Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm Plugs, Crimp Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. 14.53 [.572] Dia. Max. Style Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. TEFLON Mil Type 33.33 1.312 69245-4 -- 269471-1 2330876-0 Nickel Polyethylene Commercial -- 358436-3 -- 2-221128-1 Gold Nickel Polyethylene Commercial 220009-5 318450-2 220217-3 1-227079-6 O Crimp Gold Nickel Polyethylene Economy -- 58559-1 -- 414852-3 O Crimp Gold Nickel Polyethylene Economy -- -- -- 414915-35 O Crimp Gold Nickel TEFLON Mil Type 220009-1 -- 220026-1 225395-7 O Crimp Gold Silver TEFLON Mil Type 220009-1 -- 220026-1 2-331350-4 Single Crimp Gold Silver TEFLON Mil Type 69245-2 -- 269422 2-330061-1 Hex Crimp Gold Nickel Polyethylene Commercial -- 358436-3 -- 2-221128-3 O Crimp Gold Nickel Polyethylene Commercial 220009-5 318450-2 220217-3 2-227079-2 O Crimp Gold Nickel TEFLON Mil Type 220009-1 -- 220026-1 225395-8 O Crimp Gold Silver TEFLON Mil Type 220009-1 -- 220026-1 2-331350-5 69245-1 -- 269408 2-329446-1 69477-4 358539-1 -- 8-227079-2 69477-2 -- 269669-2 5-225395-7 -- 158436-3 -- 2-221128-5 69477-2 -- 269669-2 -- 158436-1 220187-1 RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric 178, 178A, 178B, 196, 196A Single Crimp Gold Silver Hex Crimp Gold O Crimp Single Crimp Gold Silver TEFLON Mil Type RD 316, 188, Double Braid Belden 9252, 122 O Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel TEFLON Mil Type 180, 180A, C1180B, 195, 195A Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel TEFLON Mil Type Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Commercial 33.53 1.320 27.69 1.090 27.69 1.090 27.69 1.090 30.18 1.188 30.18 1.188 33.33 1.312 33.53 1.320 27.69 1.090 -30.18 1.188 30.18 1.188 33.33 1.312 27.69 1.090 38.10 1.500 33.53 1.320 35.44 1.395 33.53 1.320 27.69 1.090 O Crimp Gold Nickel Polyethylene Commercial 27.69 1.090 O Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel TEFLON Mil Type 27.69 1.090 30.18 1.188 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, Belden 9221 Belden 8219 Belden 9907, 89907 Comm/ Scope 2104 Belden 8218 L Max. 225395-9 -- 2-221128-7 158435-11 220217-1 6-227079-73 220187-1 318452-2 220217-1 6-227079-84 69477-4 158539-1 258376-1 1-227079-9 69477-2 -- 269669-2 1-225395-0 2 Order AMP PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Order AMP PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. For use with Belden 9907, Comm/Scope 3104, Belden 8219 only. 4 For use with Belden 89907, Comm/Scope 2104 only. 5 Kit includes connector subassembly and ferrule only, center contact part no. 1-414724-0 supplied separately on strip. Terminate with Amp-o-lectric terminating machine 220152-1 with applicator. 1 2 3 44 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. RG/U Cable 58, 58A, 58B, 58C Termination Type Center Contact Plating Body Plating Dielectric Style Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Commercial O Crimp Silver Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Economy O Crimp Gold Nickel Polyethylene Economy O Crimp Gold Nickel TEFLON Mil Type O Crimp Gold Silver TEFLON Mil Type Single Crimp Gold Silver TEFLON Mil Type 141, 141A, 303 O Crimp Gold Nickel TEFLON Mil Type Belden 88240, Berk-Tek BTDC-58, Comm/ Scope 2135 Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Commercial 223, 55, 55A, 55B O Crimp Gold Nickel TEFLON Mil Type O Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel TEFLON Mil Type Single Crimp Gold Silver TEFLON Mil Type O Crimp 142, 142A, 142B, 400 O Crimp Gold Gold Nickel Nickel Polyethylene TEFLON Commercial Mil Type O Crimp Gold Silver TEFLON Mil Type Single Crimp Gold Silver TEFLON Mil Type 14.53 [.572] Dia. Max. Dim. L 33.53 1.320 27.69 1.090 27.69 -1.090 27.69 1.090 27.69 1.090 33.74 1.328 33.74 1.328 33.33 1.312 30.18 1.188 33.53 1.320 33.33 1.312 33.33 1.312 27.69 1.280 43.64 1.718 33.33 1.312 27.69 1.090 30.18 1.188 30.18 1.188 33.33 1.312 L Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 -- 158436-12 -- 221128-13 220187-1 158435-11 220217-1 227079-5 220187-1 158435-11 220217-1 227079-9 58558-1 -- 414852-1 -- -- -- 414915-14,5 269478-1 220189-3 269727-1 225395-1 269478-1 220189-3 269727-1 2-331350-1 269140-1 -- 269223-1 2-329444-1 269478-1 220189-3 269727- 225395-5 -- 158436-12 -- 1-221128-0 220187-1 158435-11 220217-1 4-227079-3 269478-1 220189-3 269727 4-225395-2 220187-1 158435-1 220217-1 227079-6 269478-1 220189-3 269727- -225395-3 269140-2 -- 269424 2-329444-2 220187-1 258435-11 220217-1 6-227079-1 -225395-6 -- 269478-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. 1 1 Part No. Head 318161-1 220189-3 269727 269478-1 220189-3 269727- 2-331350-9 269331-1 -- 269429-1 2-330358-2 Consult AMP for recommended crimp tooling. 1 Order AMP PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2 Order AMP PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3 Bulk packaged. 4 Kit includes connector subassembly and ferrule only, center contact part no. 414724-2 supplied separately on strip. 5 Terminate with Amp-o-lectric terminating machine 220152-1 with applicator. Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 45 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. RG/U Cable 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, Belden 9291, 9209, 9269 302, Belden 88241, 89269, Hi-Temp 62A, Times PL62, Berk-Tek, BTDC-59, BTDC-62 Hi-Temp 59, Times PL59, PLF59 (20 AWG C.C.) Belden 9104, 9240, 9112, 9167, 9259, 9266, Times FM-59 Belden 9248, 9114 Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Silver TEFLON Mil Type Single Crimp Gold Silver TEFLON Mil Type Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel TEFLON Mil Type 33.53 1.320 27.69 1.090 27.69 1.090 27.69 1.090 27.69 1.090 30.18 1.188 30.18 1.188 33.33 1.312 33.53 1.320 33.33 1.312 34.14 1.344 O Crimp Gold Nickel Polyethylene Commercial Hex Crimp Gold Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Commercial O Crimp Silver Nickel Polyethylene Commercial O Crimp Gold Nickel Polyethylene Economy O Crimp Gold Nickel Polyethylene Economy O Crimp Gold Nickel TEFLON Mil Type O Crimp O Crimp O Crimp Hex Crimp Belden 8281, 9141, 9231, Western Electric 724, 728, 3049 14.53 [.572] Dia. Max. O Crimp Gold Gold Gold Gold Gold Nickel Nickel Nickel Nickel Nickel Polyethylene TEFLON Polyethylene Polyethylene Polyethylene Commercial Mil Type Commercial Commercial Commercial O Crimp Gold Silver TEFLON Mil Type Single Crimp Gold Silver Polypropylene Mil Type 8, 8A, 213 O Crimp Gold Silver TEFLON Mil Type 11, 11A O Crimp Gold Silver TEFLON Mil Type Belden 9914, Times FM-8 Alpha 9847, Belden 8213, 9292 9, 9A, 9B, 214 O Crimp Gold Silver TEFLON Mil Type O Crimp Gold Silver TEFLON Mil Type O Crimp Gold Silver TEFLON Mil Type L Max. Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 258436-12 -- 1-221128-1 220187-2 258435-11 220217-2 227079-7 220187-2 258435-11 220217-2 1-227079-1 58558-1 -- 414852-2 -- -- 414915-2 3,4 CERTI-CRIMP Hand Tool with Integral Die -- 2 -- 269477-1 58537-1 -- 225395-2 269477-1 -- 269669-1 331350-0 269141-1 -- -- 220187-2 2 -- 2-329445-1 2 258436-1 -- 1-221128-1 258435-1 1 220217-2 4-227079-9 58537-1 269669-1 4-225395-1 58537-1 -- 5-227079-3 258436-12 -- 1-221128-7 -- 1-227079-3 269669-1 2-225395-0 -- 3-227079-0 -- 1-221128-2 220088-1 5-227079-8 269477-1 2 33.33 1.312 -- 2 33.53 1.320 27.69 1.090 30.94 1.218 27.69 1.090 33.53 1.320 31.75 1.250 38.10 1.500 41.50 1.634 27.31 1.075 47.63 1.875 47.63 1.875 47.63 1.875 52.38 2.062 -- 2 220187-2 58537-1 2 269477-1 58537-1 2 220247-1 58539-1 2 -- 58436-2 2 220043-1 58538-1 2 220043-1 58538-1 220088-1 4-331350-0 69652- -- 220000- 330878-0 220015-1 -- -- -225886-1 220015-1 -- -- 225886-4 220015-1 -- -- 225886-7 220015-1 -- -- 225886-5 220015-1 -- -- 225886-1 Order AMP PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Order AMP PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. AMP PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 3 Kit includes connector sub assembly and ferrule only, center contact part no. 414724-4 supplied separately on strip. 4 Terminate with Amp-o-lectric terminating machine 220152-1 with applicator. 1 2 2 46 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Solder/Clamp Standard Push-On H 14.3 [.563] 13.67 [.538] Ref. L Max. L Max. H = 12.7 [.500] Max. across flats, 14.74 [.580] Max. across points. 9.65-9.78 [.380/.385] Dia. RG/U Cable RG174A/U, RG188A/U, RG316/U, URM95 RG179B/U, RG187A/U, URM111 Center Contact Plating Body Plating Dielectric Style M/A-COM Model No. Dim. L Part No. Gold Silver TEFLON Mil Type B35A70E022X 1310700-1 Gold Nickel TEFLON Mil Type B35A70J022X Gold Silver TEFLON Mil Type B37A70E022X Gold Silver TEFLON Mil Type B35A70E010X 28.5 1.122 28.5 1.122 28.5 1.122 28.5 1.122 28.5 1.122 26.04 1.025 28.5 1.122 28.5 1.122 28.5 1.122 28.5 1.122 38.1 1.500 38.1 1.500 28.5 1.122 28.5 1.122 28.5 1.122 Maximum PC Board Thickness 2.11 [.083] RG58C/U, RG141A/U, URM43, URM76 Recommended Panel Cutout for Push-On Style Gold Nickel TEFLON Mil Type B35A70J010X 58, 58A, 58B, 58C Gold Nickel TEFLON Push-On -- RG55B/U, RG142B/U, RG223/U, RG400/U, URM301 Gold Silver TEFLON Mil Type B35A70E060X Gold Nickel TEFLON Mil Type B35A70J060X Gold Silver TEFLON Mil Type B37A70E025X Gold Nickel TEFLON Mil Type B37A70J025X Gold Silver TEFLON Mil Type B35A03E001X Gold Nickel TEFLON Mil Type B35A03J001X RG59B/U, RG62A/U, RG140/U, TM3304 PSF1/4(BBC), RG8A/U, RG213/U, URM67 URM70 Gold Silver TEFLON Mil Type B37A70E012X BT2003, BT2003A Gold Silver TEFLON Mil Type B37A70E062X BT2002 Gold Silver TEFLON Mil Type B37A70E117X 1310705-1 1311685-1 1310697-1 1310702-1 222728-1 1312559-1 1311674-1 1310776-1 1310777-1 1314882-1 1310690-1 1310775-1 1314874-1 1314875-1 Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes. Mating Twist-On Jack -- Page 51 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 14.53 [.572] Dia. Max. RG/U Cable 58, 58B 59, 59A, 59B Belden 8281, 9141, 9231, Western Electric 724, 728, 3049 38.10 [1.500] Contact Plating Body Plating Dielectric Style Part No. Gold Nickel Commercial 414265-7 Gold Nickel Polymethylpentene Polymethylpentene Commercial 414265-3 Gold Nickel Polymethylpentene Commercial 414265-5 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 47 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right Angle Plugs, Crimp Single Crimp Hex and O Crimp 26.57 [1.046] 26.57 [1.046] L Max. L Max. 14.53 [.572] Dia. Max. RG/U Cable Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Polymethylpentene Commercial -- 258436-3 -- 413959-3 269245-1 -- 269422 331178-0 -- 258436-3 -- 413959-4 Single Crimp Gold Silver TEFLON Mil Type Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 RD 316 Hex Crimp Gold Nickel -- -- 58, 58A, 58B, 58C 55, 55A, 55B, 223 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, Belden 9291, 9209, 9269 Interchangeable Dies for PRO-CRIMPER Interchangeable Hand Tool 354940-1 Dies for Hand or Tool 69710-1 PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 Termination Type 179, 179A, 179B, 161, 187, 187A, Belden 9221 180, 180A, 180B, 195, 195A Belden 9907, 89907, 8219, Comm/Scope 2104, 3104 CERTI-CRIMP Hand Tool with Integral Die Center Contact Plating 39.45 1.553 44.45 1.750 174, 188, 188A, 316 48 14.53 [.572] Dia. Max. Part No. -- -- 220026-1 413959-7 Commercial 39.45 1.553 39.45 1.553 -- 258436-3 -- 413959-5 Hex Crimp Gold Nickel Polymethylpentene Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 -- 258436-1 -- 413959-6 Hex Crimp Gold Nickel Polymethylpentene Commercial -- 258436-1 -- 413959-1 O Crimp Gold Nickel TEFLON Mil Type 269478-1 220189-3 269727-1 225974-1 Single Crimp Gold Silver TEFLON Mil Type 269140-1 -- 269223-1 331175-0 O Crimp Gold Nickel TEFLON Mil Type 269478-1 220189-3 269727-1 225974-2 Single Crimp Gold Silver TEFLON Mil Type 269140-2 -- 269429-1 331182-0 O Crimp Gold Silver TEFLON Mil Type 269478-1 220189-3 269727-1 225973-4 Single Crimp Gold Silver TEFLON Mil Type 39.45 1.553 37.29 1.468 44.45 1.750 37.29 1.468 44.45 1.750 37.29 1.468 44.45 1.750 269331-1 -- 269429-1 331182-0 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 -- 258436-1 -- 413959-2 O Crimp Gold Nickel TEFLON Mil Type 37.29 1.468 269477-1 258537-1 269669-1 225974-5 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right Angle Plugs, Solder/Clamp 29.2 [1.150] 14.3 Dia. [.563] Max. 28.0 [1.102] Part No. 1310707-1 RG/U Center Contact Cable Plating RG174A/U, RG188A/U, Gold RG316U, URM95 Gold RG58C/U, RG141A/U, URM43, URM76 Gold RG59B/U, RG62A/U, Gold RG140/U URM70 Gold Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] Body Plating Dielectric Style M/A-COM Model No. Part No. Silver TEFLON Mil Type B35B02E022X 1328427-1 Silver Nickel TEFLON TEFLON Mil Type Mil Type B35B02E010X B35B02J010X 1310707-1 1310712-1 Silver TEFLON Mil Type B37B02E025X 1328481-1 Silver TEFLON Mil Type B37B02E012X 1310778-1 www.amp.com/communications/com Specifications subject to change. 49 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Crimp Single Crimp 11.1 [.437] Dia. Max. RG/U Cable 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, Belden 9221 180, 180A, 180B, 195, 195A Belden 89907, 9907, 8219, Comm/Scope 3104, 2104 58, 58A, 58B, 58C 58, 58A, 58B, 58C Belden 88240, BerkTek BTDC-58 Comm/Scope 2135 223, 55, 55A, 55B 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, Belden 9291, 9209, 9269 Termination Type Center Contact Plating Body Plating Hex and O Crimp 11.08 [.436] Dia. Max. L Max. Dielectric Style Hex Crimp Gold Nickel O Crimp Gold Nickel Polymethylpentene Polypropylene O Crimp Gold Nickel TEFLON Mil Type Single Crimp Gold Silver TEFLON Mil Type Commercial Commercial Commercial Dim. L 33.02 1.300 30.48 1.200 30.48 -1.200 33.33 1.312 -33.02 1.300 30.48 1.200 L Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 -- 258436-3 -- 413779-3 220009-5 -- 220217-3 228979-7 220009-1 -- 220026-1 225396-7 69245-2 -- 69422 2-330062-1-1 -- 258436-3 -- 413779-4 220009-1 -- 220026-1 225396-8 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Part No. Head 318161-1 Hex Crimp Gold Nickel Polymethylpentene O Crimp Gold Nickel TEFLON Mil Type Hex Crimp Gold Nickel Polymethylpentene Commercial 33.02 1.300 -- 258436-3 -- 413779-5 Hex Crimp Gold Nickel Polymethylpentene Commercial 33.02 1.300 -- 258436-1 -- 413779-6 O Crimp Gold Nickel Polypropylene Commercial 220187-1 258435-11 220217-1 228979-5 269478-1 220189-3 269727- 225396-11 269478-1 220189-3 269727-1 2-331351-1 269140-1 -- 269223-1 2-329545-1 Single Crimp Gold Silver TEFLON Mil Type 30.48 1.200 30.48 1.200 30.48 1.200 33.33 1.312 Hex Crimp Gold Nickel Polymethylpentene Commercial 33.02 1.300 -- 258436-1 -- 413779-1 Single Crimp Gold Silver TEFLON Mil Type 269140-2 -- 269424- 2-329452-21 Polymethylpentene Polypropylene Commercial 33.33 1.312 33.02 1.300 30.48 1.200 30.48 1.200 30.48 1.200 33.33 1.312 -- 258436-1 -- 413779-2 220187-2 258435-11 220217-2 -228979-6 269477-1 258537-1 269669-1 225396-2 269477-1 -- 269669-1 331351 269141-1 -- 269224-1 2-329549-1 O Crimp O Crimp Gold Gold Nickel Silver Hex Crimp Gold Nickel O Crimp Gold Nickel O Crimp Gold Nickel O Crimp Single Crimp Gold Gold Silver Silver TEFLON TEFLON TEFLON TEFLON TEFLON Mil Type Mil Type Commercial Mil Type Mil Type Mil Type Order AMP PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 1 50 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Solder/Clamp 14.3 Dia. [.563] RG/U Cable RG58C/U, RG141A/U, URM43, URM76 33.3 Dia. [1.311] Max. Center Contact Plating Body Plating Dielectric Style M/A-COM Model No. Part No. Gold Silver TEFLON Mil Type B35E60E010X 1327037-1 Gold Nickel TEFLON Mil Type B35E60J010X 1310970-1 Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. 40.14 Max. [1.580] Mating Twist-On Plug -- Page 47 RG/U Cable 58,58B 59, 59A, 59B Center Contact Gold Gold Body Plating Nickel Nickel Dielectric Style Part No. Acetal Acetal Commercial Commercial 222428-7 222428-1 Panel Jacks, Crimp 11.2 [.441] Dia. 12.7 0.1 [.500 .004] 17.84 Max. [.702] 12.7 0.1 [.500 .004] 28.96 [1.140] Max. 2.77 Dia. [.109] Recommended Panel Cutout RG/U Cable Termination Type Center Contact Plating 174, 188, 188A, 316 RD 316, 188 58, 58A, 58B, 58C 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, Belden 9291, 9209, 9269, 89269 O Crimp O Crimp O Crimp Gold Gold Gold Nickel Nickel Nickel TEFLON TEFLON TEFLON Mil Type Mil Type Mil Type 220009-1 220009-1 -69478-1 Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 -- -- 220189-3 O Crimp Gold Nickel TEFLON Mil Type -69477-1 258537-1 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Body Plating Dielectric Style CERTI-CRIMP Hand Tool with Integral Die Dimensions are in millimeters over [inches] www.amp.com/communications/com Interchangeable Dies for Hand Tool 69710-1 Part No. & 626 Pneu. Head 318161-1 220026-1 220026-1 69727- 225397-7 1-225397-4 225397-1 269669-1 225397-2 Specifications subject to change. 51 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Single Crimp Hex and O Crimp Note: Panel Insulating Bushings -- Page 54 H H L Max. L Max. +0.13 12.83 -0.00 Dia. [.505 +.005 ] 12.82 [.505] Dia. Min. Recommended Panel Cutouts -.000 11.04 [.435] Min. Maximum Panel Thickness 3.18 [.125] +0.08 5.54 -0.00 [.218 +.003 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points Dielectric Style Dim. L Interchangeable Dies for PRO-CRIMPER Interchangeable Hand Tool 354940-1 Dies for Hand Part No. or Tool 69710-1 PRO-CRIMPER & 626 Pneu. Adapter 679304-1 Head 318161-1 RG/U Cable Termination Type 178, 178A, 178B, 196, 196A Single Crimp Gold Silver TEFLON Mil Type 32.13 1.265 2 69245-4 -- 269471- Hex Crimp Gold Nickel Commercial -- 58436-3 -- 413771-3 O Crimp Gold Nickel Polymethylpentene Polypropylene 220009-5 -- 220217-3 228980-7 O Crimp Gold Nickel TEFLON Mil Type 220009-1 -- 220026-1 225398-7 O Crimp Gold Silver TEFLON Mil Type 220009-1 -- 220026-1 1-331693-2 Single Crimp Gold Silver TEFLON Mil Type 269245-2 -- 269422- 2-330063-1 Commercial -- 58436-3 -- 413771-4 Mil Type 220009-1 -- 220026-1 225398-8 269245-1 -- 269408- 2-329458-1 269477-2 -- 269669-2 1-225398-5 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, Belden 9221 Times RD316 180, 180A, 180B, 195, 195A Belden 9907, 89907, 8219, Comm/Scope 2104, 3104 52 Body Plating CERTI-CRIMP Hand Tool with Integral Die Center Contact Plating 331974 Single Crimp Gold Silver TEFLON Mil Type O Crimp Gold Nickel TEFLON Mil Type 36.83 1.450 34.93 1.375 35.71 1.406 35.71 1.406 32.13 1.265 36.83 1.450 35.71 1.406 32.13 1.265 35.71 1.406 Hex Crimp Gold Nickel Polymethylpentene Commercial 36.83 1.450 -- 58436-3 -- 413771-5 Hex Crimp Gold Nickel Polymethylpentene Commercial 36.83 1.450 -- 58436-1 -- 413771-6 Hex Crimp Gold Nickel Polymethylpentene O Crimp Gold Nickel TEFLON Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Commercial Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp (Continued) Single Crimp Hex and O Crimp Note: Panel Insulating Bushings -- Page 54 L Max. H H L Max. +0.13 12.83 -0.00 Dia. [.505 +.005 ] 12.82 [.505] Dia. Min. Recommended Panel Cutouts -.000 11.04 [.435] Min. Maximum Panel Thickness 3.18 [.125] +0.08 5.54 -0.00 [.218 +.003 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points Style CERTI-CRIMP Hand Tool with Integral Die Polymethylpentene Commercial 36.83 1.450 -- 258436-1 -- 413771-1 Nickel Polypropylene Commercial 220187-1 0158435-11 220217-1 228980-5 Gold Nickel TEFLON Mil Type 269478-1 220189-3 269727-1 225398-1 Gold Silver TEFLON Mil Type 34.93 1.375 41.28 1.625 32.13 1.265 35.71 1.406 35.71 1.406 36.83 1.450 1-34.93 1.375 41.28 1.625 269140-1 -- 269223-1 2-329456-1 220189-3 269727- 225398-3 -- 220189-3 269727-1 225398-6 -- 058436-1 -- 413771-2 220187-2 0158435-11 220217-2 228980-6 269477-1 058537-1 269669-1 225398-2 Termination Type Center Contact Plating Body Plating Dielectric 58, 58A, 58B, 58C, Belden 88240, BerkTek BTDC58, Comm/ Scope 2135 Hex Crimp Gold Nickel O Crimp Gold O Crimp Single Crimp 58, 58A, 58B, 58C 223, 55, 55A, 55B 142, 142A, 142B, 400 O Crimp O Crimp Gold Nickel TEFLON Mil Type 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, Belden 9291, 9209, 9269 Hex Crimp Gold Nickel Polymethylpentene Polypropylene Commercial O Crimp O Crimp Interchangeable Dies Interchangeable for PRO-CRIMPER Dies for Hand Hand Tool 354940-1 Tool 69710-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 Dim. L RG/U Cable Gold Gold Gold Nickel Nickel Nickel TEFLON TEFLON Mil Type Commercial Mil Type 269478-1 Part No. Order AMP PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 1 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 53 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Solder/Clamp 12.9 Dia. [.508] Note: Panel Insulating Bushings -- See below. 5.56 [.219] H 31.6 Dia. [1.244] Max. Recommended Panel Cutout Maximum Panel Thickness 3.6 [.142] H = 17.5 [.689] across flats, 20.32 [.800] Max. across points Panel Insulating Bushings for Bulkhead Jacks RG/U Cable Center Contact Plating Body Plating Dielectric Style M/A-COM Model No. Part No. RG179B/U, RG187A/U, URM111 RG58C/U, RG141A/U, URM43, URM76 RG59B/U, RG62A/U, RG140/U URM70 Gold Silver TEFLON Mil Type B37H39E022X 1310793-1 Gold Silver TEFLON Mil Type B35H39E010X 1314101-1 Gold Nickel TEFLON Mil Type B37H39J025X 1311691-1 Gold Silver TEFLON Mil Type B37H39E012X 1310792-1 0.89 [.035] 12.93 [.509] Dia. 0.81 [.032] 5.46 [.215] 13.95 [.549] Dia. 14.730.13 [.580.005] Dia. Material -- Nylon Note: Can not be used with single crimp bulkhead jacks. 14.10.08 [.555.003] 17.45 [.687] Dia. 14.58 Dia. [.574] Recommended Panel Cutout Part No. 330620 (2 Required) 54 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Polarized Connectors, Crimp 14.53 Max. [.572] 29.03 Max. [1.143] 27.69 Max. [1.090] Description RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Plug 58, 58A 58B, 58C 58, 58A 58B, 58C O Crimp O Crimp Gold Nickel TEFLON Commercial Gold Nickel TEFLON Commercial 27.69 1.090 29.03 1.143 Jack CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. 220187-1 220189-1 220217-1 415087-1 220187-1 220189-1 220217-1 415407-1 Insulated Plugs, Crimp 53.0 [2.086] Assembled 17.1 Dia. [.673] RG/U Cable Center Contact Plating Body Plating Dielectric Style M/A-COM Model No. Part No. Belden 9907, RG58C/U Gold Nickel TEFLON Mil Type B35A04JB105 1310693-1 Plugs, for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold 14.53 [.572] Dia. Max. Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 L Max. JIS Cable Termination Type Dielectric Dim. L 3D-2V Hex Crimp Polyethylene 1.5D-2V Hex Crimp Polyethylene 33.53 1.320 33.53 1.320 Dimensions are in millimeters over [inches] Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 58436-1 3-221128-1 58436-3 3-221128-2 www.amp.com/communications/com Specifications subject to change. 55 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Solder Jacks, Front Mount Without Solder Terminal With Solder Terminal Body Plating -- Nickel 22.23 [.875] 9.65/9.75 [.380/.384] Dia. Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 Thread .396/4.04 [.156/.159] L Max. W Dia. Max. Recommended Panel Cutout Contact Material Dielectric Silver VALOX Dimensions L W 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 VALOX Gold TEFLON Tin Lead VALOX L Max. W Dia. Max. 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 Panel Thickness Insulating Bushing 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 Part No. Without Solder With Solder Terminal* Terminal** 227754-3 227755-3 227169-3 227169-7 227754-2 227755-2 227169-4 227169-8 227715-3 227716-3 227169-1 227169-5 227754-1 227755-1 **Includes lockwasher and jam nut. **Includes solder terminal and jam nut. Insulating Bushings 1.09 Max. [.043] 11.43 [.450] 4.04 Max. [.159] 0.94 [.030] Max. 14.86 Dia. [.585] 10.93 Dia. [.430] 1.78 [.070] 12.7 [.500] Dia. 0.81 [.032] 11.94 [.470] 9.53 Dia. [.375] 15.88 Dia. [.625] 9.53 [.375] Part No. 227223-1 Part No. 221951-1 Recommended Panel Cutout Recommended Panel Cutout 11.56 0.08 [.455 .003] Dia. 12.83 0.08 [.505 .003] Dia. 10.97 0.06 [.432 .003] 56 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 3.94 Dia. [.155] Dimensions are in millimeters over [inches] 12.070.08 [.475 .003] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) 3/8" - 24 Thread Isolated Bulkhead Solder Jacks, Front Mount Accepts 1.5 [.059] DIa. Max. Wire Plating Body -- Nickel Dielectric -- White VALOX Center Contact Plating Tin Silver Gold Flange & Thread Material VALOX VALOX VALOX Part No. +0.13 9.91 -0.20 Dia. [.390 +.005 ] -.000 +0.08 31.75 Max. [1.250] 13.09 Dia. [.515] Max. 3.89 -0.00 [.153 +.003 ] -.000 Panel Thickness 1.17-6.35 [.046-.250] 227726-1 227726-2 227726-3 Recommended Panel Cutout 3/8" - 24 Thread Plating Body -- Nickel Center Contact -- Silver Dielectric -- Black VALOX Flange & Thread Material -- Black VALOX +0.08 9.60 -0.00 Dia. [.378 +.003 ] -.000 12.83 [.505] Max. +0.08 3.94 -0.00 [.155 +.003 ] 26.80 [1.055] Max. -.000 Panel Thickness 1.17-3.18 [.046-.125] Recommended Panel Cutout Part No. 414194-1 Rubber Gasket Sealed Bulkhead Solder Jack, Rear Mount Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector. +0.13 17.78 Dia. [.700] Max. 1/2" - 28 Thread 12.83 -0.00 Dia. [.505 +.005 ] -.000 Accepts . 1.5 [.059] DIa. Max. Wire +0.08 5.54 -0.00 [.218 +.003 ] 31.75 [1.250] Max. -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Part No. 227426-1 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 57 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount VALOX Body Metal Body 1/2-28 Thread 1/2-28 Thread C Mtg. Hgt. Body -- Nickel Dielectric -- Polymethylpentene C L A C Mtg. Hgt. C L B A B 34.93 [1.375] 34.93 [1.375] Mounting Post Style Center Contact Plating Body Material Tin-Lead L Gold1 VALOX, White Gold2 Tin-Lead Gold1 Compliant Post Tin-Lead Gold1 VALOX, Black Gold1 L E Gold1 Tin-Lead Gold1 +0.13 12.83 -0.00 Dia. [.505 +.005 ] Metal -.000 Gold1 Gold2 High Temp. Housing +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Gold1 A B C 8.59 .338 8.59 .338 8.59 .338 6.91 .272 6.91 .272 8.59 .338 8.59 .338 6.91 .272 6.17 .243 8.26 .325 8.26 .325 6.91 .272 6.91 .272 6.91 .272 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835 15.88 .625 15.88 .625 15.88 .625 13.18 .519 13.18 .519 15.88 .625 15.88 .625 13.18 .519 11.68 .460 15.88 .625 15.88 .625 12.70 .500 12.70 .500 13.18 .519 With Compliant Posts L -- -- -- -- -- -- -- -- -- 414684-1 4.70 1.85 -- -- -- 1-227161-4* 226990-7 -- -- -- 1-227161-7* 226990-2 1-227161-2* 226990-6 1-227161-6* 3.48 .137 3.48 .137 3.48 .137 3.48 .137 -- -- 415218-1 2.79 .110 -- 1-227161-9* -- 1-415046-1* -- 415046-2 -- 227433-1 1-227661-1* -- -- 227676-1 222785-1 3.89 .153 -- 1-227677-1 * 1-227677-2* 1-413879-1* -- -- -- 1-413879-2* 3.48 .137 3.48 .137 3.48 .137 3.48 .137 -- -- -- -- 415218-5 -- -- *IR reflow compatible Plating: Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Lockwasher and Jam Nut Without Mounting Posts 10.16 0.08 [.400 .003] With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] G Part No. 1-329632-2 Part No. Without With L Mounting Posts Mounting Posts 3.48 226990-1 1-227161-1* .137 3.48 226990-3 1-227161-3* .137 Dimensions Part No. 1-329631-2 2.54 0.05 [.100 .002] S 10.16 0.08 [.400 .003] 5.08 0.05 [.200 .002] 5.08 0.05 Mating [.200 .002] Face Mating Face G 0.89 0.08 [.035 .003] 2.54 0.05 [.100 .002] (Top View) 2.01 0.05 [.079 .002] (2 Holes) S 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layouts * Screw for panel thickness of 2.38 [3/32] or greater Part No. 221108-2. Screw for panel thickness of less than 2.38 [3/32] Part No. 221108-4. 58 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Jacks PC Board/Panel Mount VALOX Body Metal Body L L Plating Body -- Nickel Dielectric -- Polymethylpentene 1/2-28 Thread 1/2-28 Thread B +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Body Material +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] VALOX, White Recommended Panel Cutout VALOX, Black B 34.93 [1.375] Mtg. Hgt. Center Contact Plating Dim. B Dim. L Tin-Lead 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 Gold Tin-Lead Gold Tin-Lead Lockwasher and Jam Nut 15.88 [.625] 15.88 [.625] Metal Gold 34.93 [1.375] Mtg. Hgt. Part No. Without With Mounting Mounting Posts Posts 226993-1 227222-1 226993-3 227222-3 226993-2 227222-2 226993-6 227222-6 227670-1 227671-1 227672-1 227673-1 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Part No. 1-329632-2 Part No. 1-329631-2 Without Mounting Posts With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] 0.89 0.08 [.035 .003] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] 2.54 [.100 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] (Top View) 0.05 .002] 5.08 0.05 [.200 .002] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layouts * Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4. Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 59 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks with Mounting Flanges PC Board/Panel Mount Right Angle Mount Vertical Mount 1/2-28 Thread 1/2-28 Thread 15.88 [.625] 15.88 [.625] Mounting Height +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 C L 8.59 [.338] C L 21.21 [.835] 8.59 [.338] 21.21 [.835] 34.93 [1.375] 34.93 [1.375] Mounting Height +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Lockwasher and Jam Nut Body Material Center Contact Plating VALOX, White Tin Gold Part No. Right Angle Mount Vertical Mount 226978-1 -- 226978-3 226987-7 Vertical Mount Right Angle Mount 3.3 [.130] Dia. Clearance Hole for 5-40 Screw 22.86 0.08 [.900 .003] 22.86 0.08 [.900 .003] 8.89 [.350] Part No. 1-329632-2 11.43 [.450] 11.43 [.450] Mating Face G Part No. 1-329631-2 G S 2.54 [.100] 0.89 0.08 [.035 .003] 2.54 [.100] 0.89 0.08 [.035 .003] 3.3 [.130] Dia. Clearance Hole for 5-40 Screw S (Top View) (Top View) Recommended PC Board Layouts Surface Mount Right Angle Jacks 10.16 .0.08 [.400 .003] 2.54 [.100] Typ. With Mounting Holes (no post) 1.27 [.050] Typ. B 2.54 [.100] 12.01 .0.08 [.079 .003] 2 Plcs. +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 5.08 [.200] 5.08 [.200] +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Recommended Panel Cutout A Recommended PCB Configuration Body Material With Compliant Post Center Contact Plating Gold High Temp. Gold B A A 6.91 .272 6.91 .272 Dimensions B L 13.18 -- .519 13.18 2.79 .519 .110 Without Mounting Post With Compliant Post 415715-1* -- -- 415715-2* L *IR reflow compatible. Plating: Gold - 0.00076 [.000030] thick. 60 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Body Plating Recommended PC Board Layouts Style A Center Contact Plating Dielectric Style Silver VALOX A Gold VALOX A Tin VALOX A Gold VALOX A Silver TEFLON B Silver VALOX C Gold VALOX E Gold TEFLON F Gold TEFLON B Silver VALOX C Silver VALOX C Gold VALOX C Gold VALOX C Gold VALOX D Tin VALOX D L 12.7 0.08 [.500 .003] 6.35 0.05 [.250 .002] 12.7 0.08 [.500 .003] 17.45 Sq. [.687] 15.88 [.625] Style B Nickel Drill Holes for 0.94 0.05 [.037 .002] Dia. Pin (5 Places) 6.35 0.05 [.250 .002] L 6.88 0.08 [.271 .003] 1.50 0.08 Dia. [.059 .003] (4 Holes) Tin-Lead 3.44 0.08 [.135 .003] 6.88 0.08 [.271 .003] 20.57 [.810] 1.02 [.040 Style C L 0.08 .003] 3.43 0.08 [.135 .003] Dia. Leg Length L 6.35 .250 6.35 .250 6.35 .250 3.81 .150 3.30 .130 4.45 .175 6.35 .250 2.54 .100 3.30 .130 3.18 .125 4.45 .175 3.18 .125 4.45 .175 3.43 .135 3.43 .135 Part No. 227699-1 227699-2 227699-3 414460-11 413969-1 222420-1 415189-1 1274360-1 413969-2 414305-1 414305-2 414305-3 414305-4 221123-2 221123-3 With .76 [.030] standoffs on top of legs. 1 Style E (Panel Mount) 6.88 0.05 [.271 .003] 2.44 0.08 Dia. [.096 .003] (4 Holes) 3.43 0.05 [.135 .002] 6.88 0.05 [.271 .003] 1.32 0.08 Dia. [.052 .003] 16.64 [.655] 12.70 0.08 [.500 .003] 6.35 0.06 [.250 .002] Drill Hole to Receive 0.940.06 [.037.002] Dia. Pin, 5 Required 20.78 0.38 [.818 .015] L Style D 12.70 0.08 [.500 .003] Style F (Push-On) 1.07 0.05 Dia. [.042 .002] L 4.32 [.170] 2.578 0.076 [.1015 .0030] 1.73 0.05 Dia. [.068 .002] 6.48 [.255] 15.88 [.625] Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 1.02 0.08 Dia. [.040 .003] 14.73 [.580] 3.73 [.147] 7.47 [.294] Dimensions are in millimeters over [inches] 2.54 5 Plcs. [.100] 5.16 0.08 [.203 .003] 5.16 0.08 [.203 .003] www.amp.com/communications/com 2.06 0.05 Dia. [.081 .002] 4 Plcs. Specifications subject to change. 61 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks, PC Board Mount 7.50 0.08 [.295 .003] 24.00 [.945] Signal Contact Hole 1.00 0.08 [.039 .003] 2 Plcs. 10.72 0.25 [.422 .010] Switching Contact 1.70 0.10 Hole [.067 .004] 2.50 0.08 [.098 .003] 4 Plcs. 3.00 0.10 [.118 .004] 1.50 0.08 [.059 .003] 2 Plcs. 10.70 0.08 [.421 .003] Recommended PC Board Layout Part No. 1274314-1 (Switching) 3.75 0.08 [.148 .003] 24.00 [.945] 1.00 0.08 [.039 .003] 10.72 0.25 [.422 .010] 1.70 0.10 [.067 .004] 2.50 0.08 [.098 .003] 3 Plcs. 3.00 0.10 [.118 .004] 1.50 0.08 [.059 .003] 2 Plcs. 10.70 0.08 [.421 .003] Part No. 1274315-1 Body Plating Tin-Lead Tin-Lead Recommended PC Board Layout Contact Plating Silver Silver Dielectric Polyphenylene Polyphenylene Press Fit Vertical Metalized Jack, PC Board Mount 11.94 Dia. [.470] Max. Insulating Bushing Material -- Polypropylene Part No. 222163-1 Only to be used on P/N 222006-1 & 222462-1 6.88 0.05 [.271 .002] +0.08 3.43 0.05 [.135 .002] 6.88 0.05 [.271 .002] 20.57 [.810] Max. Part No. 1274314-1 1274315-1 1.5 -0.10 [.059 +.003 ] -.004 Dia. 4 Holes 1.02 0.08 Dia. [.040 .003] 14.61 Dia. [.575] Recommended PC Board Layout PC Board Thickness Not Less Than 0.99 [.093] 11.94 [.470] Dia. 2.96 [.115] Max. 6.61 [.260] Max. Part No. 222006-1 62 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right Angle Metalized Jacks, PC Board Mount 6.6 0.08 [.260 .003] 10.97 [.432] Mounting Height 3.3 0.08 [.130 .003] C L 6.15 [.242] 2.11 0.08 [.083 .003] Dia. (4 holes) 6.6 0.08 [.260 .003] 28.4 Max. [1.118] Body Plating Dielectric Nickel Polymethylpentene Tin-Lead TEFLON Center Contact Length 4.34 .171 4.34 .171 Part No. 413631-1* 413631-2* 1.17 0.08 Dia. [.046 .003] Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout 1.19 0.18 Dia. [.047 .007] 3.81 0.08 [.150 .003] 6.35 Ref. [.250] 8.64 [.340] 2.39 0.38 [.094 .015] 7.62 0.08 [.300 .003] 21.85 [.860] 25.40 [ 1.000] 7.62 0.08 [.300 .003] 1.78 0.08 Dia. [.070 .003] 2 Holes 10 60 20 Body Dielectric Contact Nickel Nickel Tin-Lead TPX TPX TPX Gold Gold Gold Part No. 414373-1** 414373-3** 414373-4** **Board retention leg prevents connector from tipping during wave solder. For 414373-3 and 414373-4 only. Recommended PC Board Layouts 6.6 0.08 [.260 .003] Right-Angle Metalized Jacks, PC Board/Panel Mount 3.3 0.08 [.130 .003] 1.088 .020 [27.64 0.51] 2.11 0.08 Dia. [.083 .003] 4 holes 6.6 0.08 [.260 .003] .603 .003 [15.32 0.08] 1.17 0.08 Dia. [.046 .003] Body Plating Dielectric Dim. A Part No. Tin-Lead TPX 415025-2 Tin-Lead TPX 11.66 .459 16.26 .640 415372-1 +0.13 4.34 [.171] .242 .010 [6.15 0.25] 12.83 -0.00 Dia. [.505 +.005 ] -.000 A 1/2-28 Thread Lockwasher and Jam Nut see page 60. .183 [4.65] +0.08 5.64 -0.00 Dia. [.222 +.003 ] -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 63 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Tee Adapters Style A Style B Style C (Jack-Plug-Jack) With Insulated Cover (Jack-Plug-Jack) (Jack-Jack-Jack) D D Insulation Material Polyphenylene oxide D F E E E F Style Body Material and Plating Center Contact Material and Plating BE CU, Gold (30)3 BE CU, Silver (200)3 PH BR, Gold (15)3 PH BR, Silver (200)3 BE CU, Gold (30)3 BE CU, Silver (200)3 PH BR, Gold (15)3 PH BR, Silver (200)3 BE CU, Silver (200)3 BE CU, Gold (30)3 BE CU, Silver (200)3 PH BR, Gold (50)3 Brass, Nickel A Zinc, Nickel B C Zinc, Nickel Brass, Nickel Zinc, Nickel Dielectric TEFLON TEFLON Acetal Acetal Acetal Acetal Acetal Acetal Acetal Acetal TEFLON Acetal D 32.54 1.281 32.54 1.281 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 32.54 1.281 32.54 1.281 32.54 1.281 Dimensions E 26.19 1.031 26.19 1.031 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 31.12 1.225 23.37 .920 23.62 .930 Comparable UG/U Connector F 14.27 .562 14.27 .562 14.50 .571 14.50 .571 14.50 .571 14.50 .571 14.50 .571 14.50 .571 14.50 .571 17.15 .675 Packaging No. Per Pkg. Bulk (100) Individual (1) Bulk (100) Bulk (100) Bulk (100) Bulk (100) Individual (1) 4 Individual (1) 4 Individual (1) Bulk(100) Bulk (100) Bulk (100) 274A 274B -- -- -- -- -- -- -- 1 -- -- -- -- -- Part No. 221543-2 329518 413592-2 413592-4 413592-6 413592-8 413592-9 1-413592-0 1-413592-1 413366-11 413366-22 221988-1 414311-1 Black insulation cover Gray insulation cover 3(Microinches min thickness) 4(Special graphics) 1 2 Tee Adapter Covers 114.55 0.76 [4.510 .030] Material -- Polypropylene, general purpose Color Part No. Black 221586-1 Ivory 221586-3 15.11 [.595] Dia. 64 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] 5.08 Dia. [.200] www.amp.com/communications/com Specifications subject to change. Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jack-Jack Adapters Style B Style A Nickel Nickel Center Contact Plating Silver Gold Nickel Gold Body Plating 35.81 [1.410] 32.54 [1.281] Bulkhead Jack-Jack Adapters +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 L Max. H Max. Body Plating Center Contact Plating Nickel Silver Nickel Gold1 Nickel Gold2 Dielectric Style Part No. TEFLON TEFLON Polymethylpentene A A 221551-1 221551-3 B 414414-1 Dimensions H L 17.45 .687 17.78 .700 17.78 .700 38.10 1.500 36.07 1.420 36.07 1.420 Dielectric Part No. TEFLON 330024 Polyethylene Polyethylene 228226-1 228226-3 Plating: Gold1 -- 0.00127 [.000050] thick Gold2 -- 0.00076 [.000015] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. +0.06 5.54 -0.00 [.218 +.003 ] -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. +0.13 Isolated Bulkhead Jack-Jack Adapter Body Plating Nickel Center Contact Plating Gold 12.83 -0.00 Dia. [.505 +.005 ] -.000 Dielectric Part No. Polymethylpentene 414105-1 +0.06 15.87 [.625] 5.54 -0.00 Dia. [.218 +.003 ] 36.07 [1.420] -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. Plug-Plug Adapter Body Plating Nickel Silver 31.8 Ref. [1.252] Right Angle Adapters Style A (Jack-Plug) Body Plating Nickel Nickel Nickel Dielectric Style Part No. TEFLON TEFLON Polymethylpentene A A B 329517 222165-2 414666-1 Part No. 1312105-1 1310727-1 Style B 14.53 Dia [.572] Max. Center Contact Plating Silver Gold Gold M/A-COM Model No. B35P32J999X B35P32E999X 14.53 Dia [.572] Max. 24.13 [.950] Max. 22.89 [.901] Max. 26.97 [1.062] 27.23 [1.072] Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change. 65 Catalog 1307191 Revised 10-00 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Terminator Plugs 50, 75, 93 Ohm Resistor Specification Tether Plating 1 Watt, 50 Ohm 1 Watt, 75 Ohm 1 Watt, 93 Ohm 0.5 Watt, 75 Ohm 1 Watt, 50 Ohm Body -- Nickel Center Contact -- Gold Dielectric -- Polyethylene 14.53 Dia. [.572] Max. 33.02 [1.300] 1 2 Part No. With Tether Without Tether 221629-11 221629-4 221629-21 221629-5 221629-31 221629-6 1-221629-12 -- 1-221629-61 -- Tether is conductive with #4 stud size With chain assembly #6 Stud Size Insulated Terminators Long Cover Insulation Material Polyphenylene oxide 38.10 Max. [1.500] 38.10 Max. [1.500] 17.40 [.685] 17.40 [.685] Register Specification Cover Style Long Short Long Short Color Gray 1 Watt, 50 Ohm Black Short Cover* Part No. 413557-1 413364-2 413557-2 413364-1 * The Short Cover is required when mating the Terminator with a Tee Adapter. Jack Covers Shorting Caps 22.10 Max. [.870] 14.53 Dia. [.572] Max. Body Plating Silver Nickel Plating Body -- Nickel Center Contact -- Gold Part No. 330022 1-330022-2 15.24 [.600] 101.6 [4.000] 14.53 [.572] Dia. Max. #6 Stud Size Part No. 413453-1 66 Technical Support Center/AMP FAX Service 1-800-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www.amp.com/communications/com Specifications subject to change.