BusBoard Prototype Systems -
Built for designers
www.BusBoard.com sales@busboard.com BPS-DAT-(BB2)-001 Rev 4.00
© 2014 BusBoard Prototype Systems Ltd. All rights reserved. BusBoard is a trademark of BusBoard Prototype Systems Ltd.
AdapterBoard SOIC32+SSOP32
Adapter Board for SOIC and SSOP ICs, Up to 32 Pins
Features
This AdapterBoard connect SOIC or SSOP
integrated circuits to DIP-32 pins to allow them
to be used with solderless breadboards or thru-
hole prototyping boards.
Dual-usage adapter. The board has a SOIC-32
footprint on the top (0.050” pin pitch) and a
SSOP-32 (0.65mm pin pitch) footprint on the
bottom. The SOIC pads can be used for narrow
or wide packages (up to 0.500” pin-to-pin).
Multiple smaller SOICs can be installed.
Bonus SMT pads allow other components to be
added on square 0.050” pads. Vias allow
connection to SMT pads on other side. Tracks
under SOIC-32 connect left and right SMT pads
to carry signals. These can be used to add
decoupling capacitors to the IC when the power
and ground pins are at opposite ends.
Specifications
Dual usage SOIC-32 (0.050” pin pitch) or
SSOP-32 (0.65mm pin pitch) adapter
Two 1x16 headers provided (not soldered).
DIP-32 rows are 0.6” apart.
DIP-32 holes are drilled on 0.1" (2.54mm)
centers. 0.037" (0.94mm) holes sized for
square post headers.
Size = 0.700 x 1.600in, 1/16" thick (1.6mm)
Etched FR4 glass-epoxy circuit board.
Solder mask to prevent solder bridges.
Double-sided, 1oz/ft2 copper, anti-tarnish
coating for easy soldering. Lead free and
RoHS compatible.
Order Part# AB-SOIC32+SSOP
Photos
SOIC Side SSOP Side
Tracks Connecting
SMT Bonus Pads
AdapterBoard SOIC32+SSOP32
BusBoard Prototype Systems -
Built for designers
www.BusBoard.com sales@busboard.com BPS-DAT-(AB-SOIC32+SSOP)-0001 Rev 4.00 Datasheet.doc
© 2014 BusBoard Prototype Systems Ltd. All rights reserved. AdapterBoard is a trademark of BusBoard Prototype Systems Ltd.
Dimensions
