AP9565AGH/J RoHS-compliant Product Advanced Power Electronics Corp. P-CHANNEL ENHANCEMENT MODE POWER MOSFET Lower Gate Charge D Simple Drive Requirement Fast Switching Characteristic G BVDSS -40V RDS(ON) 42m ID -18.5A S Description Advanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. G The TO-252 package is widely preferred for commercial-industrial surface mount applications and suited for low voltage applications such as DC/DC converters. The through-hole version (AP9565AGJ) is available for low-profile applications. D S TO-252(H) G D S TO-251(J) Absolute Maximum Ratings Symbol Parameter Rating Units VDS Drain-Source Voltage -40 V VGS Gate-Source Voltage +20 V ID@TC=25 Continuous Drain Current, VGS @ 10V -18.5 A ID@TC=100 Continuous Drain Current, VGS @ 10V -14.8 A 1 IDM Pulsed Drain Current -72 A PD@TC=25 Total Power Dissipation 25 W Linear Derating Factor 0.2 W/ TSTG Storage Temperature Range -55 to 150 TJ Operating Junction Temperature Range -55 to 150 Thermal Data Symbol Rthj-c Parameter Maximum Thermal Resistance, Junction-case 3 Value Units 5.0 /W Rthj-a Maximum Thermal Resistance, Junction-ambient (PCB mount) 62.5 /W Rthj-a Maximum Thermal Resistance, Junction-ambient 110 /W Data and specifications subject to change without notice 1 200906183 AP9565AGH/J Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol BVDSS RDS(ON) Parameter Test Conditions Drain-Source Breakdown Voltage Static Drain-Source On-Resistance 2 Min. Typ. Max. Units VGS=0V, ID=-250uA -40 - - V VGS=-10V, ID=-12A - - 42 m VGS=-4.5V, ID=-9A - - 60 m VGS(th) Gate Threshold Voltage VDS=VGS, ID=-250uA -1 - -3 V gfs Forward Transconductance VDS=-10V, ID=-16A - 20 - S IDSS Drain-Source Leakage Current VDS=-40V, VGS=0V - - -1 uA Drain-Source Leakage Current (T j=125 C) VDS=-32V, VGS=0V - - -250 uA Gate-Source Leakage VGS= +20V, VDS=0V - - +100 nA ID=-16A - 12 18 nC o IGSS 2 Qg Total Gate Charge Qgs Gate-Source Charge VDS=-32V - 2.3 - nC Qgd Gate-Drain ("Miller") Charge VGS=-4.5V - 6.9 - nC VDS=-20V - 8 - ns 2 td(on) Turn-on Delay Time tr Rise Time ID=-16A - 34 - ns td(off) Turn-off Delay Time RG=3.3,VGS=-10V - 26 - ns tf Fall Time RD=1.25 - 74 - ns Ciss Input Capacitance VGS=0V - 850 1360 pF Coss Output Capacitance VDS=-25V - 110 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 100 - pF Min. Typ. IS=-16A, VGS=0V - - -1.2 V IS=-16A, VGS=0V, - 26 - ns dI/dt=-100A/s - 20 - nC Source-Drain Diode Symbol VSD Parameter 2 Forward On Voltage 2 trr Reverse Recovery Time Qrr Reverse Recovery Charge Test Conditions Max. Units Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test 3.Surface mounted on 1 in2 copper pad of FR4 board THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. 2 AP9565AGH/J 40 60 -10V -7.0V -5.0V -4.5V T C = 25 C -ID , Drain Current (A) 50 -10V -7.0V -5.0V -4.5V T C = 150 o C -ID , Drain Current (A) o 40 30 V G = -3.0 V 20 30 V G = -3.0 V 20 10 10 0 0 0 1 2 3 4 5 0 6 1 2 3 4 5 6 -V DS , Drain-to-Source Voltage (V) -V DS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 50 1.8 I D =-12A V G =-10V I D = -12 A T C =25 46 Normalized RDS(ON) RDS(ON) (m ) 1.5 42 38 1.2 0.9 34 0.6 30 2 4 6 8 -50 10 20 1.4 16 1.2 12 o T j =150 C 50 100 150 Fig 4. Normalized On-Resistance v.s. Junction Temperature Normalized -VGS(th) (V) -IS(A) Fig 3. On-Resistance v.s. Gate Voltage o 0 T j , Junction Temperature ( o C) -V GS , Gate-to-Source Voltage (V) T j =25 C 8 1 0.8 0.6 4 0.4 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 -V SD , Source-to-Drain Voltage (V) Fig 5. Forward Characteristic of Reverse Diode 1.6 -50 0 50 100 150 o T j , Junction Temperature ( C) Fig 6. Gate Threshold Voltage v.s. Junction Temperature 3 AP9565AGH/J f=1.0MHz 10000 V DS = -32V I D = -16A 12 10 1000 C iss 8 C (pF) -VGS , Gate to Source Voltage (V) 14 6 C oss C rss 100 4 2 10 0 0 5 10 15 20 25 1 5 9 13 17 21 25 29 -V DS , Drain-to-Source Voltage (V) Q G , Total Gate Charge (nC) Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics 1 10 Normalized Thermal Response (Rthjc) 100 -ID (A) 100us 1ms 10ms 100ms DC 1 o T c =25 C Single Pulse 0.1 Duty factor=0.5 0.2 0.1 0.1 0.05 PDM 0.02 t T 0.01 Duty factor = t/T Peak Tj = PDM x Rthjc + T C Single Pulse 0.01 0.1 1 10 100 0.00001 0.0001 -V DS , Drain-to-Source Voltage (V) 0.001 0.01 0.1 1 t , Pulse Width (s) Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance 40 V DS =-5V VG -ID , Drain Current (A) 30 T j =25 o C QG T j =150 o C -4.5V QGS 20 QGD 10 Charge Q 0 0 2 4 6 -V GS , Gate-to-Source Voltage (V) Fig 11. Transfer Characteristics Fig 12. Gate Charge Waveform 4