~~
+_
0.029(0.74)
0.017(0.43)
0.161(4.10)
0.144(3.65)
0.272(6.90)
0.252(6.40)
0.105(2.67)
0.095(2.41)
0.195(4.95)
0.170(4.55)
0.114(2.90)
0.094(2.40)
0.106(2.70)
0.090(2.30)
0.075(0.19)
0.065(0.16)
0.034(0.96)
0.019(0.48)
0.117(2.97)
0.197(2.72)
0.059(1.47)
0.054(1.37)
0.006(0.20)
0.004(0.10)
0.195(4.95)
0.206(5.21)
0.018(0.41)
0.006(0.15)
0.018(0.48)
0.014(0.58)
0.038(0.99)
0.048(1.34)
0.039(0.98)
0.049(1.34)
www.galaxycn.com
inch (mm)
BL
BLGALAXY ELECTRICAL
Document Number 0287001 1.
GALAXY ELECTRICAL
FEATURES
This series is UL recognized under Component Index,
file number E54214
Glass passivated chip junctions
Plastic materrial has U/L flammability classification
94V-O
M ECHANI CAL DAT A
M AXIMUM RAT ING S AND ELECTRICAL CHARACT ERI ST ICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
UNITS
Maximum recurrent peak reverse voltage V
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forw ard
output current @TA=25
Peak forw ard surge current
8.3ms single half-sine-w ave
superimposed on rated load
Maximum instantaneous forw ard voltage
@ 0.4 A V
Maximum reverse current @TA=25 μA
at rated DC blocking voltage @TA=100 mA
Typical junction capacitance per leg (NOTE 3) pF
Operating junction temperature range
Storage temperature range
NOTES: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
(2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
(3) Measured at 1.0 MHz and applied rev erse v oltage of 4.0 Volts
TSTG
TJ
VRRM
0.5
0.8
CJ13
IR
VF
IFSM
IF(AV)
35.0
VDC
VRMS
700
1000
280 420 560
400
SILICON BR IDGE R ECTIFIERS
Saves space on printed circuit boards
Weight: 0.0078 ounce, 0.22 gram
Polarity: Polarity symbols marked on body
Dimensions in inches and (millimeters)
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High surge overload rating: 30A peak
High temperature soldering guaranteed:
Mounting Position: Any
260°C/10 seconds at 5 lbs. (2.3kg) tension
VOLTAGE RANGE: 20 0 --- 1000 V
CURRE NT: 0 .5 A
5.0
M B2S --- MB1 0S
1000
0.95
140
200
A
MB2S MB10S
0.5
- 55 ---- + 150
- 55 ---- + 150
A
／Ｗ
800
800
600
TO-269AA
200
MB4S MB6S MB8S
400 600
Typical thermal resistance per leg (NOTE 1) RθJA 85
(NOTE 2) RθJL 20
0.1
1
0.01
1.4
10
1.2
0.8 1.00.4 0.60.2
TJ=25
PULSE WIDTH=300µS
110100
5.0
35
10
30
25
20
15
0
TＡ=４０
SINGLE HALF SINE-WAVE
(JEDEC Method)
1.0 CYCLE
f=60Hz
f=50Hz
.010
0.1
1.0
10
10080604020
100
TJ=25
TJ=125
RESISTIVE OR INDUCTIVE LOAD
GLASS
EPOXY
P.C.B.
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0 30 60 90 120 150
5.0
10
0.1 100
25
15
20
10
TJ=125℃
f=1.0MHz
Vsig=50mVp-p
1200
30
FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT PER LEG
INSTANTANEOUS FORWARD CURRENT,
AMPERES
AMPERES
MICRO AMPERES
FIG.1 -- DERATING CURVE FOR OUTPUT
RRECTIFIED CURRENT
CAPACITANCE, pF
RATINGS AND CHARACTERISTIC CURVES
TEMPERATURE,
M B2S -- MB10S
FIG.4 -- TYPICAL REVERSE CHARACTERISTIC
NUMBER OF CYCLES
REVERSE VOLTAGE, VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE
FIG.5 -- TYPICAL JUNCTION CAPACITANCE PER
BBBBBBB ELEMENT
INSTANTANEOUS REVERSE CURRENT,
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PEAK FORWARD SURGE CURRENT, AVERAGE FORWARD CURRENT, AMPERES
FIG.3 -- TYPICAL FORWARD VOLTAGE
KKKKCHARACTERISTICS PER LEG
BLGALAXY ELECTRICAL
www.galaxycn.com
Document Number 0287001 2.
