DATA SHEET PHOTOCOUPLER PS2701A-1 HIGH ISOLATION VOLTAGE SOP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS2701A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light. It is designed for high density mounting applications. FEATURES * Lead-free product: Solder plating specification Sn-Bi PIN CONNECTION (Top View) * High isolation voltage (BV = 3 750 Vr.m.s.) * SOP (Small Outline Package) type 4 3 * Ordering number of taping product: PS2701A-1-F3, F4 * Safety standards * UL approved: File No. E72422 1 2 1. Anode 2. Cathode 3. Emitter 4. Collector * DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS * Hybrid IC * Measuring instruments * Power supply * Programmable logic controllers The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PN10396EJ01V0DS (1st edition) Date Published May 2004 CP(K) Printed in Japan NEC Compound Semiconductor Devices 2003, 2004 PS2701A-1 PACKAGE DIMENSIONS (in millimeters) PS2701A-1 1 2 7.00.3 4.4 0.15 +0.10 -0.05 3 2.0 4 0.10.1 2.10.2 4.00.5 2.54 0.50.3 0.4 +0.10 -0.05 0.25 M MARKING EXAMPLE No. 1 pin Mark 701A N301 Assembly Lot *1 N 3 01 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code *1 Bar : Lead Free Remarks "PS2" and "-1" are omitted from original type number 2 Data Sheet PN10396EJ01V0DS PS2701A-1 ORDERING INFORMATION Part Number PS2701A-1 Package Safety Standards Solder Plating Approval Specification Magazine case 100 pcs Standard products Embossed Tape 3 500 pcs/reel (UL approved) PS2701A-1-V Magazine case 100 pcs DIN EN60747-5-2 PS2701A-1-V-F3 Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2701A-1-F3 4-pin SOP Packing Style Sn-Pb Application Part *1 Number PS2701A-1 PS2701A-1-F4 PS2701A-1-V-F4 Approved (Option) PS2701A-1-A Magazine case 100 pcs Standard products PS2701A-1-F3-A Embossed Tape 3 500 pcs/reel (UL approved) PS2701A-1-V-A Magazine case 100 pcs DIN EN60747-5-2 PS2701A-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) Sn-Bi PS2701A-1-F4-A PS2701A-1-V-F4-A Approved (Option) *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10396EJ01V0DS 3 PS2701A-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 30 mA Reverse Voltage VR 6 V PD/C 0.8 mW/C PD 80 mW IFP 0.5 A Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V IC 30 mA PC/C 1.5 mW/C PC 150 mW BV 3 750 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Diode Power Dissipation Derating Power Dissipation *1 Peak Forward Current Transistor Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output 4 Data Sheet PN10396EJ01V0DS PS2701A-1 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO IF = 0 mA, VCE = 70 V Coupled Current Transfer Ratio CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.2 1.4 V 5 A 10 50 pF 100 nA 300 % 0.3 V *1 (IC/IF) Rise Time Fall Time *2 tr *2 VCC = 5 V, IC = 2 mA, RL = 100 tf 0.13 10 11 0.4 pF 5 s 7 *1 CTR rank N: 50 to 300 (%) P: 150 to 300 (%) L: 100 to 300 (%) M: 50 to 150 (%) *2 Test circuit for switching time Pulse input VCC PW = 100 s, Duty cycle = 1/10 IF 50 VOUT RL = 100 Data Sheet PN10396EJ01V0DS 5 PS2701A-1 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 0.8 mW/C 80 60 40 20 0 0 25 50 75 100 100 50 0 0 75 100 125 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 TA = +100C +60C +25C 5 0C -25C -55C 1 0.5 IF = 10 mA 25 20 15 5 mA 10 2 mA 5 1 mA 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 0 1.5 2 4 6 8 10 Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 000 10 IF = 10 mA 5 mA Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 50 FORWARD CURRENT vs. FORWARD VOLTAGE Forward Voltage VF (V) VCE = 24 V 1 000 VCE = 70 V 100 10 1 0 25 50 75 100 2 mA Remark 1 mA 1 0.1 Ambient Temperature TA (C) 6 25 Ambient Temperature TA (C) Collector Current IC (mA) Forward Current IF (mA) 150 Ambient Temperature TA (C) 10 0.1 0.05 0.7 1.5 mW/C 125 100 50 200 0 0.2 0.4 0.6 0.8 Collector Saturation Voltage VCE (sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10396EJ01V0DS 1.0 PS2701A-1 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.2 Current Transfer Ratio CTR (%) 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V 0.2 90% 300% 0 -75 -50 -25 0 100 Switching Time t ( s) 300 25 50 75 250 VCE = 5 V, n=3 200 Sample A B C 150 100 50 0 0.01 100 0.1 1 10 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IC = 2 mA, VCC = 5 V, CTR = 236 % IF = 5 mA, VCC = 5 V, CTR = 236 % tf tr Switching Time t ( s) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 10 td ts 1 tf 100 ts 10 tr 0.1 10 100 1 000 td 1 1 10 000 Load Resistance RL () 10 100 Load Resistance RL (k) LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 5 1.2 0 1.0 -5 100 -10 300 -15 RL = 1 k -20 1 10 0.8 TA = 25C 0.6 100 1 000 0 10 Frequency f (kHz) Remark TA = 60C 0.4 0.2 IF = 5 mA, VCE = 5 V -25 0.1 CTR (Relative Value) Normalized Gain GV IF = 5 mA (TYP.) 102 103 104 105 Time (Hr) The graphs indicate nominal characteristics. Data Sheet PN10396EJ01V0DS 7 PS2701A-1 TAPING SPECIFICATIONS (in millimeters) 1.550.1 2.9 MAX. 7.40.1 5.50.05 1.5+0.1 -0 12.00.2 2.00.05 4.00.1 1.750.1 Outline and Dimensions (Tape) 2.40.1 4.60.1 0.3 8.00.1 Tape Direction PS2701A-1-F3 PS2701A-1-F4 Outline and Dimensions (Reel) 21.00.8 13.00.2 R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 13.51.0 17.51.0 11.9 to 15.4 Outer edge of flange Packing: 3 500 pcs/reel 8 Data Sheet PN10396EJ01V0DS PS2701A-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. Data Sheet PN10396EJ01V0DS 9 PS2701A-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 10 Data Sheet PN10396EJ01V0DS PS2701A-1 * The information in this document is current as of May, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PN10396EJ01V0DS 11 PS2701A-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0401