SBR2040CT SBR2040CTF SBR2040CTI SBR2040CTB Using state-of-the-art SBR IC process technology, the following features are made possible in a single device: Major ratings and characteristics Values Characteristics 20 A VRRM 40 V 0.43 -65 to 150 V, typ O C O VF@10A, Tj=125 C Tj (operating/storage) Device optimized for low forward voltage drop to maximize efficiency in Power Supply applications Units IF(AV) Rectangular Waveform ELECTRICAL: * Low Forward Voltage Drop * Reliable High Temperature Operation * Super Barrier Design * Softest, fast switching capability * 150OC Operating Junction Temperature MECHANICAL: * Molded Plastic TO-220AB, TO-262, TO-263, and ITO-220 packages Case Styles SBR2040CT SBR2040CTF Anode 1 3 Anode TO-220AB Anode 1 Common Cathode ITO-220 2 2 2 2 Common Cathode SBR2040CTB SBR2040CTI 3 Anode Anode 1 Common Cathode TO-262 3 Anode Anode 1 Common Cathode 3 Anode TO-263 ________________________________________________________________________________________________ www.apdsemi.com Version 2.0 - April 2006 1 SBR2040CT SBR2040CTF SBR2040CTI SBR2040CTB Maximum Ratings and Electrical Characteristics (at 25OC unless otherwise specified) SYMBOL UNITS VRM VRWM VRRM 40 Volts IO 20 Amps Peak Forward Surge Current - 1/2 60hz IFSM 120 Amps Peak Repetitive Reverse Surge Current (2uS-1Khz) IRRM 2 Amps Instantaneous Forward Voltage (per leg) IF = 10A; TJ = 25OC IF = 10A; TJ= 125OC VF Typ ----- Max 0.53 0.48 Maximum Instantaneous Reverse Current at Rated VRM TJ = 25OC TJ = 125OC IR * Typ ----- Max 0.5 100 DC Blocking Voltage Working Peak Reverse Voltage Peak Repetitive Reverse Voltage Average Rectified Forward Current (Rated VR-20Khz Square Wave) - 50% duty cycle Maximum Rate of Voltage Change (at Rated VR) dv/dt 10,000 Maximum Thermal Resistance JC (per leg) Package = TO-220AB, TO-262, & TO-263 Package = ITO-220 RJC 2 4 TJ -65 to +150 Operating and Storage Junction Temperature Volts mA mA V/uS O C/W O C NOTE: Dice are available for customer applications. * Pulse width < 300 uS, Duty cycle < 2% ________________________________________________________________________________________________ www.apdsemi.com Version 2.0 - April 2006 2 SBR2040CT SBR2040CTF SBR2040CTI SBR2040CTB 100 If, Instantaneous Forward Current (Amps) 100 Ir, Reverse Current (mA) Tj=150C Tj=125C 10 Tj=75C 1 Tj=25C 0.1 0 10 20 30 40 10 Tj=150C Tj=125C 1 Tj=75C Tj=25C 0.1 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 Vf, Instantaneous Forward Voltage (Volts) Vr, Reverse Voltage (Volts) Figure 1: Typical Reverse Current Figure 2: Typical Forward Voltage If, Average Forward Current (Amps) 10 5 0 0 25 50 75 100 125 150 Tc, Case Temp (C) Figure 3: Current Derating, Case APD SEMICONDUCTOR reserves the right to make changes without further notice to any products herein. APD SEMICONDUCTOR makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APD SEMICONDUCTOR assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in APD SEMICONDUCTOR data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. APD SEMICONDUCTOR does not convey any license under its patent rights nor the rights of others. APD SEMICONDUCTOR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APD SEMICONDUCTOR product could create a situation where personal injury or death may occur. Should Buyer purchase or use APD SEMICONDUCTOR products for any such unintended or unauthorized application, Buyer shall indemnify and hold APD SEMICONDUCTOR and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APD SEMICONDUCTOR was negligent regarding the design or manufacture of the part.. 1 Lagoon Drive, Suite 410, Redwood City, CA 94065, USA Ph: 650 508 8896 FAX: 650 508 8865 Homepage: www.apdsemi.com email: info@apdsemi.com ________________________________________________________________________________________________ www.apdsemi.com Version 2.0 - April 2006 3