Reed Sensors Flange Mounting Sensor > 59105 59105 Terminal Flange Sensor + 57105 Actuator Description The 59105 is a flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.250") with an integral two-pin connector. It has choices of normally open, normally open high voltage or normally closed contacts and it's case design enables screw or adhesive mounting. It is capable of switching up to 265Vac/300Vdc at 10VA. The 59105 functions best with the matching actuator 57105-000. Actuator Sensor Note: The 57105 Actuator is sold separately. Features * Two-part magnetically operated proximity sensor * Shrouded terminals accept Molex SL series connector Agency Approvals Agency * Case design allows screw down or adhesive mounting * Customer-defined sensitvity option Agency File Number Benefits E61760 * Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Note: Contact Littelfuse for specific agency approval ratings. Dimensions * No standby power requirement * Operates through non-ferrous materials such as wood, plastic or aluminium Dimensions in mm (inch) Actuator 14.28 (.560) Applications 28.57 (1.125) 6.35 (.250) 9.53 (.375) Actuator * Linear actuators * Industrial process control 19.05 (.75) 3.18x7..82 (.125x.308 LG) SLOT 2 15.88 (.625) 3.43 (.135) 11.6 (.457) Sensor 28.57 (1.125) 14.28 (.560) * Position and limit sensing * Security system switch 2.54 (.100) 6.35 (.250) 2.54 (.100) 7.3 (.287) Sensor 9.53 (.375) 19.05 (.75) 3.18x7..82 (.125x.308 LG) SLOT 2 15.88 (.625) Schematics 3.43 (.135) Switch Type Black Black Black Blue White Black Black (c) 2017 Littelfuse Revised: 12/18/17 Specifications are subject to change without notice. 1 and 2 3 4 littelfuse.com Reed Sensors Flange Mounting Sensor > 59105 59105 Terminal Flange Sensor + 57105 Actuator Electrical Ratings Contact Type Normally Open Normally Open High Voltage Normally Closed 1 2 4 Switch Type VA/Watt - max. 10 10 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 Contact, Initial Insulation - max. - min. 0.2 1010 0.2 1010 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 Temperature Operating C -40 to +105 -20 to +105 -40 to +105 Contact Rating Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 ms - max. 1.0 1.0 3.0 Release Time 6 ms - max. 1.0 1.0 3.0 11ms 12 sine G - max. 100 100 50 50-2000 Hz G - max. 30 30 30 Shock 7 Vibration 7 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57105 Actuator) Select Option Switch Type 1 Normally Open 2 High Voltage 4 Normally Closed S T U V Distance - D Pull-In Activate Distance - D Pull-In Activate Distance - D Pull-In Activate Distance - D Pull-In Activate mm (inch) mm (inch) mm (inch) mm (inch) AT Range AT Range AT Range AT Range Average Average Average Average 12-18 12.5 (.492) 17-23 11.3 (.445) 22-28 9.8 (.385) 27-33 8.9 (.350) -- -- 17-23 11.3 (.445) 22-28 9.8 (.385) 27-33 8.9 (.350) 15-20 8.0 (.315) 20-25 7.2 (.283) 25-30 5.9 (.233) -- -- Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. 2. The activation distance is average value on the final sensor assembly (c) 2017 Littelfuse Revised: 12/18/17 Specifications are subject to change without notice. Sensor Actuator D littelfuse.com Reed Sensors Flange Mounting Sensor > 59105 59105 Terminal Flange Sensor + 57105 Actuator Part Numbering System Sensor: 59105 - X - X - 00 - 0 Actuator: Series Series Switch Type 1, 2, or 4 Standard Actuator 000 Sensitivity S, T, U, or V 57105 - 000 Note: The 57105 Actuator is sold separately. Packaging Packaging Option Packaging Specification Bulk Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics. (c) 2017 Littelfuse Revised: 12/18/17 Specifications are subject to change without notice. littelfuse.com