW 15A, LED or HBL8300ILW 20A, LED.
Single-Service Device Plates
Description Catalog Number
Four single 20A receptacles. Can be wired
as single or two circuit with isolated ground
capability, 24 inch wire leads.
S1R4SPQUAD
One 1.60 inch opening for 20 or 30A
Twist-Lock® receptacle.
S1R4SPTWIST
One 1.40 inch opening for simplex
receptacle.
S1R4SPSIMPLEX
One duplex device opening for power
or datacom* applications.
S1R4SPDUPLEX
One Style Line® decorator device opening
for power or datacom* applications.
S1R4SPSTYLE
Note: *Go to www.hubbell-wiring.com for data jacks and frames.
Architectural Cover Finishes
Description Catalog Number
Brushed Aluminum Finish,
Single fold under cable egress door.
S1R4CVRALU
Plated Brushed Brass Finish,
Single fold under cable egress door.
S1R4CVRBRS
Plated Antique Bronze Finish,
Single fold under cable egress door.
S1R4CVRBRZ
Plated Satin Nickel Finish,
Single fold under cable egress door.
S1R4CVRNKL
Note: COVER LOAD RATING: 1,000LBS with 2x safety factor. Load applied through
a 3" (76mm) mandrel in center of the cover. Static loads only.
HBL8300ILW
Powder Coated Cover Finishes
Description Catalog Number
Black Powder Coat Finish,
Single fold under cable egress door.
S1R4CVRBLK
Gray Powder Coat Finish,
Single fold under cable egress door.
S1R4CVRGRY
Note: COVER LOAD RATING: 1,000LBS with 2x safety factor. Load applied through
a 3" (76mm) mandrel in center of the cover. Static loads only.
The 4 Inch recessed cover is available in a number of durable, yet beautiful nishes to match any
décor. The ange height of 0.12 inch is ADA compliant and suitable for use on any oor nish.
All covers are UL514A, scrubwater compliant.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
4 Inch Sub-Plates
Complies with UL514A
4 Inch Accessories
Description Catalog Number
Pre-pour tube, includes hardware S1R4PPT*
Low voltage replacement divider S1R4DIV
Note: *Not UL Listed.
S1R4PPT S1R4DIV
P-12 Wiring Device-Kellems
®www.hubbell-wiring.com
One-Piece Pre-Wired 8 Inch Fire-Rated Poke-Through
Assembled unit includes:
• (1) Hubbell SystemOne 8 inch floor fitting (S1R8PTFIT1)
• (4) 20A, pre-wired receptacles, 18 inch wire lead, two pieces (S1R8PSPZ)
• (1) Fitting connection box with 1 inch and 1½ inch EMT stubs (S1R8JNC1)
• (1) 8 inch flange and universal cover assembly (S1R8CVRxx)
Receptacles feature single circuit wiring
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R8PTZZ1ALU
S1R8PTZZ1BLK
S1R8PTZZ1BRS
S1R8PTZZ1BRZ
S1R8PTZZ1NKL
+
+
+
+
One-Piece 8 Inch Fire-Rated Poke-Through
Assembled unit includes:
• (1) Hubbell SystemOne 8 inch floor fitting (S1R8PTFIT1)
• (1) Fitting connection box with 1 inch and 1½ inch EMT stubs (S1R8JNC1)
• (1) 8 inch flange and universal cover assembly (S1R8CVRxx)
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R8PT1ALU
S1R8PT1BLK
S1R8PT1BRS
S1R8PT1BRZ
S1R8PT1NKL
+
+
One-Piece Pre-Wired 8 Inch Fire-Rated Poke-Through
Assembled unit includes:
• (1) Hubbell SystemOne 8 inch floor fitting (S1R8PTFIT2)
• (4) 20A, pre-wired receptacles, 18 inch wire lead, two pieces (S1R8PSPZ)
• (1) Fitting connection box with (2) 1 inch EMT stubs (S1R8JNC2)
• (1) 8 inch flange and universal cover assembly (S1R8CVRxx)
Receptacles feature single circuit wiring
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R8PTZZ2ALU
S1R8PTZZ2BLK
S1R8PTZZ2BRS
S1R8PTZZ2BRZ
S1R8PTZZ2NKL
+
+
+
+
One-Piece 8 Inch Fire-Rated Poke-Through
Assembled unit includes:
• (1) Hubbell SystemOne 8 inch floor fitting (S1R8PTFIT2)
• (1) Fitting connection box with (2) 1 inch EMT stubs (S1R8JNC2)
• (1) 8 inch flange and universal cover assembly (S1R8CVRxx)
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R8PT2ALU
S1R8PT2BLK
S1R8PT2BRS
S1R8PT2BRZ
S1R8PT2NKL
+
+
One-Piece Pre-Wired 8 Inch Fire-Rated Poke-Through for Data AV
Assembled unit includes:
• (1) Hubbell SystemOne 8 inch floor fitting (S1R8PTFIT3)
• (4) 20A, pre-wired receptacles, 18 inch wire lead, two pieces (S1R8PSPZ)
• (1) Fitting connection box with one 2 inch EMT stubs (S1R8JNC3)
• (1) 8 inch flange and universal cover assembly (S1R8CVRxx)
Receptacles feature single circuit wiring
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R8PTZZ3ALU
S1R8PTZZ3BLK
S1R8PTZZ3BRS
S1R8PTZZ3BRZ
S1R8PTZZ3NKL
+
+ +
+
One-Piece 8 Inch Fire-Rated Poke-Through
Assembled unit includes:
• (1) Hubbell SystemOne 8 inch floor fitting (S1R8PTFIT3)
• (1) Fitting connection box with (1) 2 inch EMT stubs (S1R8JNC3)
• (1) 8 inch flange and universal cover assembly (S1R8CVRxx)
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R8PT3ALU
S1R8PT3BLK
S1R8PT3BRS
S1R8PT3BRZ
S1R8PT3NKL
+
+
Note: xx indicates finish options.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
8 Inch Core Hole, One-Piece Units
Complies with UL514A
P-13
Wiring Device-Kellems
®
www.hubbell-wiring.com
One-Piece Pre-Wired 60/40 Split 6 Inch Fire-Rated Poke-Through for Data AV
Assembled unit includes:
• (1) Hubbell SystemOne 6 inch floor fitting (S1R6PTFIT)
• (2) Decorator opening sub-plate (S1R6SPW)
• (2) 20A, pre-wired receptacle with 18 inch wire leads (S1R6SPZ)
• (1) 6 inch flange and universal cover assembly (S1R6CVRxx)
Receptacles feature single circuit wiring.
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R6PTWZALU
S1R6PTWZBLK
S1R6PTWZBRS
S1R6PTWZBRZ
S1R6PTWZNKL
+ + +
One-Piece Pre-Wired 50/50 Split 6 Inch Fire-Rated Poke-Through for Data AV
Assembled unit includes:
• (1) Hubbell SystemOne 6 inch floor fitting (S1R6PTFIT)
• (4) 1 Unit Hubbell iSTATION openings (S1R6SPD)
• (1) Decorator opening and (2) keystone openings (S1R6SPE)
• (4) 20A, pre-wired receptacles (S1R6SPH)
• (1) 6 inch flange and universal cover assembly (S1R6CVRxx)
Opening architecture Keystone openings accept Hubbell modular jacks and
many others.
Receptacles feature single or two circuit wiring and isolated ground capability.
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R6PTDEHALU
S1R6PTDEHBLK
S1R6PTDEHBRS
S1R6PTDEHBRZ
S1R6PTDEHNKL
+ + + +
One-Piece Pre-Wired 50/50 Split 6 Inch Fire-Rated Poke-Through for Third Party Devices
Assembled unit includes:
• (1) Hubbell SystemOne 6 inch floor fitting (S1R6PTFIT)
• (3) Extron® AAP openings (S1R6SPA)
• (5) Extron® MAPP openings (S1R6SPC)
• (1) Decorator opening and (2) Hubbell keystone openings (S1R6SPE)
• (4) 20A, pre-wired receptacles (S1R6SPH)
• (1) 6 inch flange and universal cover assembly (S1R6CVRxx)
Opening architecture Keystone openings accept Hubbell modular jacks and
many others.
Receptacles feature single or two circuit wiring and isolated ground capability.
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R6PTACEHALU
S1R6PTACEHBLK
S1R6PTACEHBRS
S1R6PTACEHBRZ
S1R6PTACEHNKL
+ + + + +
One-Piece 6 Inch Fire-Rated Poke-Through with Finished Cover
Assembled unit includes:
• (1) Hubbell SystemOne 6 inch floor fitting (S1R6PTFIT)
• (1) 6 inch flange and universal cover assembly (S1R6CVRxx)
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R6PTALU
S1R6PTBLK
S1R6PTBRS
S1R6PTBRZ
S1R6PTNKL
+
One-Piece 6 Inch Fire-Rated Poke-Through for Furniture Feed Applications
Assembled unit includes:
• (1) Hubbell SystemOne 6 inch floor fitting (S1R6PTFIT)
• (1) 6 inch furniture feed flange and cover assembly (S1R6FFCVRxx)
• (1) 2 inch conduit fitting (S1RFFFIT2)
• (1) ¾ inch conduit fitting (S1RFFFIT075)
Finish
Brushed Aluminum
Black Powder Coat
Brass Plated
Bronze Plated (Oil rubbed)
Nickel Plated
Catalog Number
S1R6PTFFALU
S1R6PTFFBLK
S1R6PTFFBRS
S1R6PTFFBRZ
S1R6PTFFNKL
+
Note: xx indicates finish options.
Extron® is a registered trademark of Extron Electronics.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
6 Inch Core Hole, One-Piece Units
Complies with UL514A
P-14 Wiring Device-Kellems
®www.hubbell-wiring.com
Design Solutions for:
Retail, Cafeterias, Commercial Office Space, Mass Transit Hubs, Education.
For Technical files, including BIM models, CAD files and Customer drawings, please visit www.hubbell-wiring.com
under the Technical tab.
Tile Carpet Terrazzo
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed Systems
4 Inch Core Hole, One-Piece Units
One-Piece Pre-Wired, Quad Receptacle, Recessed Connectivity,
Fire-Rated Poke-Through for Power Only
Finish
Brushed Aluminum
Brushed Brass Plated
Antique Bronze Plated
Satin Nickel Plated
Black Powder Coat
Gray Powder Coat
Catalog Number
S1R4PTQUADALU
S1R4PTQUADBRS
S1R4PTQUADBRZ
S1R4PTQUADNKL
S1R4PTQUADBLK
S1R4PTQUADGRY
Assembled unit includes:
• (1) Hubbell SystemOne 4 inch recessed floor fitting (S1R4PTFIT)
• (1) Hubbell SystemOne 4 inch recessed activation cover (S1R4CVRxx)
• (1) Hubbell pre-wired quad receptacle with mounting plate (S1R4SPQUAD)
• (1) Hubbell Junction box (S1FRPTJB)
+
+
+
One-Piece, Fire-Rated Poke-Through, Recessed Connectivity Finish
Brushed Aluminum
Brushed Brass Plated
Antique Bronze Plated
Satin Nickel Plated
Black Powder Coat
Gray Powder Coat
Catalog Number
S1R4PTALU
S1R4PTBRS
S1R4PTBRZ
S1R4PTNKL
S1R4PTBLK
S1R4PTGRY
Assembled unit includes:
• (1) Hubbell SystemOne 4 inch recessed floor fitting (S1R4PTFIT)
• (1) Hubbell SystemOne 4 inch recessed activation cover (S1R4CVRxx)
• (1) Hubbell Junction box (S1FRPTJB)
+
+
Note: xx indicates finish options.
Complies with UL514A
P-15
www.hubbell-wiring.com Wiring Device-Kellems
®
Complies with UL514A
Extron® APP/MAPP
and Power Sub-Plate
Furniture Feed
Cover, Carpet
4x4 Sub-Plate
Dual Style Line®
Decorator Sub-Plate
Datacom and
Power Sub-Plate
Twist-Lock®
Sub-Plate
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush Systems
4 Inch Core Hole
4 Inch Core Through Floor Fittings
Universal Flange and Cover Assembly
Hubbell SystemOne Sub-Plates
Extron® is a registered trademark of Extron Electronics. Siemon™ is a trademark of The Siemon Company.
Panduit® is a registered trademark of Panduit Corp. SYSTIMAX® is a registered trademark of CommScope, Inc.
Ortronics® is a registered trademark of Ortronics/Legrand.
• Step down installation clips allow the
fitting to be installed or removed from
the floor above
• Fire barrier expands during fire
conditions to maintain the floor’s
fire rating
• Adjustable lower fire barrier
accommodates concrete floor
thicknesses from 2¼ to 7 in.
• Oversized EMT conduit tubes
for increased cable capacity
Features
• Accepts all Hubbell SystemOne covers and
sub-plates
• Excellent solution for retrofit and new
construction
• Delivers power, voice, data and multimedia
• UL listed for use in 1 – 4 hour fire rated
floors at 100% rated fill
• Available with integral power junction box
• SystemOne Fire-Rated Poke-Throughs are
approved for use in the City of Chicago
• UL installation spacing - minimum 2 feet on
center, not more than one per 65 square
feet of floor area in each span
Features
• Durable cast aluminum construction
available in black, gray, brass, aluminum
and ivory powder coat finishes
• Features ScrubShield® technology that
exceeds UL514A scrub water exclusion
requirements
• Provides consistent look and maximum
functionality throughout the installed life
• Meets ADA standards for accessible design,
section 4.3.8
Hubbell’s modular sub-plate design allows users to economically
upgrade Hubbell SystemOne FRPT and Floor Boxes to accommodate
future moves, additions and changes. See page P-18 for additional
information.
Features
• Durable cast aluminum construction,
powder coat finish
• Hubbell 4X4: four 20A, 125V receptacles,
four keystone openings for voice/data jacks
and flush multimedia connectors
• Hubbell X-END and Hubbell iSTATION
modular connectivity
• Accommodates Extron® Electronics
Architectural Series audio/video system
integration products
• Accommodates GFCI, surge and standard
Style Line® Decorator receptacles
• Twist-Lock® receptacle with two flush
keystone openings
• Large capacity and multi-service furniture
feed applications
• Open system sub-plates permit maximum
data flexibility
Carpet Tile • Hinged doors open 180 degrees flush
to the carpet flange or tile
• Locking studs allow each door to be
secured independently
• The universal carpet or tile flange can
be used for Hubbell SystemOne Fire-
Rated Poke-Throughs and
Floor Boxes
• Finishes and colors available:
IvoryBrass
Finish
GrayBlackAluminum
Finish
www.hubbell-wiring.com
P-16 Wiring Device-Kellems
®
Complies with UL514A
Hubbell SystemOne 4 Inch Core Hole, One-Piece Units
All Hubbell SystemOne 4 Inch core, one-piece units include the sub-plate and cover to simplify
your order and reduce installation time. Units are also available with a power junction box installed.
The junction box is also available for purchase separately.
Description Color
Catalog Number
without Junction Box
Catalog Number
with Junction Box*
One-Piece 4X4 Poke-Through
Assembled-unit includes:
• Hubbell SystemOne 4X4 floor fitting (S1PT4X4FIT)
• 4x4 sub-plate (S1SP4X4)
• Finish flange and universal carpet cover assembly
(S1CFCxx)
• 4-hour fire classification
Keystone openings accept Hubbell modular jacks, X-END
connectors and flush multimedia snap fit connectors.
Receptacles feature single or two circuit wiring and isolated
ground capability.
Aluminum Finish
Brass Finish
Black/Brass Finish
Black
Gray
S1PT4X4AL
S1PT4X4BRS
S1PT4X4BRS3
S1PT4X4BL
S1PT4X4GY
S1PT4X4ALJ
S1PT4X4BRSJ
S1PT4X4BRS3J
S1PT4X4BLJ
S1PT4X4GYJ
One-Piece Dual Style Line® Decorator Poke-Through
Assembled-unit includes:
• Hubbell SystemOne dual channel floor fitting (S1PTFIT)
• Dual Style Line® decorator opening sub-plate (S1SP)
• Finish flange and universal carpet cover assembly
(S1CFCxx)
• 4-hour fire classification
Style Line® decorator openings accept two Style Line®
decorators or one surge or GFCI receptacle and one Style
Line® decorator receptacle. Outlet frames can be used to
convert the application to a 6-port multi-service or a 12-port
all communication solution. Fitting is 4-hr rated at 100% fill
to accommodate (12) Cat. 6A cables (0.330" diameter).
Aluminum Finish
Brass Finish
Black
Gray
S1PTAL
S1PTBRS
S1PTBL
S1PTGY
S1PTALJ
S1PTBRSJ
S1PTBLJ
S1PTGYJ
One-Piece Modular AV Poke-Through
Assembled-unit includes:
• Hubbell SystemOne AV floor fitting (S1PTAVFIT)
• 20A, 125V power and 3-unit Hubbell iSTATION
sub-plate (S1SP3IM)
• Finish flange and universal carpet cover assembly
(S1CFCxx)
• 4-hour fire classification
The Hubbell iSTATION’s recessed opening can accommodate
data/voice/audio and video solutions including15-pin VGA,
RCA, S-Video, 3.5mm stereo, X-END, HDMI and XLR
microphone jacks.
Aluminum Finish
Brass Finish
Black
Gray
S1PT3IMAL
S1PT3IMBRS
S1PT3IMBL
S1PT3IMGY
S1PT3IMALJ
S1PT3IMBRSJ
S1PT3IMBLJ
S1PT3IMGYJ
One-Piece Furniture Feed Poke-Through
Assembled-unit includes:
• Hubbell SystemOne AV floor fitting (S1PTAVFIT)
• Hubbell SystemOne furniture feed cover plate
(S1SPFFxx)
• 4-hour fire classification
This solution provides one ¾ in. conduit for power and one
1½ in. conduit for low-voltage. Furnished with two screw-in
flexible metal conduit connectors.
Aluminum Finish
Brass Finish
Black
Gray
S1PTFFAL
S1PTFFBRS
S1PTFFBL
S1PTFFGY
S1PTFFALJ
S1PTFFBRSJ
S1PTFFBLJ
S1PTFFGYJ
Note: *Junction box factory installed on through floor fitting. See pages P-28 and P-29 for technical information.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush Systems
4 Inch Core Hole, One-Piece Units
P-17
www.hubbell-wiring.com Wiring Device-Kellems
®
Complies with UL514A
Hubbell SystemOne 4 Inch Core, Three-Piece Units
Description
Catalog Number
without Junction Box
Catalog Number
with Junction Box*
4X4 Through Floor Fitting
Through floor fitting with two ¾ in. EMT for communications and one
¾ in. EMT for power. For use with Hubbell SystemOne universal covers and
S1SP4X4 and S1SPTL series sub-plates only. Universal cover and sub-plate
ordered separately. 4-hour fire classification.
S1PT4X4FIT S1PT4X4FITJ
Dual Channel Through Floor Fitting
Through floor fitting with two 1 in. EMT conduit stems to feed power and/or
communication services. For use with Hubbell SystemOne universal covers and
all Hubbell sub-plates except S1SP4X4 and S1SPTL series. Universal cover
and sub-plate ordered separately. 4-hour fire classification.
S1PTFIT S1PTFITJ
AV Through Floor Fitting
Through floor fitting with one ¾ in. EMT conduit stem for power and one 1½ in.
EMT conduit stem for communication services. Ideal for demanding, high capacity
audio/video and data requirements. For use with Hubbell SystemOne universal
covers and all Hubbell sub-plates except S1SP4X4 and S1SPTL series. Universal
cover and sub-plate ordered separately. 4-hour fire classification.
S1PTAVFIT S1PTAVFITJ
Note: *Junction box factory installed on through floor fitting. See pages P-28 and P-29 for technical information.
Hubbell SystemOne Universal Cover
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush Systems
4 Inch Core Through Floor Fittings
Poke Through Accessories
Description Color Catalog Number
Abandonment Plates
Used to cover abandoned SystemOne
Fire-Rated Poke-Throughs or Floor Boxes.
Black
Gray
S1AP4BL
S1AP4GY
Fire-Rated Closure Plug
Used to seal a 4 Inch core hole when the FRPT is
no longer required and the through-floor fitting is
removed. Maintains the floor’s 1–4 hour fire rating.
Black
Gray
S1FRP4BL
S1FRP4GY
Power Junction Box
For use with SystemOne Fire-Rated Poke-Throughs.
Provides 27.0 cubic inches. (1) ¾ and (1) 1" EMT
connector supplied.
S1FRPTJB
Trade size knockouts:
Top (1) 1 inch
Bottom (1) ¾ inch
Sides (2) ½ inch
(1) ¾ inch
4 inch dia., pre-pour tube, includes hardware.
S1R4PPT
• Cast aluminum construction
• Durable powder coat finish
Color
Carpet Tile
Aluminum Finish
Brass Finish
Black
Gray
Ivory
S1CFCAL
S1CFCBRS
S1CFCBL
S1CFCGY
S1CFCI
S1TFCAL
S1TFCBRS
S1TFCBL
S1TFCGY
S1TFCI
IvoryBrass
Finish
GrayBlackAluminum
Finish
www.hubbell-wiring.com
P-18 Wiring Device-Kellems
®
Complies with UL514A
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush Systems
Sub-Plates
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company. Mini-Com® and Panduit® are registered trademarks of Panduit Corp.
SYSTIMAX® is a registered trademark of CommScope, Inc. TracJack®, Series II® & Ortronics® are registered trademarks of Ortronics/Legrand.
Description
Replacement Threaded Conduit Plugs
Used with S1SPFFx and S1SPFFTx only. Sub-plate is
supplied with plugs.
Description Catalog Number
6-Port Replacement Data Frames
Used with open systems sub-plates. Sub-plate
is supplied with data frame. Siemon MAX® for
use with S1SPMAX sub-plate.
S1DFMAX
Ortronics TracJack® for use with
S1SPTRAC sub-plate.
S1DFTRAC
Black Style Line® decorator blank frame. 2100BK
Sub-Plate Accessories
Color 1½" Plug ¾" Plug
Aluminum Finish
Brass Finish
Black
Gray
S1FP15AL
S1FP15BRS
S1FP15BL
S1FP15GY
S1FP34AL
S1FP34BRS
S1FP34BL
S1FP34GY
Description Catalog Number Description Catalog Number Description Catalog Number
Style Line® Decorator/GFCI
(2) Style Line® decorator openings
for power and/or datacom
applications.
S1SP
Duplex/Duplex
(2) Duplex openings for power
and/or datacom applications.
S1SPDU
Duplex/Style Line® Decorator
(1) Duplex and (1) Style Line®
decorator opening for power
and/or datacom applications.
S1SPDUSL
Hubbell 4 X 4
(4) 20A, 125V receptacles.
(4) Keystone openings for Hubbell
jacks or flush AV connectors.
Power can be wired as single or
two circuit with isolated ground
capability. 24" wire leads.
S1SP4X4
Carpet Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" NPT access
holes for power and/or datacom
applications. Universal cover not
required. Includes carpet flange.
Tile Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" NPT access
holes for power and/or datacom
applications. Universal cover not
required. Includes tile flange.
Provided with 15 ft. wire leads
Provided with 30 ft. wire leads
S1SP4X415
S1SP4X430
Aluminum Fin.
Brass Fin.
Black
Gray
S1SPFFAL
S1SPFFBRS
S1SPFFBL
S1SPFFGY
Aluminum Fin.
Brass Fin.
Black
Gray
S1SPFFTAL
S1SPFFTBRS
S1SPFFTBL
S1SPFFTGY
Single Receptacle + Data
Opening for 20 or 30A Twist-Lock®
receptacle (1.56" OD) and (2)
Keystone openings for Hubbell
jacks or flush AV connectors.
S1SPTL
Hubbell DataCom + Power
(1) 20A, 125V receptacle
and 3-unit recessed Hubbell
iSTATION opening for data, voice,
and AV applications.
S1SP3IM
Hubbell DataCom + Duplex
(1) Duplex opening, (2) flush Keystone
openings and 1.5 unit recessed
Hubbell iSTATION opening for
data, voice and AV applications. S1SPDU2IM
Hubbell DataCom +
Style Line® Decorator
(1) Style Line® decorator opening,
(2) ush Keystone openings
and 1.5 unit recessed Hubbell
iSTATION opening for data,
voice and AV applications.
S1SPSL2IM
Hubbell DataCom
1 unit flush Hubbell iSTATION
opening and 3-unit recessed
Hubbell iSTATION opening for
data, voice, and AV applications.
S1SP4IM
Active Multimedia + Power
Single 20A, 125V receptacle;
(2) flush Keystone openings;
(1) rectangular Style Line® decorator
opening to accommodate active
multimedia modules or low voltage
outlet frames.
S1SPAMM20
Extron® or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) single
Extron® MAAP series adapter
plates or FSR IPS plates.
S1SPEXT1
Extron® or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (1) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates. S1SPEXT2
Extron® or FSR
Single-Service
Recessed opening for (2) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates. S1SPEXT3
Extron® AAP + Power
(1) 20A, 125V receptacle. (2) flush
Keystone and recessed opening
for (2) single Extron® AAP Series
adapter plates. S1SPEXT4
Ortronics Series II® + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) 1 unit
Ortronics Series II® modules.
S1SPORT
Ortronics TracJack® + Power
(1) 20A, 125V receptacle.
Recessed bezel for (6) Ortronics
TracJack® modules.
S1SPTRAC
Panduit Mini Com® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for Panduit
Mini-Com Connectivity.
S1SP4X4PA
SYSTIMAX® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for SYSTIMAX®
Connectivity.
S1SP4X4SYS
Siemon MAX® + Power
(1) 20A, 125V receptacle.
Recessed bezel for
(6) Siemon MAX® modules.
S1SPMAX
Note: *Furnished with two screw-in flexible metal conduit connectors. See Network Wiring section for complete offering of Hubbell jacks and frames.
See page P-19 for FRPT Configuration Chart.
See section W for datacom accessories.
P-19
www.hubbell-wiring.com Wiring Device-Kellems
®
Complies with UL514A
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush Systems
Conguration Chart
Approved for use in the City of Chicago.
(except S1PFB)
Floor Boxes* 4" Core Hole
Fire-Rated Poke-Throughs
Non-Metallic
Metal
Sub-Plates S1PFB S1CFB S1SFB S1SFBAV
S1PTFIT
S1PT4X4FIT
S1PTAVFIT
S1SP Style Line® Decorator/GFCI
3
3.5 3.5 3.5
S1SPDU Duplex/Duplex
3
3.5 3.5 3.5
S1SPDUSL Duplex/Style Line®
Decorator
3
3.5 3.5 3.5
S1SP4X4
S1SP4X4PA
S1SP4X4SYS
Hubbell 4 X 4
Panduit Mini-Com® 4 X 4
SYSTIMAX® 4 X 4
4
4
4
4
S1SPTL Twist-Lock® Receptacle
+ Data
4
4
4
4
S1SP3IM Hubbell DataCom
+ Power
5
5
5
5
S1SP4IM Hubbell DataCom
3.5 3.5 3.5 3.5
S1SPDU2IM Hubbell DataCom
+ Duplex
5
5
5
5
S1SPSL2IM Hubbell DataCom
+ Style Line® Decorator
5
5
5
5
S1SPFFxx
(Carpet)
S1SPFFTxx
(Tile)
Furniture Feed Cover/Flange
(Replace “x” with BRS (brass
finish), AL (aluminum finish),
BL (black) or GY (gray).
3
3.5 3.5 3.5
S1SPEXT1 Extron® or FSR
+ Power
4
4
4
4
S1SPEXT2 Extron® or FSR
+ Power
4
4
4
4
S1SPEXT3 Extron® or FSR
Single-Service
4.5 4.5 4.5 4.5
S1SPEXT4 Extron® or FSR
+ Power
4
4
4
4
S1SPORT Ortronics Series II®
+ Power
5
5
5
5
S1SPTRAC Ortronics TracJack®
+ Power
5
5
5
5
S1SPMAX Siemon MAX® + Power
5
5
5
5
S1SPAMM20 Active Multimedia + Flush
Keystone + Power
5
5
5
5
S1CFCxx
SystemOne
Carpet Cover
SystemOne Floor Boxes
and FRPTs use SystemOne
Universal Covers (Replace
“x” with BRS (brass nish),
AL (aluminum nish),
BL (black), GY (gray) or
I (ivory).
Signifies minimum depth of concrete
pour in inches for Hubbell SystemOne
Floor Boxes.
Recommended
Floor Fitting
Alternative Floor
Fitting
Not Compatible
S1TFCxx
SystemOne
Tile Cover
Note: *See section O for additional information on Floor Boxes.
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company.
Mini-Com® and Panduit® are registered trademarks of Panduit Corp. SYSTIMAX® is a registered trademark of
CommScope, Inc. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
P-20 Wiring Device-Kellems
®
Complies with UL514A
Fire-Rated Poke-Throughs for Concrete Floors
2X2 Flush FRPT
3 Inch Core Hole Units
2X2 Flush FRPT, One-Piece Units (PT2X2FIT)
Description Color Catalog Number Description Color/Material Catalog Number
2X2 Poke-Through
Non-metallic Cover
Black
Gray
Black
Gray
PT2X2BL
PT2X2GY
PT2X2IGBL*
PT2X2IGGY*
2X2 Poke-Through Black/Brass
Brass Finish/Brass
Black/Brass
Brass Finish/Brass
PT2X2BRS3
PT2X2BRS
PT2X2IGBRS3*
PT2X2IGBRS*
• Pre-wired 20A Style Line® decorator
receptacle and (2) Category 5e data jacks
• Painted aluminum ange
• Approved for use in the City of Chicago
• Pre-wired 20A Style Line® decorator
receptacle and (2) Category 5e data jacks
• Solid brass ange
• Approved for use in the City of Chicago
Note: *Includes pre-wired 20A isolated ground duplex Style Line® receptacle.
2X2 Flush FRPT, Two-Piece Units
Description Catalog Number
Multi-Channel Through-Floor Fitting with
(1) ¾ in. EMT stem with junction box
for power and (2) ½ in. EMT stems for
low voltage.
PT2X2FIT
Specications:
• 1 – 4 hour re rating (1 – 3 hour for steel oor units
and concrete topping, D900 Series Design)
• For 2¼ in. to 7 in. oor thickness
• UL installation spacing – minimum 2 ft. on center and
not more than one per 65 sq. ft. of oor area
• Approved for use in the City of Chicago
Service Fittings
Description Color Catalog Number Description Color/Material Catalog Number
2X2 Service Fitting
Non-metallic Cover/
Aluminum Flange
Black
Gray
PT2X2SFBL
PT2X2SFGY
2X2 Service Fitting
Non-metallic Cover/
Brass Flange
Black/Brass
Brass Finish/Brass
PT2X2SFBRS3
PT2X2SFBRS
• Pre-wired 20A Style Line® decorator
receptacle and (2) Category 5e data jacks
• Painted aluminum ange
• Pre-wired 20A Style Line® decorator
receptacle and (2) Category 5e data jacks
• Solid brass ange
Accessories
Description Color/Material Catalog Number Description Color/Material Catalog Number
Non-metallic Replacement
Covers
Brass Finish
Black
Gray
PT2X2CBRS
PT2X2CBL
PT2X2CGY
Closure Plug
Textured aluminum plug seals
3 in. core hole when FRPT
is no longer required and is
removed. Maintains the
oor’s 1 – 4 hour re rating.
UL Listed and CSA Certied.
Gray FRP250
Note: See page P-31 for technical information.
P-21
www.hubbell-wiring.com Wiring Device-Kellems
®
Complies with UL514A
Fire-Rated Poke-Throughs for Concrete Floors
Flush Duplex FRPT
3 Inch Core Hole Units
Flush Duplex FRPT, One-Piece Units
Description Color Catalog Number Description Color/Material Catalog Number
Flush Poke-Through Black
Brown
Gray
Ivory
Gray
Ivory
PT7FSDBLA
PT7FSDBRA
PT7FSDGYA
PT7FSDIA
PT7IGFSDGYA*
PT7IGFSDIA*
Flush Brass Poke-Through All Brass
Black/Brass
All Brass
PT7FSDBRS2A
PT7FSDBRS3A
PT7IGFSDBRSA*
Complete assembled unit includes:
• Pre-wired 20A duplex receptacle
• Non-metallic flip lid cover with
(2) ½ in. diameter low voltage
feed-through holes
• Painted aluminum flange
Complete assembled unit includes:
• Pre-wired 20A duplex receptacle
• All brass or black non-metallic cover option
• Flip lid cover with (2) ½ in. diameter
low voltage feed-through holes
• Solid brass flange
Note: *Includes pre-wired 20A isolated ground duplex receptacle.
Flush FRPT, Two-Piece Units
Description Catalog Number
Multi-Channel Through-Floor Fitting with
(1) ¾ in. EMT stem for power and
(2) ½ in. low voltage feed-through holes.
PT7FSD (with Junction Box)
PT73SD (without Junction Box)
Specifications:
• 1 – 4 hour fire rating (1 – 3 hour for steel floor units
and concrete topping, D900 Series Design)
• For 2¼ in. to 7 in. floor thickness
• UL installation spacing – minimum 2 ft. on center and
not more than one per 65 sq. ft. of floor area
Service Fittings
Description Color Catalog Number Description Color/Material Catalog Number
Flush Aluminum
Service Fitting
Black
Brown
Gray
Ivory
FRFBLA
FRFBRA
FRFGYA
FRFIA
Flush Brass
Service Fitting
Solid Brass FRFBRS2A
Complete assembled unit includes:
• Pre-wired 20A duplex receptacle
• Non-metallic flip lid cover with
(2) ½ in. diameter low voltage
feed-through holes
• Painted aluminum flange
Complete assembled unit includes:
• Pre-wired 20A duplex receptacle
• Solid brass flip lid cover with
(2) ½ in. diameter low voltage
feed-through holes
• Solid brass flange
Accessories
Description Color Catalog Number Description Color/Material Catalog Number
Non-metallic
Replacement Covers
Black
Brown
Gray
Ivory
PFBRCBLA
PFBRCBRA
PFBRCGYA
PFBRCIA
All Brass
Replacement Covers
Solid Brass BRS2RCA
Note: See page P-24 for 3 Inch FRPT accessories.
See page P-31 for technical information.
www.hubbell-wiring.com
P-22 Wiring Device-Kellems
®
Complies with UL514A
Fire-Rated Poke-Throughs for Concrete Floors
Flush Furniture Feed FRPT
3 Inch Core Hole Units
Large Capacity, Single-Service Flush Furniture Feed FRPT, Two-Piece Units
Description Catalog Number Description Color/Material Catalog Number
Large Capacity, Single-Service Through
Floor Fitting with (1) 2 in. EMT stem.
Will accommodate up to 36 Category 5e cables.
PT2FIT Large Capacity
Cover/Flange
Brass Finish
Black
Gray
FF2BRS
FF2BK
FF2GY
Specifications:
• 1- to 2-hour fire rating
• Single-Service, Power or Data
• For 2¼ to 7 in. floor thickness
• UL installation spacing – minimum
2 ft. on center and not more than
1 per 65 sq. ft. of floor area
• Approved for use in the City of Chicago
Specifications:
• Cover/flange with 1¼ in. and 2 in.
trade size combination knockout
• Painted aluminum cover and flange
• Approved for use in the City of Chicago
Note: *Includes pre-wired 20A isolated ground duplex Style Line® receptacle.
See page P-32 for technical information.
Flush Furniture Feed FRPT, One-Piece Units
Description Color Catalog Number Description Color Catalog Number
3-Service Furniture Feed
Poke-Through
Black
Gray
Ivory
PT73FFSDBK
PT73FFSDGY
PT73FFSDI
Single-Service Furniture Feed
Poke-Through
Black
Gray
Ivory
PT7FFSDBK
PT7FFSDGY
PT7FFSDI
Complete assembled unit includes:
• PT73SD floor fitting
• Aluminum cover with (2) ½ in.
threaded hubs for low voltage and
(1) ¾ in. threaded hub for power
• Painted aluminum flange
Complete assembled unit includes:
• PT71SD floor fitting
• Aluminum cover with (1) KO
to accept a ¾ in. connector
• Painted aluminum flange
Note: See page P-32 for technical information.
Flush Furniture Feed FRPT, Two-Piece Units
Description Catalog Number Description Catalog Number
3-Service Furniture Feed Through-
Floor Fitting with (1) ¾ in. EMT stem
for power and (2) ½ in. low voltage
conduit holes.
PT73SD Single-Service Furniture Feed
Through-Floor Fitting with
(1) ¾ in. EMT stem for power
or low voltage applications.
PT71SD
Specifications:
• 1 – 4 hour fire rating (1 – 3 hour
for steel floor units and concrete
topping, D900 Series Design)
Specifications:
• For 2¼ to 7 in. floor thickness
• UL installation spacing – minimum
2 ft. on center and not more than
1 per 65 sq. ft. of floor area
Service Fittings
Description Color Catalog Number Description Color Catalog Number
3-Service Furniture Feed
Service Fitting
Black
Gray
Ivory
FRF3BK
FRF3GY
FRF3I
Single-Service Furniture Feed
Service Fitting
Brass Finish
Black
Gray
FRF1BRS
FRF1BK
FRF1GY
Complete assembled unit includes:
• Aluminum cover with (2) ½ in
threaded hubs for low voltage and
(1) ¾ in. threaded hub for power
• Painted aluminum flange
Complete assembled unit includes:
• Aluminum cover with (1) KO
to accept a ¾ in. connector
• Painted aluminum flange
Note: See page P-24 for 3 Inch FRPT accessories.
See page P-32 for technical information.
P-23
www.hubbell-wiring.com Wiring Device-Kellems
®
Complies with UL514A
Fire-Rated Poke-Throughs for Concrete Floors
Painted Pedestal FRPT
2 and 3 Inch Core Hole Two-Piece Units
Pedestal Face Plates (Order 1 plate per gang)
Description Color/Material Catalog Number Description Color/Material Catalog Number
Duplex Black
Gray
SS2309DBKA
SS2309DGYA
Furniture feed
(¾ in. KO)
Alum. Finish
Black
Gray
SS2309FALA
SS2309FBKA
SS2309FGYA
Style Line®/
GFCI
Black
Gray
SS2309SLBKA
SS2309SLGYA
Furniture feed
(1 in. KO)
Black
Gray
SS2309F1BKA
SS2309F1GYA
Single receptacle
(1.39 in. OD)
Black
Gray
SS2309SBKA
SS2309SGYA
Bushed data
opening
(1 in. ID)
Black
Gray
SS2309TBKA
SS2309TGYA
Blank Alum. Finish
Black
Gray
SS2309BALA
SS2309BBKA
SS2309BGYA • Painted aluminum plates
• UL Listed and CSA Certied
3 Inch Core Hole, Two-Piece Unit 2 Inch Core Hole, Two-Piece Unit
Description Catalog Number Description Catalog Number
Large Capacity Multi-Service Pedestal
Through-Floor Fitting with (1) 1¼ in.
EMT stem for low voltage and (1) ½ in.
EMT stem for power applications.
PT7XC Multi-Service Pedestal Through-Floor
Fitting with (1) ¾ in. EMT stem for
low voltage and (1) ½ in. EMT stem
for power applications.
PT27A
Specifications:
• 1 – 4 hour fire rating (1 – 3 hour for
steel floor units and concrete topping,
D900 Series Design)
• For 2¼ in. to 7 in. floor thickness
• Approved for use in the City of Chicago
Specifications:
• 1 – 4 hour fire rating (1 – 3 hour for
steel floor units and concrete topping,
D900 Series Design)
• For 2¼ in. to 7 in. floor thickness
• Approved for use in the City of Chicago
Note: *Includes pre-wired 20A isolated ground duplex receptacle.
See page P-33 for technical information.
Pedestal Service Fittings (Order 1 plate per gang)
Description Color/Material Catalog Number Description Color Catalog Number Description Color Catalog Number
2-Gang Alum. Finish
Black
Gray
FR280ALA
FR280BKA
FR280GYA
4-Gang Black
Gray
FR480BKA
FR480GYA
6-Gang Black
Gray
FR680BKA
FR680GYA
Use with PT27A only. Use with PT27A or PT7XC. Use with PT27A or PT7XC.
• Painted aluminum housing with low voltage barrier(s); plates and devices sold separately
• For additional barriers, use FRBR1, see page P-21.
• UL Listed and CSA Certied
Note: See page P-33 for technical information.
FR280BKA FR480GYA FR680BKA
www.hubbell-wiring.com
P-24 Wiring Device-Kellems
®
Complies with UL514A
Through-Floor Fitting Pedestal Service Fitting
Description Catalog Number Description Color/Material Catalog Number
Large Capacity Multi-Service Pedestal
Through-Floor Fitting with (1) 1¼ in.
EMT stem for low voltage and (1) ½ in.
EMT stem for power applications.
PT7XC 2-Gang Pedestal
Service Fitting
For use with PT7XC only.
Brushed
Aluminum
FR80AL
Specifications:
• 1 – 4 hour fire rating (1 – 3 hour for
steel floor units and concrete topping,
D900 Series Design).
• For 2¼ in. to 7 in. floor thickness.
• Approved for use in the City of Chicago.
Specifications:
• Brushed aluminum housing
with low voltage barrier. Plates
and devices sold separately.
Note: See pages P-33 and P-34 for technical information.
Fire-Rated Poke-Throughs for Concrete Floors
Brushed Aluminum Pedestal FRPT
3 Inch Core Hole Two-Piece Units
Plates
Description Catalog Number Description Catalog Number
Duplex SS309D Furniture feed (¾ in. KO) SS309SF*
Style Line®/GFCI SS309DS Furniture feed, blank SS309BF*
Single receptacle
(1.39 in. OD)
SS309S Bushed data opening
(1 in. ID)
SS309T
Blank SS309B • 302/304 stainless steel plates
(SS309SF & SS309BF are aluminum).
• UL Listed and CSA Certified.
Note: *For furniture feed applications using SS309SF, a SS309BF blank must be used for second plate.
3 Inch Core Hole FRPT Accessories
Description Color Catalog Number Description Color/Gang Catalog Number
Flush FRPT Abandonment Plate
Use with PT7FSD, PT73SD or
PT71SD only. Covers the opening
when FRPT is abandoned. Service
tting is removed and through-oor
tting remains.
Gray
Ivory
AP2GY
AP2I
PT7XC Extension Kit
Extends PT7XC FRPT to
accommodate between 7 in.
and 13 in. oor thickness.
—EXT13
Multi-Service Furniture Feed
Replacement Inserts
Use as a replacement cover for PT73FFSD
series, or to convert installed PT7FSD series
into furniture feed FRPTs. Includes (2) ½ in.
threaded hubs for low voltage and (1) ¾ in.
threaded hub for power. (UL Listed only.)
Gray
Ivory
FF3GY
FF3I
Pedestal FRPT
Abandonment Plate
Use with PT27A or PT7XC only.
Covers the opening when
FRPT is abandoned. Service
tting is removed and through-
oor tting remains.
Gray/
2-gang
Gray/
4-gang
AP22
AP42
Replacement Low Voltage Barrier
Use with FR280, FR480, and FR680
pedestal service ttings only when
additional power/low voltage
separation is required.
FRBR1
P-25
Wiring Device-Kellems
®
www.hubbell-wiring.com
Product Information
• Plated cast aluminum covers available in brass, nickel or bronze nishes. Additionally available in brushed aluminum or black powder coat.
• S1R8SPZ sub-plate supplied with pre-wired duel 20A receptacle. Wired with three #12 AWG solid conductors.
• Meets ADA standards for accessible design, section 4.3.8, "changes in level."
• Meets UL 514A scrub water exclusion requirements.
Application Data
• Cover mounts to recessed 8 Inch FRPTs and LCFB series oor box with applicable
adapter (LCFBS1R8ADAPT), see page O-17 for additional information.
• Mounted in 8 in. (203.2) cored concrete diameter through hole.
• Minimum oor thickness: 2¼ in. (57.2).
• UL Listed for re resistance in 1 – 2 hour rated D900 series oors.
• Approved for use in the City of Chicago.
UL Listed Wiring Capacity
S1R6PT Series
Fire Resistance Rating 2-Hrs. (D900)
Max. Copper Cross Section Outer Chambers (each) Center Chamber
.0154 sq. in. .0633 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½ or 2 hour rated unprotected reinforced oors or in 1 or 2 hour rated oors employing steel oor units and concrete topping
(D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: The above product data pertains to both one-piece units, three-piece units and through-floor fittings.
When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed 8 Inch Series
Technical Information
S1R8JNC1
S1R8JNC2
S1R8JNC3
(1) 1" EMT
(2) 1" EMT
(1) 1½" EMT
(1) 2" EMT
Ø 9.50"
(241.3)
1.30"
(32.9)
.15" (3.8)
8.59"
(218.3)
Ø 8.04"
(204.3)
6.48"
(164.5)
Bottom Feed Box
1.14" (29.0)
For Flex
Connection
¾" EMT
S1R8PT Series
Complies with UL514A
Dimensions in Inches (mm)
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
P-26 Wiring Device-Kellems
®www.hubbell-wiring.com
Product Information
• Plated cast aluminum covers available in brass, nickel or bronze nishes. Additionally available in brushed aluminum or black powder coat.
• S1R6SPZ sub-plate supplied with pre-wired duel 20A receptacle. Wired with three #12 AWG solid conductors.
• S1R6SPH sub-plate supplied with pre-wired quad 20A receptacle. Wired with six #12 AWG solid conductors.
Receptacle can be wired as duel circuit and isolated ground.
• S1R6PTFF series furnished with one (1) ¾ in. and one (1) 2 in. screw-in exible metal conduit connectors.
• Meets ADA standards for accessible design, section 4.3.8, "changes in level."
• Meets UL 514A scrub water exclusion requirements.
Application Data
• Mounted in 6 in. (152.4) cored concrete diameter through hole.
• Minimum oor thickness: 2¼ in. (57.2).
• UL Listed for re resistance in 1 – 2 hour rated D900 series oors.
• Approved for use in the City of Chicago.
UL Listed Wiring Capacity
S1R6PT Series S1R6PTFF Series
Fire Resistance Rating 2-Hrs. (D900) 2-Hrs. (D900)
Max. Copper Cross Section ¾ in. Power EMT 2 in. Low Voltage EMT ¾ in. Power EMT 2 in. Low Voltage EMT
.0307 sq. in. .0348 sq. in. .0815 sq. in. .0962 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½ or 2 hour rated unprotected reinforced oors or in 1 or 2 hour rated oors employing steel oor units and concrete topping
(D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: The above product data pertains to both one-piece units, three-piece units and through-floor fittings.
When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed 6 Inch Series
Technical Information
¾" EMT
2" EMT
.15" (3.8)
8.59"
(218.3)
Ø 7.50"
(190.5)
1.30"
(32.9)
Ø 6.04"
(153.5)
¾" EMT
2" EMT
.15" (3.8)
8.59"
(218.3)
2.03" (51.6) 2" NPT
Connector Installed
1.30"
(32.9)
Ø 7.50"
(190.5)
Ø 6.04"
(153.5)
S1R6PT Series S1R6PTFF Series
Dimensions in Inches (mm)
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
Complies with UL514A
P-27
Wiring Device-Kellems
®
www.hubbell-wiring.com
Product Information
• Plated cast aluminum covers available in brass, nickel or bronze nishes. Additionally available in brushed aluminum, black or gray powder coat.
• S1R4SPQUAD sub-plate supplied with pre-wired quad 20A receptacle. Wired with six #12 AWG solid conductors.
Receptacle can be wired as duel circuit and isolated ground.
• Meets ADA standards for accessible design, section 4.3.8, "changes in level."
• Meets UL 514A scrub water exclusion requirements.
Application Data
• Mounted in 4 in. (139.7) cored concrete diameter through hole.
• Minimum oor thickness: 2¼ in. (57.2).
• UL Listed for re resistance in 1 – 2 hour rated D900 series oors.
• Approved for use in the City of Chicago.
UL Listed Wiring Capacity
S1R4PT Series
Fire Resistance Rating 2-Hrs. (D900)
Max. Copper Cross Section ¾ in. Power EMT ½ in. Low Voltage EMT
.0408 sq. in. .008 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½ or 2 hour rated unprotected reinforced oors or in 1 or 2 hour rated oors employing steel oor units and concrete topping
(D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: The above product data pertains to both one-piece units, three-piece units and through-floor fittings.
When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Recessed 4 Inch Series
Technical Information
(2) ½" EMT
¾" EMT
.06"
(1.6)
8.08"
(205.3)
7.09"
(180.2)
Ø 5.50"
(139.7)
1.28"
(32.4)
Ø 4.04"
(102.7)
1.84"
(46.7)
S1R4PT Series
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
Complies with UL514A
P-28 Wiring Device-Kellems
®www.hubbell-wiring.com
Ø 3.88" (98.6)
Gasket
2.29"
(58.2)
2.80"
(71.1)
1.05"
(26.7) 0.40"
(10.2)
¾" EMT
12.54"
(318.5)
Adjustable
lower fire barrier
Ø 8.00"
(203.2)
0.67"
(17.0)
0.93"
(23.6)
3.86"
(98.0)
15.59"
(396.0)
1.06"
(26.9)
13.59"
(345.2)
1" EMT
Ø 3.88" (98.6)
Ø 8.00"
(203.2)
Adjustable
lower fire barrier
Gasket
0.40"
(10.2)
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush 4 Inch Series
Technical Information
S1PT4X4 Series S1PT Series
Product Information
• Powder coat cast aluminum cover and ange (color nish options: aluminum, brass, black, gray and ivory).
• Hubbell SystemOne universal cover meets ADA standards for accessible design, section 4.3.8, "changes in level."
• S1SP4X4 sub-plate supplied with pre-wired, molded, four position 20A, 125V, black receptacle, NEMA 5-20R.
• S1SP4X4 wired with six thermally protected #14 AWG THHN stranded copper conductors, receptacle can be
wired as dual-circuit and isolated ground.
• S1SP4X4 accepts four (4) Hubbell HXJ6, HXJ5E, HXJU; category 6A, 6, 5e, and USOC, and ush series jacks.
• S1SP sub-plate accepts two (2) 15A or 20A Style Line® decorator receptacles, Style Line® data frames,
and/or one (1) GFCI or surge receptacle.
Application Data
• Mounted in 4 in. (101.6) cored concrete diameter through hole.
• Minimum oor thickness: 2¼ in. (57.2).
• UL Listed for re resistance in 1 – 4 hour rated D900 series oors.
• Approved for use in the City of Chicago.
UL Listed Wiring Capacity
S1PT4X4 Series S1PT Series
Fire Resistance Rating 4-Hrs. (D900) 4-Hrs. (D900)
Max. Copper Cross Section ¾ in. Power EMT 1 in. Power EMT
.0307 sq. in. .0307 sq. in.
¾ in. Low Voltage EMT 1 in. Low Voltage EMT
.016 sq. in. .024 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½ or 2 hour rated unprotected reinforced oors or in 1 or 2 hour rated oors employing steel oor units and concrete topping (D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: The above product data pertains to both one-piece units, three-piece units and through-floor fittings.
When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
Complies with UL514A
Dimensions in Inches (mm)
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
P-29
Wiring Device-Kellems
®
www.hubbell-wiring.com
0.60" (15.2)
1.93" (49.0)
0.93"
(23.6)
3.90"
(99.1)
13.02"
(330.7)
1.04"
(26.4)
11.02"
(279.9)
Ø 3.88" (98.6)
Ø 8.00"
(203.2)
Adjustable
lower fire barrier
Gasket
¾" EMT
1½" EMT
0.40"
(10.2)
S1PTAVFIT and S1PT3IM Series
13.02"
(330.7)
0.53"
(13.6)
0.93"
(23.6)
1.93" (49.0)
3.76"
(95.4)
11.02"
(279.9)
¾" EMT
1½" EMT
Ø 3.88"
(98.6)
1.01"
(25.7)
Adjustable lower
fire barrier
Ø 5.36"
(136.1)
1½" NPT
Data
¾" NPT
Power
Gasket
0.40"
(10.2)
Ø 8.00"
(203.2)
S1PTFF Series
Product Information
• Powder coat cast aluminum cover and ange (color nish options: aluminum, brass, black, gray and ivory).
• Hubbell SystemOne universal cover meets ADA standards for accessible design, section 4.3.8, "changes in level."
• S1PTFF series aluminum conduit insert cover with one (1) ¾ in. and one (1) 1½ in. die-cast threaded plugs.
• S1PTFF series furnished with one (1) ¾ in. and one (1) 1½ in. screw-in exible metal conduit connectors.
• S1PT3IM series sub-plate supplied with pre-wired single 20A 125V black receptacle, NEMA 5-20R.
• S1PT3IM wired with three #12 AWG THHN stranded copper conductors.
• S1PT3IM sub-plate also accepts three unit recessed Hubbell iSTATION; 15-Pin VGA, RCA, S-Video,
3.5 mm stereo and XLR microphone jacks.
• Meets UL 514A scrub water exclusion requirements.
Application Data
• Mounted in 4 in. (101.6) cored concrete diameter through hole.
• Minimum oor thickness: 2¼ in. (57.2).
• UL Listed for re resistance in 1 – 4 hour rated D900 series oors.
• Approved for use in the City of Chicago.
UL Listed Wiring Capacity
S1PTAVFIT and S1PT3IM Series S1PTFF Series
Fire Resistance Rating 4-Hrs. (D900) 4-Hrs. (D900)
Max. Copper Cross Section ¾ in. Power EMT ¾ in. Power EMT 1½ in. Low Voltage EMT
.0307 sq. in. .072 sq. in. .100 sq. in.
1½ in. Low Voltage EMT
.048 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½ or 2 hour rated unprotected reinforced oors or in 1 or 2 hour rated oors employing steel oor units and concrete topping (D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: The above product data pertains to both one-piece units, three-piece units and through-floor fittings.
When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush 4 Inch Series
Technical Information
Complies with UL514A
Dimensions in Inches (mm)
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
P-30 Wiring Device-Kellems
®www.hubbell-wiring.com
Product Information
• Powder coat cast aluminum cover and ange (color nish options: aluminum, brass, black, gray and ivory).
• Hubbell SystemOne universal cover meets ADA standards for accessible design, section 4.3.8, "changes in level."
• S1SPFF and S1SPFFT series aluminum conduit insert cover with one (1) ¾ in. and one (1) 1½ in. die-cast threaded plugs.
• S1SPFF and S1SPFFT series furnished with one (1) ¾ in. and one (1) 1½ in. screw-in exible metal conduit connectors.
• Meets UL 514A scrub water exclusion requirements.
0.40"
(10.2)
Ø 6.90"
(175.3)
0.47"
(11.9)
0.64"
(16.3)
Ø 5.62"
(142.7)
Gasket
Carpet
Tile
.55"
(14.0)
Ø 8.00"
(203.2)
S1CFC and S1TFC Series S1SPFF and S1SPFFT Series
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell SystemOne Flush 4 Inch Series
Technical Information
Ø 5.36"
(136.1)
1½" NPT
Data
¾" NPT
Power
Ø 8.00"
(203.2)
Ø 5.62"
(142.7)
3.66"
(93.0)
3.66"
(93.0)
2.41"
(61.2)
0.47"
(11.9)
0.64"
(16.3)
Gasket
Carpet
Tile
0.40"
(10.2)
Complies with UL514A
Dimensions in Inches (mm)
P-31
Wiring Device-Kellems
®
www.hubbell-wiring.com
Product Information
• Flush thermoplastic cover with matching painted aluminum ange (black, brown, gray, ivory) or solid brass cover and ange.
• PT2X2 series supplied with Hubbell pre-wired HBL2162BK; black Stye Line® or IG2162 (isolated ground) receptacle, NEMA 5-20R, 20A, 125V.
• PT2X2 series supplied with two (2) Hubbell HXJ5EBK black jacks; category 5e, UL Listed, 110 type contacts.
• PT7 series supplied with Hubbell pre-wired HBL5352 or IG5362 (isolated ground) series receptacle, NEMA 5-20R, 20A, 125V.
• PT7 series supplied with two (2) ½ in. low voltage feed through holes . Two (2) feed through bushings
supplied (cover will not accept data jacks).
• Wired with three (3) #12 AWG THHN stranded copper conductors.
• Supplied with 13.0 cu. in. junction box having eight (8) ¾ in. knockouts.
Application Data
• Mounted in 3 in. (76.2) cored concrete diameter through hole.
• Floor thickness range: 2¼ to 7 in. (57.2 to 177.8).
• UL Listed for re resistance in 1 – 4 hour rated oors.
• Approved for use in the City of Chicago (PT2X2 series).
UL Listed Wiring Capacity
PT2X2 Series PT7 Series
Fire Resistance Rating 4-Hrs. (D900) 4-Hrs. (D900)
Max. Copper Cross Section ¾ in. Power EMT ½ in. Data EMT ¾ in. Power EMT Low Voltage EMT
.0155 sq. in. .0026 sq. in. .0155 sq. in. .0250 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½, 2, 3 or 4 hour rated unprotected reinforced oors or in 1, 2, or 3 hour rated oors employing steel oor units and concrete topping (D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
The above product data pertains to both one-piece units and through-floor fittings.
Ø 7.00"
(177.8)
16.67"
(423.4)
¾" EMT
8x ¾" NPT
KO (TYP.)
Ø 2.88"
(73.2)
8.10"
(205.7)
0.58"
(14.7)
2x ½" EMT Ø 2.88"
(73.2)
B
A
2x Ø .50"
(12.7)
Floor Gasket
¾" EMT
8x ¾" NPT
KO (TYP.)
Ø 7.00"
(177.8)
PT2X2 Series PT7 Series
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell 3 Inch Series
Technical Information
Series Dimension A Dimension B
Thermoplastic cover with aluminum ange. 13.24 in. [336.2] .51 in. [13.0]
Brass cover and ange. 13.20 in. [335.2] .49 in. [12.4]
Complies with UL514A
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
Dimensions in Inches (mm)
P-32 Wiring Device-Kellems
®www.hubbell-wiring.com
Product Information
PT2FIT series
• Flush aluminum service tting with epoxy paint nish (gray, black and brass nish).
• Aluminum conduit cover with 2.47 in. (62.7) and 1.74 in. (44.2) combination knockouts to accept a 2 in. or 1¼ in. NPT exible metal conduit connector.
PT73FFSD series
• Flush painted aluminum service tting and carpet ange (color nish options: black, gray and ivory).
• Aluminum conduit insert cover with one (1) ¾ in. and two (2) ½ in. die-cast threaded plugs.
• Supplied with one (1) ¾ in. and two (2) ½ in. screw-in exible metal conduit connectors.
PT73FFSD series
• Flush aluminum service tting with epoxy paint nish (color nish options: gray, ivory and brass nish).
• Aluminum conduit cover with 1.11 in. (28.2) knockout to accept a ¾ in. NPT exible metal conduit connector.
Application Data
• Mounted in 3 in. (76.2) cored concrete diameter through hole.
• Floor thickness range: 2¼ in. to 7 in. (57.2 to 177.8).
• PT2FIT series has single-service, power or data.
• UL Listed for re resistance in 1 – 2 hour (PT2FIT series) rated oors.
• UL Listed for re resistance in 1 – 4 hour (PT73FFSD and PT7FFSD series) rated oors.
• Approved for use in the City of Chicago (PT2FIT series).
UL Listed Wiring Capacity
PT2FIT Series PT73FFSD Series PT7FFSD Series
Fire Resistance Rating 2-Hrs. (D900) 4-Hrs. (D900) 4-Hrs. (D900)
Max. Copper Cross Section 2 in. EMT ¾ in. EMT ½ in. Feed Through ¾ in. EMT
.0922 sq. in. .0470 sq. in. .0250 sq. in. .0500 sq. in.
UL Characteristics
Listing UL File Number ULC File Number
Outlet Box E31999 CEYYC
Fire Resistance R8429 R8429
For use in 1, 1½, or 2 hour rated unprotected reinforced oors or in 1 or 2 hour rated oors employing steel oor units and concrete topping (D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of oor area in each span.
Note: The above product data pertains to both one-piece units and through-floor fittings.
When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
Fire-Rated Poke-Throughs for Concrete Floors
Hubbell 3 Inch Series
Technical Information
2" E.M.T.
1¼" - 2" N.P.T. Combo K.O.
Ø 2.88"
(73.2)
11.81"
(300.0)
0.25"
(6.4)
Ø 8.00"
(203.2)
PT2FIT Series
7.00"
(177.8)
Two ½" NPT
threaded plugs
for voice/data
One ¾" NPT
threaded plug
for power
3.88"
(98.6)
8.50"
(215.9)
¾" EMT
PT73FFSD Series
7.00"
(177.8)
8.50"
(215.9)
¾" EMT
1.11" (28.2) knockout
for ¾" conduit connector
PT7FFSD Series
Complies with UL514A
Dimensions in Inches (mm)
Wire
Size
(AWG)
Copper Cross Sectional
Area for Solid or Stranded
Conductors
#24 .00032 sq. in. (.206mm2)
#23 .00040 sq. in. (.258mm2)
#22 .00050 sq. in. (.322mm2)
#14 .00323 sq. in. (2.083mm2)
#12 .00512 sq. in. (3.303mm2)
#10 .00815 sq. in. (5.258mm2)
# 8 .01296 sq. in. (8.361mm2)
P-33
www.hubbell-wiring.com Wiring Device-Kellems
®
Complies with UL514A
Applications PT27A PT7XC
Mounting 2 in. (50.8) diameter hole. 3 in. (76.2) diameter hole.
Floor Thickness Range 2¼ in. to 7 in. (57.2 to 177.8) 2¼ in. to 7 in. (57.2 to 177.8)
Fire Rating For use in 1, 1½, 2, 3 or 4 hour rated unprotected For use in 1, 1½, 2, 3 or 4 hour rated unprotected
reinforced concrete oors or in 1, 2 or 3 hour rated reinforced concrete oors or in 1, 2 or 3 hour rated
employing steel oor units and concrete topping oors employing steel oor units and concrete topping
(D900 series design). (D900 series design).
Service Pedestal Options FR280, FR480, FR680 Series. FR480 and FR680 Series.
UL Listed Wiring Capacity
Power Wiring Capacity ½ in. inch EMT power tube ½ in. inch EMT power tube
Handles: Handles:
Up to ten #12 AWG type THHN wires, or Up to ten #12 AWG type THHN wires, or
Up to six #12 AWG and two #10 AWG type THHN wires. Up to six #12 AWG and two #10 AWG type THHN wires.
Voice/Data Wiring Capacity ¾ in. inch EMT low-voltage tube 1¼ in. inch EMT low-voltage tube
Handles: Handles:
Up to two 25 pair tel./data cables Up to four 25 pair tel./data cables
(100 #22 AWG tel./data conductors), or (200 #22 AWG tel./data conductors), or
Up to two IBM Type 2 data cables. Up to ve IBM Type 2 data cables and
four 8-conductor tel./data cables.
Total Allowable ½" Power EMT ¾" Low Voltage EMT ½" Power EMT 1½" Low Voltage EMT
Copper Cross-Sectional Area .0461 sq. in. .0500 sq. in. .0461 sq. in. .1000 sq. in.
When conductors larger than #22 AWG are used, the total cross-sectional area of the copper conductors shall not exceed the total cross-sectional area of
the #22 AWG conductors permitted in the low voltage compartment.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables.
UL Characteristics
Listing UL File Number UL File Number
Outlet Box E31999 E31999
Fire Resistance R8429 R8429
For use in 1, 1½, 2, 3, or 4 hour rated unprotected reinforced concrete oors or in 1, 2 or 3 hour rated oors employing steel oor units and concrete topping
(D900 Series designs).
UL Spacing Restrictions - Minimum of 2 ft. O.C. and not more than one unit per each 65 sq. ft. of oor area in each span.
Chicago Approved
Catalog Number City of Chicago File Number
PT27A, PT7XC 5587E
These through-oor ttings are approved for the City of Chicago. Installation requires a plenum-rated 1900 series box or a handy box with gasketed cover.
These boxes are to be afxed with compression gland-type connectors.
7.25"
(184.2) 9.25"
(235.0)
¾" EMT
Voice/Data
Tube
½" EMT
Power Tube
1¼" EMT
Voice/Data
Tube
½" EMT
Power Tube
8.25"
(209.6)
10.25"
(260.4)
Fire-Rated Poke-Throughs for Concrete Floors
Pedestal FRPT
Technical Information
Pedestal Fitting Series
Dimensions in Inches (mm)
www.hubbell-wiring.com
P-34 Wiring Device-Kellems
®
Complies with UL514A
Dimensions
2-Gang – FR280 series
5.45"
(138.4) 4.61"
(117.0)
2.82"
(71.6)
Top inside view
of pedestal base
Voice/Data
Power
Total Cubic Inch Capacity (Single-Service) 39.00 in. (638.8cm3)
Cubic Inch Capacity Power 19.5 in. (319.4cm3)
(when divided for multi-service) Voice/Data 19.5 in. (319.4cm3)
Service Pedestal Construction Heavy gauge galvanized steel frame with aluminum housing and face plates.
Pedestal Finish Textured black or gray epoxy paint.
4-Gang – FR480
5.45"
(138.4)
9.03"
(229.4)
2.79"
(70.9)
Top inside view
of pedestal base
Voice/Data
Power
Total Cubic Inch Capacity (Single-Service) 78.00 in. (1277.6cm3)
Cubic Inch Capacity Power 39.00 in. (638.8cm3)
(when divided for multi-service) Voice/Data 39.00 in. (638.8cm3)
Service Pedestal Construction Heavy gauge galvanized steel frame with aluminum housing and face plates.
Pedestal Finish Textured black or gray epoxy paint.
6-Gang – FR680
5.45"
(138.4)
13.45"
(341.6)
2.79"
(70.9)
Top inside view
of pedestal base
Voice/Data
Power
Total Cubic Inch Capacity (Single-Service) 117.00 in. (1916.4cm3)
Cubic Inch Capacity Power 58.5 in. (958.2cm3)
(when divided for multi-service) Voice/Data 58.5 in. (958.2cm3)
Service Pedestal Construction Heavy gauge galvanized steel frame with aluminum housing and face plates.
Pedestal Finish Textured black or gray epoxy paint.
2-Gang – FR80AL
4.50"
(138.4) 4.37"
(110.0)
2.95"
(74.9)
Top inside view
of pedestal base
Voice/Data
Power
Total Cubic Inch Capacity (single service) 33.00 in. (540.9 cu cm3)
Cubic Inch Capacity Power 8.80 in. (144.2cm3)
(when divided for multi-service) Voice/Data 26.70 in. (437.6cm3)
Service Pedestal Construction Heavy gauge aluminum frame with satin anodized aluminum housing with 302/304 stainless steel face plates.
Pedestal Finish Brushed.
Fire-Rated Poke-Throughs for Concrete Floors
Pedestal FRPT
Technical Information
Painted and Brushed Aluminum Series
Dimensions in Inches (mm)
