High Frequency Relay G6K-RF 99
High Frequency Relay
G6K-RF
Surface Mount, 1GHz / 3 GHz Miniature
DPDT, High Frequency Relay
•
New
Models with 3 GHz band available (“-T” versions)
• Space-saving 1 GHz version with smaller ground terminal footprint
is available. (“-S” versions)
• Handles 1 A, 30 VDC discrete load and 1 W at 1GHz.
• Single-coil latching models available.
• Low coil power consumption: 100 mW.
• Ideal for instrumentation and high-speed LAN network equipment.
• RoHS Compliant
Ordering Information
Note: The above listed models are packaged in trays of 300. They are also available in Tape and Reel packaging.
1. Place “-TR03” before the coil voltage to obtain Tape and Reel packaging, in quantities of 300 pieces per reel.
2. Place “-TR09” before the coil voltage to obtain Tape and Reel packaging, in quantities of 900 pieces per reel.
Examples: G6K-2F-RF-S-TR09 DC5
G6KU-2F-RF-TR03 DC12
3. “-TR03” and “-TR09” is only used to identify the tape quantity when ordering and is not marked on the product, itself.
Specifications
■Contact Ratings
Note: This value is for a load with V.S.W.R. ≤ 1.2
PCB Footprint Max.Load Coil Voltage Non-Latching part number Single-coil latching part number
Standard ground
terminal
(1GHz)
1 A at 30 VDC,
0.3 A at 125 VDC
3 VDC G6K-2F-RF DC3 G6KU-2F-RF DC3
4.5 VDC G6K-2F-RF DC4.5 G6KU-2F-RF DC4.5
5 VDC G6K-2F-RF DC5 G6KU-2F-RF DC5
12 VDC G6K-2F-RF DC12 G6KU-2F-RF DC12
24 VDC G6K-2F-RF DC24 G6KU-2F-RF DC24
Space-saving
ground terminal
(1 GHz)
3 VDC G6K-2F-RF-S DC3 G6KU-2F-RF-S DC3
4.5 VDC G6K-2F-RF-S DC4.5 G6KU-2F-RF-S DC4.5
5 VDC G6K-2F-RF-S DC5 G6KU-2F-RF-S DC5
12 VDC G6K-2F-RF-S DC12 G6KU-2F-RF-S DC12
24 VDC G6K-2F-RF-S DC24 G6KU-2F-RF-S DC24
Space-saving
ground terminal
(3GHz)
3 VDC G6K-2F-RF-T DC3 G6KU-2F-RF-T DC3
4.5 VDC G6K-2F-RF-T DC4.5 G6KU-2F-RF-T DC4.5
5 VDC G6K-2F-RF-T DC5 G6KU-2F-RF-T DC5
12 VDC G6K-2F-RF-T DC12 G6KU-2F-RF-T DC12
24 VDC G6K-2F-RF-T DC24 G6KU-2F-RF-T DC24
Load Resistive load
Rated load 0.3 A at 125 VAC; 1 A at 30 VDC
1 W at 1 GHz (See note.)
Rated carry current 1 A
Max. switching voltage 125 VAC, 60 VDC
Max. switching current 1 A
Max. switching capacity 37.5 VA (AC); 30 W (DC)
100 High Frequency Relay G6K-RF
■Coil Ratings
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. The operating characteristics are measured at a coil temperature of 23°C.
3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.
■High Frequency Characteristics
Note: 1. The impedance of the measurement system is 50 Ω.
2. The above values are initial
3. These values are for a load with V.S.W.R. ≤ 1.2
4. Contact Omron if the relay will be used in an application that requires high repeatability in high-frequency characteristics for the microload
region. (Such applications include Test and Measurement equipment and ATE applications.)
■Characteristics
Note: 1. The above values are initial values.
2. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
3. Values in parentheses are typical values.
4.
The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.
Rated voltage Rated current Coil resistance Must operate
voltage
Must release
voltage
Maximum voltage Rated power
consumption
3 VDC 33.0 mA 91 Ω 80% max. of rated
voltage
(75% max. of rated
set voltage for
latching models)
10% min. of rated
voltage
(75% max. of rated
reset voltage for
latching models)
150% of rated voltage Approx. 100 mW
4.5 VDC 23.2 mA 194 Ω
5 VDC 21.1 mA 237 Ω
12 VDC 9.1 mA 1,315 Ω
24 VDC 4.6 mA 5,220 Ω
1 GHz, all models 3 GHz, “-T” models
Isolation between contacts of
the same pole
20 dB min. 18 dB min.
between contacts of
different poles
30 dB min. 25 dB min.
Insertion loss 0.2 dB max. 0.6 dB max.
V.S.W.R. 1.2 max. 1.4 max.
Maximum transmission capacity 3 W (See note 3)
Maximum switching capacity 1 W (See note 3)
Item Single-side stable models Single-winding latching models
G6K-2F-RF(-S)(-T) G6KU-2F-RF(-S)(-T)
Contact resistance (See note 2.) 100 mΩ max.
Operating (set) time (See note 3.) 3 ms max. (approx. 1.4 ms) 3 ms max. (approx. 1.2 ms)
Release (reset) time (See note 3.) 3 ms max. (approx. 1.3 ms) 3 ms max. (approx. 1.2 ms)
Minimum set/reset pulse time --- 10 ms
Insulation resistance (See note 4.) 1,000 MΩ min. (at 500 VDC)
Dielectric strength Between coil and
contacts
750 VAC, 50/60 Hz for 1 min
Between contacts of
different poles
750 VAC, 50/60 Hz for 1 min
Between contacts of the
same pole
750 VAC, 50/60 Hz for 1 min
Between ground and
coil/contacts
500 VAC, 50/60 Hz for 1 min
Vibration resistance Destruction 10 to 55 Hz, 5-mm double amplitude and 55 to 500 to 55 Hz, 300 m/s2
Malfunction 10 to 55 Hz, 3.3-mm double amplitude and 55 to 500 to 55 Hz, 200 m/s2
Shock resistance Destruction 1,000 m/s2
Malfunction 750 m/s2
Endurance Mechanical 50,000,000 operations min. (at a switching frequency of 36,000 operations/hour)
Electrical 100,000 operations min. (at a switching frequency of 1,800 operations/hour)
Ambient temperature Operating: −40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 5% to 85%
Weight Approx. 0.95 g
High Frequency Relay G6K-RF 101
Engineering Data
Note: 1. Refer to the G6K specification for basic specifications and characteristics not shown above
2. Ambient temperature condition: 23°C
3. The high-frequency characteristics depend on the mounting board. Be sure to check actual operation, including durability, in
actual equipment before use.
G6K-2F-RF
50 Ω
terminaltion
Agile HP 8753D
Vector Network
Analyzer
High-Frequency Characteristics
(Isolation)
G6K-2F-RF
High-frequency Characteristics
(Insertion Loss)
G6K-2F-RF
High-frequency Characteristics
(Return Loss, V.S.W.R.)
G6K-2F-RF
G6K-2F-RF-S G6K-2F-RF-S G6K-2F-RF-S
G6K-2F-RF-T G6K-2F-RF-T G6K-2F-RF-T
0
10
20
30
40
50
60
70
80
90 0 0.5 1 1.5 2 2.5 3
Test subject: G6K-2F-RF
Number of Units: 10
Frequency (GHz)
Average value (initial)
Isolation (dB)
0
0.1
0.2
0.3
0.4
0.5 0.50 1 1.5 2 2.5 3
Test subject: G6K-2F-RF
Number of Units: 10
Insertion loss (dB)
Fre
q
uenc
y
(
GHz
)
Average value (initial)
0
10
20
30
40
50
60
70
80
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0 0.5 1 1.5 2 2.5 3
V.SWR
Test subject: G6K-2F-RF
Number of Units: 5
V
·
S
W
R
Return loss
Return loss (dB)
Frequency (GHz)
Average value (initial)
0
10
20
30
40
50
60
70
80
90 0 0.5 1 1.5 2 2.5 3
Test subject: G6K-2F-RF-S
Number of Units: 10
Frequency (GHz)
Average value (initial)
Isolation (dB)
0
0.1
0.2
0.3
0.4
0.5 0.50 1 1.5 2 2.5 3
Test subject: G6K-2F-RF-S
Number of Units: 10
Insertion loss (dB)
Fre
q
uenc
y
(
GHz
)
Average value (initial)
0
10
20
30
40
50
60
70
80
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0 0.5 1 1.5 2 2.5 3
V.SWR
Test subject: G6K-2F-RF-S
Number of Units: 5
V
·
S
W
R
Return loss
Return loss (dB)
Frequenc
y
(GHz)
Average value (initial)
0
10
20
30
40
50
60
70
80
90 01 2 3 4 56
N.O.
N.C.
Test subject: G6K-2F-RF-T
Number of Units: 5
Frequency (GHz)
Average value (initial)
Isolation (dB)
0.0
0.2
0.4
0.6
0.8
1.0 1023456
N.O.
N.C.
Test subject: G6K-2F-RF-T
Number of Units: 5
Insertion loss (dB)
Frequency (GHz)
Average value (initial)
0
10
20
30
40
50
60
70
80
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0123456
V.SWR
Return loss
N.O.
N.C.
Test subject: G6K-2F-RF-T
Number of Units: 5
V
·
S
W
R
Return loss (dB)
Frequency (GHz)
Average value (initial)
102 High Frequency Relay G6K-RF
Dimensions
Note: All dimensions are in millimeters unless otherwise indicated
−
S
+
−
+
+
R
−
8765
1234
8765
1234
12.8
10.3
0.6
5.4
0.5
1.35 3.2
5.4
7.6
6.9
7.8
0.3
1.8 7
11.5
1.95
(1.35)
0.8
2.5
2.5
0.5
7.6
5.4
3.2
Orientation mark
Orientation mark
G6K-2F-RF
G6KU-2F-RF
G6K-2F-RF
G6KU-2F-RF
Mounting Dimensions
(Top View)
Tolerance ±0.1 mm
Terminal Arrangement and
Internal Connections
(Top View)
Note: 1. Each value has a tolerance of ±0.3 mm
2. The coplanarity of the terminals is 0.15 mm max.
−
+
−
+
+
R
−
8
1
8765
1234
G6K-2F-RF-S
VDC
JAPAN
765
234
S
10.7
10.3
0.6
5.4
0.5
1.35 3.2
5.4
7.6
6.9
0.3
Orientation mark
Orientation mark
G6K-2F-RF-S
G6KU-2F-RF-S
0.851.5
1.550.85
7.8 8.6
1.8 77.5
(1.35) 0.8
11.8
2.1
7.6
8.8
5.4
3.2
1.2
1.6
G6K-2F-RF-S
G6KU-2F-RF-S
Mounting Dimensions
(Top View)
Tolerance ±0.1 mm
Terminal Arrangement and
Internal Connections
(Top View)
Note: 1. Each value has a tolerance of ±0.3 mm
2. The coplanarity of the terminals is 0.15 mm max.
G6K-2F-RF-T
VDC
JAPAN
6.9
7.8
0.3
7.6
5.4
3.2
1.1
4-1.15 1.35
4.8
4.8
1.35 2.2 2.2 (2.45)
14-0.8
10.8 7
7.6
5.4
3.21.35
0.5
0.6
2.2 2.2
10.3
1.1
10.7
5.4
0.85 0.850.5
8.6
−
+
8765
1234
Orientation mark
−
+
+
R
−
8
1
765
234
S
Orientation mark
G6K-2F-RF-T
G6KU-2F-RF-T
G6K-2F-RF-T
G6KU-2F-RF-T
Mounting Dimensions
(Top View)
Tolerance ±0.1 mm
Terminal Arrangement and
Internal Connections
(Top View)
Note: 1. Each value has a tolerance of ±0.3 mm
2. The coplanarity of the terminals is 0.15 mm max.
High Frequency Relay G6K-RF 103
Tape Packaging Specifications
•Add “-TR03” or “-TR09” before the coil voltage to order relays in Tape and Reel packaging. If “-TR03” or “-TR09” is not included, then the relays
will be provided in trays of 300 relays per tray.
- - Add “-TR03” to obtain 300 relays per reel
- - Add “-TR09” to obtain 900 relays per reel
1. Direction of Relay insertion
2. Reel Dimensions
3. Carrier Tape Dimensions
G6K(U)-2F-RF
G6K(U)-2F-RF-S
Top tape
(cover tape)
Carrier tape Embossed
tape
Orientation mark
Pulling Direction
G6K(U)-2F-RF
Pulling
direction
G6K(U)-2F-RF-S(-T)
Orientation mark
Pulling
direction
3° 0°
−1°
3° 0°
−1°
4±0.1
12±1.0
8.5±0.1
4.25±0.1
2±0.1
B
B
A
A
1.5+0.1
0 dia. 1.75±0.1
5.9±0.1
0.4±0.1
10.9±0.1
13.4±0.1
A-A Cross Section
24±0.2
B-B Cross Section
11.5±0.1
3° max.
3° max.
4±0.1
12±0.1
9.2±0.1
2±0.1
B
B
A
A
1.5+0.1
0 dia. 1.75±0.1
5.9±0.1
0.4±0.05
11.3±0.1
A-A Cross Section
24±0.3
B-B Cross Section
11.5±0.1
104 High Frequency Relay G6K-RF
Precautions
■Recommended Soldering Method
3.
The thickness of cream solder to be applied should be between 200 and 250
μ
m and the land pattern should be based on Omron’s recommended
PCB pattern. To maintain the correct soldering joint shown in the following diagram, we recommend applying solder using the soldering conditions
shown above. Check the soldering in the actual mounting conditions prior to use.
■Precautions for correct use
For general precautions, refer to Omron’s Relay Technical guidelines, contained in Omron’s relay catalog.
Relay Handling
Do not unpack the relay until ready to mount it. Use the relay as soon as
possible after opening the moisture-proof bag. Otherwise, the terminals
may tarnish and seal failure may occur after the solder process.
When washing the product after soldering, use a water-based or
alcohol-based solvent. Keep the solvent temperature below 40°C.
Do not put the relay in a cold cleaning bath immediately after soldering.
Operating, Storage Environment
If the relay is stored for a long time in an adverse environment with high
temperature, high humidity, organic or sulfide gases, then sulfide or
oxide films will form on the contact surfaces. These films may result in
unstable contact, contact problems or function problems. Therefore,
operate, store or transport the product under specified environmental
conditions.
1. Use in locations where the relay is not exposed to corrosive
gas such as hydrogen sulfide gas or salty air.
2. Use in locations where no visible dust exists.
3. Use, store and transport in locations where the product is not
exposed to direct sunlight, rain or snow.
4.
Do not apply force to the product which may result in deformation
or change in quality of the product.
Coating
The relay mounted on the PCB may be coated or washed, but do not
apply silicone coating or detergent containing silicone, otherwise, the
silicone coating or detergent may remain on the surface of the relay.
Latching Relay Mounting
Make sure that excess vibration or shock doesn’t set or reset the
relay during normal operation. The relay is shipped in the ‘reset’
position.
Shock or vibration during shipping may require the application
of a reset signal, prior to operation.
Claw Securing Force During Automatic Mounting
During automatic insertion of relays, make sure to set the securing
force of each claw to the following so that the relay’s characteristics
will be maintained.
Maximum Allowable Voltage
The maximum allowable voltage of the coil can be obtained from the
coil temperature increase and the heat-resisting temperature of the
coil insulating sheath material. (Exceeding the heat-resisting tem-
perature may result in burning or short-circuiting.) The maximum
allowable voltage also involves important restrictions which include
the following;
•
Must not cause thermal changes in or deterioration of the insulating
material, which may result in films developing on the contacts.
• Must not cause damage to other control devices.
• Must not cause any harmful effect on people.
• Must not cause fire.
Therefore, be sure to use the maximum allowable voltage as specified in
the catalog. As a rule, the rated voltage must be applied to the coil. Con-
sider using a latching relay instead of a non-latching relay with a continu-
ous voltage applied to the coil.
Long-term, Continuous ON contacts
Using the relay where it will remain continuously energized for long
periods of time can lead to unstable contacts. We recommend using
a latching relay for this type of application.
1. Temperature Profile for Lead Solder (Measured at the PCB) 2. Temperature Profile for Lead-free Solder (Measured at the PCB)
Temperature (°C)
220 to
245
180 to
200
150
Soldering
Preheating
Time (s)
90 to 120 20 to 30
Relay terminal
section
250 max.
230
180
150
120 max. 30 max.
Case top panel
(peak): 255°C max.
Temperature (°C)
Soldering
Preheating
Time
(
s
)
Relay
Solder Insufficient
amount of
solder
Excessive
amount of
solder
Terminal
PCB Land
A
C
B
Direction A: 1.96 N max.
Direction B: 4.90 N max.
Direction C: 1.96 N max.
Secure the claws to the shaded area. Do not
attach them to the center of the relay or just
one part of the relay.
High Frequency Relay G6K-RF
MEMO
High Frequency Relay G6K-RF
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X301-E-1b Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/12 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.