3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
• End-to-end stackable
• Offset dual-beam contact minimizes insertion force
• Expanded pin counts
• Protective Push-Cap
• Monoblockable
• Press or heat stake peg
• 12 mm modular units
• Meets global IEC 61076-4-104 Futurebus+® standard
• See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Date Modified: May12, 2010 TS-1115-C
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” (1.27 μm) Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating: Signal: 1.5 A - All contacts simultaneously
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1,000 V
AC
Environmental
Temperature Rating: -55° C to 125° C
Process Temperature Rating: 260°C (Prole per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
TS-1115-C
Sheet 2 of 4
Ordering Information
MP2 - SXXX - X1XX - X - XXXX
mm
(Inch)
Tolerance Unless Noted
0 0.0 0.00
mm ±3 ±0.3 ±0.13
( ) Dimensions used for
Reference Only
Termination Style
M = Solder Tail (Press Peg)
(press peg requiring arbor press for PCB assembly)
(Contact 3M Sales Rep)
P = Press Fit (w/ Tail Cover)
"A"
1.00
.039
12.45
.490
21.0
.83
11.80
.465
6.00
.236
2.00
.079
TYP.
13.50
.531
"C" TAIL LENGTH
9.30
.366
"B"
2.00
.079 TYP.
X1
2
4 ROW PRODUCT
"D" POST LENGTH
1.00
.039
8.00
.315
23.0
.91
12.45
.490
11.30
.445
13.80
.543
ROW
5 ROW PRODUCT
C
D
E
A
B
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated
through-hole (PTH) in a printed circuit board, typically a “back plane.”
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
REPRESENTATIVE
Contact Count
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Tail Length
(See Table 2)
C = Capped Solder Tail
Blank = Press-Fit
Plating Options:
(See Table 3)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
TS-1115-C
Sheet 3 of 4
Table 1 - Connector & Row Lengths
Pin
Count
Dim “A”
mm (Inch)
Dim “B”
mm (Inch) Rows Block
Count
024 11.95 [0.471] 10.00 [0.394] 4 1
048 23.95 [0.943] 22.00 [0.866] 4 2
072 35.95 [1.415] 34.00 [1.339] 4 3
096 47.95 [1.889] 46.00 [1.811] 4 4
120 59.95 [2.36] 58.00 [2.283] 4 5
144 71.95 [2.833] 70.00 [2.756] 4 6
168 83.95 [3.305] 82.00 [3.228] 4 7
192 95.95 [3.778] 94.00 [3.701] 4 8
030 11.95 [0.471] 10.00 [0.394] 5 1
060 23.95 [0.943] 22.00 [0.866] 5 2
090 35.95 [1.415] 34.00 [1.339] 5 3
120 47.95 [1.888] 46.00 [1.811] 5 4
150 59.95 [2.361] 58.00 [2.283] 5 5
180 71.95 [2.833] 70.00 [2.756] 5 6
210 83.95 [3.305] 82.00 [3.228] 5 7
240 95.95 [3.778] 94.00 [3.701] 5 8
Table 2 - Tail & Post Lengths
Contact-to-PC
Board Tail Termina-
tion Option No. Dim “C” Dim. “D”
Solder Press-Fit*
M1 2.72 [0.107] 3.57 [0.141]
M2 P1 3.53 [0.139] 3.57 [0.141]
*Compliant-Pin Tail
Table 3 - Plating
Plating Suffix Press-Fit Tails* Solder Tails Plating Composition
TG30 (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
TR30 (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
FJ (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
KR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
*Compliant-Pin Tail
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
TS-1115-C
Sheet 4 of 4
RECOMMENDED4ROWPCBHOLE
MOUNTINGPATTERN
RECOMMENDED5ROWPCBHOLE
MOUNTINGPATTERN
0.10
0.10
0.10
A1
"B"
2.00
.079
TYP.
6.00
.236
2.00
.079 3X
4.00
.157
3.00
.118
1.00
.039
4.00
.157
12.00
.472
"D" PLATEDTHRUHOLE
2.05 +.05
-.00
.081 +.002
-.000
UNPLATEDTHRUHOLE
1.50 +.10
-.00
.059 +.004
-.000
THESE HOLES CONSTITUTE MODULAR
REPEATING PATTERN
8.00
.315
2.00
.079
4X
“D” PLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
Ø
Ø
Ø
Ø
Ø
Table 4 -- HOLE PLATING For TG30 and TR30 FINISHES ONLY
HOLE Finished Dia.
mm [in]
Cu Thickness
mm [in]
SnPb Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
“D” 0.65-0.80 [.0256-.0315] 0.025 [.001] min 15 [600] max 0.81-0.86 [.0319-.0339]
Table 5 -- HOLE PLATING For KR and LR FINISHES ONLY
HOLE Finished Dia.
mm [in]
Cu Thickness
mm [in]
Immersion Matte Sn
Thickness
microns [μ”]
Electrolitic Au
Thickness
microns [μ”]
OSP ENTEK
Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
“D” 0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66 ] TWIST DRILL
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.