74ACT08SCX - ON SEMICONDUCTOR

74AC08, 74ACT08 — Quad 2-Input AND Gate

Publication Order Number:

74ACT08/D

November-2017, Rev.2

74AC08, 74ACT08

Quad 2-Input AND Gate

Features

■ICC reduced by 50% on 74AC only

■Outputs source/sink 24mA

General Description

The AC08/ACT08 contains four, 2-input AND gates.

Ordering Information

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.

All packages are lead free per JEDEC: J-STD-020B standard.

Connection Diagram

Pin Description

Logic Symbol

IEEE/IEC

Order

Number

Package

Number Package Description

74AC08SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

74AC08SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

74AC08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm

Wide

74AC08PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

74ACT08SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

74ACT08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm

Wide

74ACT08PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Pin Names Description

An, BnInputs

OnOutputs

www.onsemi.com

74AC08, 74ACT08 — Quad 2-Input AND Gate

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.

The absolute maximum ratings are stress ratings only.

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications. ON

Semiconductor does not recommend exceeding them or designing to absolute maximum ratings.

Symbol Parameter Rating

VCC Supply Voltage –0.5V to +7.0V

IIK DC Input Diode Current

VI = –0.5V –20mA

VI = VCC + 0.5 +20mA

VIDC Input Voltage –0.5V to VCC + 0.5V

IOK DC Output Diode Current

VO = –0.5V –20mA

VO = VCC + 0.5V +20mA

VODC Output Voltage –0.5V to VCC + 0.5V

IODC Output Source or Sink Current ±50mA

ICC or IGND DC VCC or Ground Current per Output Pin ±50mA

TSTG Storage Temperature –65°C to +150°C

TJJunction Temperature 140°C

Symbol Parameter Rating

VCC Supply Voltage

AC 2.0V to 6.0V

ACT 4.5V to 5.5V

VIInput Voltage 0V to VCC

VOOutput Voltage 0V to VCC

TAOperating Temperature –40°C to +85°C

∆V / ∆t Minimum Input Edge Rate, AC Devices:

VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V

125mV/ns

∆V / ∆t Minimum Input Edge Rate, ACT Devices:

VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V

125mV/ns

74AC08, 74ACT08 — Quad 2-Input AND Gate

DC Electrical Characteristics for AC

Notes:

1. All outputs loaded; thresholds on input associated with output under test.

2. Maximum test duration 2.0ms, one output loaded at a time.

3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.

Symbol Parameter

VCC

(V) Conditions

TA = +25°C TA = –40°C to +85°C

UnitsTyp. Guaranteed Limits

VIH Minimum HIGH Level

Input Voltage

3.0 VOUT = 0.1V or

VCC – 0.1V

1.5 2.1 2.1 V

4.5 2.25 3.15 3.15

5.5 2.75 3.85 3.85

VIL Maximum LOW Level

Input Voltage

3.0 VOUT = 0.1V or

VCC – 0.1V

1.5 0.9 0.9 V

4.5 2.25 1.35 1.35

5.5 2.75 1.65 1.65

VOH Minimum HIGH Level

Output Voltage

3.0 IOUT = –50µA 2.99 2.9 2.9 V

4.5 4.49 4.4 4.4

5.5 5.49 5.4 5.4

3.0 VIN = VIL or VIH,

IOH = –12mA

2.56 2.46

4.5 VIN = VIL or VIH,

IOH = –24mA

3.86 3.76

5.5 VIN = VIL or VIH,

IOH = –24mA(1)

4.86 4.76

VOL Maximum LOW Level

Output Voltage

3.0 IOUT = 50µA 0.002 0.1 0.1 V

4.5 0.001 0.1 0.1

5.5 0.001 0.1 0.1

3.0 VIN = VIL or VIH,

IOL = 12mA

0.36 0.44

4.5 VIN = VIL or VIH,

IOL = 24mA

0.36 0.44

5.5 VIN = VIL or VIH,

IOL = 24mA(1)

0.36 0.44

IIN(3) Maximum Input

Leakage Current

5.5 VI = VCC, GND ±0.1 ±1.0 µA

IOLD Minimum Dynamic

Output Current(2)

5.5 VOLD = 1.65V Max. 75 mA

IOHD 5.5 VOHD = 3.85V Min. –75 mA

ICC(3) Maximum Quiescent

Supply Current

5.5 VIN = VCC or GND 2.0 20.0 µA

www.onsemi.com

74AC08, 74ACT08 — Quad 2-Input AND Gate

DC Electrical Characteristics for ACT

Notes:

4. All outputs loaded; thresholds on input associated with output under test.

5. Maximum test duration 2.0ms, one output loaded at a time.

Symbol Parameter

VCC

(V) Conditions

TA = +25°C TA = –40°C to +85°C

UnitsTyp. Guaranteed Limits

VIH Minimum HIGH Level

Input Voltage

4.5 VOUT = 0.1V or

VCC – 0.1V

1.5 2.0 2.0 V

5.5 1.5 2.0 2.0

VIL Maximum LOW Level

Input Voltage

4.5 VOUT = 0.1V or

VCC – 0.1V

1.5 0.8 0.8 V

5.5 1.5 0.8 0.8

VOH Minimum HIGH Level

Output Voltage

4.5 IOUT = –50µA 4.49 4.4 4.4 V

5.5 5.49 5.4 5.4

4.5 VIN = VIL or VIH,

IOH = –24mA

3.86 3.76

5.5 VIN = VIL or VIH,

IOH = –24mA(4)

4.86 4.76

VOL Maximum LOW Level

Output Voltage

4.5 IOUT = 50µA 0.001 0.1 0.1 V

5.5 0.001 0.1 0.1

4.5 VIN = VIL or VIH,

IOL = 24mA

0.36 0.44

5.5 VIN = VIL or VIH,

IOL= 24mA(4)

0.36 0.44

IIN Maximum Input

Leakage Current

5.5 VI = VCC, GND ±0.1 ±1.0 µA

ICCT Maximum ICC/Input 5.5 VI = VCC – 2.1V 0.6 1.5 mA

IOLD Minimum Dynamic

Output Current(5)

5.5 VOLD = 1.65V Max. 75 mA

IOHD 5.5 VOHD = 3.85V Min. –75 mA

ICC Maximum Quiescent

Supply Current

5.5 VIN = VCC or GND 4.0 40.0 µA

www.onsemi.com

74AC08, 74ACT08 — Quad 2-Input AND Gate

AC Electrical Characteristics for AC

Note:

6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V.

AC Electrical Characteristics for ACT

Note:

7. Voltage range 5.0 is 5.0V ± 0.5V.

Capacitance

Symbol Parameter VCC (V)(6)

TA = +25°C,

CL = 50pF

TA = –40°C to +85°C,

CL = 50pF

UnitsMin. Typ. Max. Min. Max.

tPLH Propagation Delay 3.3 1.5 7.5 9.5 1.0 10.0 ns

5.0 1.5 5.5 7.5 1.0 8.5

tPHL Propagation Delay 3.3 1.5 7.0 8.5 1.0 9.0 ns

5.0 1.5 5.5 7.0 1.0 7.5

Symbol Parameter VCC (V)(7)

TA = +25°C,

CL = 50pF

TA = –40°C to +85°C,

CL = 50pF

UnitsMin. Typ. Max. Min. Max.

tPLH Propagation Delay 5.0 1.0 6.5 9.0 1.0 10.0 ns

tPHL Propagation Delay 5.0 1.0 6.5 9.0 1.0 10.0 ns

Symbol Parameter Conditions Typ. Units

CIN Input Capacitance VCC = OPEN 4.5 pF

CPD Power Dissipation Capacitance VCC = 5.0V 20.0 pF

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

www.onsemi.com

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative

❖