Inductive Proximity Sensors
2–105
Description
Bulletin
871U inductive proximity
sensors are self-contained, solid state
devices designed to sense the
presence of metal objects without
touching them. These special
isolated-output models are rated for
1000V minimum from output to output
(dual output models only) and up to
2500V minimum from input to output.
The electronic circuitry is potted for
protection against shock, vibration and
contamination. The switch is enclosed
by a plastic face and a threaded
nickel-plated brass barrel which meet
NEMA 3, 4, 6P
, 12, 13 and IP67
(IEC529) standards.
These sensors are available in 12 and
18mm diameters. Connection options
include a 3m (10ft) PVC cable and mini
quick-disconnect.
Features
S
4-wire or 6-wire operation
S4-conductor
, 6-conductor
, 5-pin or
6-pin connection
S11–52V DC and 15–132V AC
S
Normally open or complementary
(N.O. and N.C.) isolated outputs
SFalse pulse and transient noise
protection
S
Reverse polarity protection on DC
output
STTL compatible
S
UL listed, CSA certified, and CE
marked for all applicable directives
Styles
AC/DC 4- or 6-Wire
page 2–106.
. . . . .
Accessories
Quick-Disconnect Cables page 5–1
. . .
General Information
Torque
Chart
page 2–203.
. . . . . . . . . . .
Metric/English
Conversion Chart
page 11–1
. . . . . . . . .
Bulletin
871U
Plastic Face/Threaded Nickel-Plated Brass Barrel